F6

Axnen F6 3-Axis Portable Smartphone Stabilizer User Manual

1. Introduktion

The Axnen F6 3-Axis Portable Smartphone Stabilizer is designed to enhance your mobile videography and photography experience. It provides smooth, stable footage by compensating for unwanted movements, allowing you to capture professional-quality videos and photos directly with your smartphone. This manual provides detailed instructions on how to set up, operate, and maintain your F6 stabilizer.

Pakkens indhold

  • 1 x Axnen F6 Gimbal Stabilizer
  • 1 x Power Cable (USB)
  • 1 x brugermanual

2. Sikkerhedsoplysninger

  • Udsæt ikke enheden for vand eller fugt.
  • Undgå at tabe eller udsætte enheden for kraftige stød.
  • Opbevares utilgængeligt for børn.
  • Brug kun det medfølgende eller certificerede opladningskabel.
  • Forsøg ikke selv at adskille eller reparere enheden.
  • Arbejd inden for det angivne temperaturområde.

3. Produktet er slutview

Familiarize yourself with the components of your Axnen F6 stabilizer before use.

Diagram of Axnen F6 Gimbal Stabilizer with numbered parts
Figure 1: Axnen F6 Gimbal Stabilizer Parts Diagram

Beskrivelse af dele

  1. joystick: Styrer gimbalens panorerings- og vippebevægelser.
  2. Tænd/sluk + Tilstandsknap: Long press to power on/off. Short press once for Half-follow mode (default is Full-follow mode after power on). Short press twice for Locked mode.
  3. Shooting Mode Button: Activates various shooting modes.
  4. Zoom kontrol: Adjusts zoom level (requires app connection).
  5. Mikroopladningsport: Til opladning af gimbalen.
  6. Pan motor: Styrer vandret rotation.
  7. Tilt motor: Controls vertical rotation.
  8. Balanceknap: Used to adjust the balance of the smartphone.
  9. Rullemotor: Controls rotation along the roll axis.
  10. Smartphone beslag: Holder din smartphone sikkert på plads.
  11. Håndskaft: The main grip of the stabilizer.
  12. 1/4 gevindhul: Til montering på stativer eller andet tilbehør.
Diagram showing 330 degree tilt, 180 degree roll, and 330 degree pan for three-axis stabilization
Figure 2: Three-Axis Stabilization Capabilities

The Axnen F6 offers three-axis stabilization, providing 330° mechanical range for tilt and pan, and 180° for roll, ensuring smooth and stable footage.

4. Opsætning

4.1 Opladning af stabilisatoren

Before first use, fully charge the Axnen F6 stabilizer. Connect the provided USB power cable to the Micro Charging Port (5) on the gimbal and a USB power adapter (not included). The indicator light will show charging status and turn off when fully charged. A full charge provides approximately 6 hours of working time.

4.2 Montering af din smartphone

  1. Extend the smartphone bracket (10).
  2. Carefully place your smartphone into the bracket, ensuring it is centered and secure.
  3. The stabilizer supports smartphones with a width between 58mm and 89mm and a maximum payload of 280g.

4.3 Balancing the Stabilizer

Proper balancing is crucial for optimal performance and battery life. With the smartphone mounted:

  1. Adjust the smartphone's position within the bracket until it remains level when released.
  2. Use the Balance Knob (8) to fine-tune the horizontal balance. The phone should stay balanced even when the gimbal is powered off.

5. Betjeningsvejledning

5.1 Tænd/sluk og valg af tilstand

  • Tænd/sluk: Long press the Power ON/OFF + Mode Switch (2) for a few seconds.
  • Standardtilstand: Upon powering on, the gimbal enters Full-Follow mode.
  • Half-Follow Mode: Short press the Power ON/OFF + Mode Switch (2) once.
  • Låst tilstand: Short press the Power ON/OFF + Mode Switch (2) twice.

5.2 Bluetooth-forbindelse

To unlock full features and control via your smartphone, connect the gimbal via Bluetooth:

  1. Sørg for, at gimbalen er tændt.
  2. Aktiver Bluetooth på din smartphone.
  3. Søg efter available devices and select "Axnen F6" or similar.
  4. Once connected, you can use the dedicated app for advanced controls like zoom (4) and beauty mode.
Smartphone mounted on gimbal showing camera interface with 'One Key Operation' text
Figure 3: One-Key Operation for ease of use

The F6 is designed for easy operation after connecting via Bluetooth, simplifying the learning curve.

5.3 Driftstilstande og funktioner

  • Full-Follow Mode: The gimbal follows both pan and tilt movements of your hand.
  • Half-Follow Mode: The gimbal follows pan movements only, keeping the tilt locked.
  • Låst tilstand: Alle tre akser er låst, hvilket holder kameraet pegende i en fast retning.
  • Sportstilstand: Allows the motor to increase power and react quickly to rapid movements, ideal for capturing fast-moving subjects and creating dynamic transition effects without post-production.
  • Inception Mode (3D Fantasy Mode): The pan motor can rotate a full 360° to create a unique, spinning

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.