Rojeco 2L Automatic Pet Feeder (Model RWSQ-02) User Manual

1. Introduktion

Thank you for choosing the Rojeco 2L Automatic Pet Feeder, Model RWSQ-02. This device is designed to provide consistent and timely meals for your pet, ensuring they maintain a healthy eating schedule. Please read this manual thoroughly before using the feeder to ensure proper operation and to maximize its lifespan.

Sikkerhedsoplysninger

• Dette apparat er kun til indendørs brug.
• Nedsænk ikke hovedenheden i vand eller andre væsker.
• Opbevares utilgængeligt for børn og kæledyr, når det ikke er i brug eller under rengøring.
• Use only the original power adapter provided with the feeder.
• Sørg for, at foderautomaten er placeret på en stabil, plan overflade.
• Only use dry pet food with a diameter suitable for the dispenser mechanism.

2. Produktet er slutview

The Rojeco RWSQ-02 Automatic Pet Feeder consists of several key components designed for easy assembly and use.

Figur 2.1: Forside view of the Rojeco 2L Automatic Pet Feeder.

Figur 2.2: Side view of the Rojeco 2L Automatic Pet Feeder.

Komponenter:

• Madtank: Transparent container for storing dry pet food.
• Hovedenhed: Houses the dispensing mechanism, control panel, and power input.
• Madskål: Stainless steel bowl for pet food.
• Låg: Secures the food tank and keeps food fresh.
• Strømadapter: Til tilslutning af føderen til en stikkontakt.

3. Opsætning

3.1 Udpakning og montering

1. Fjern forsigtigt alle komponenter fra emballagen.
2. Placer hovedenheden på en flad, stabil overflade.
3. Attach the stainless steel food bowl to the base of the main unit, ensuring it clicks securely into place.
4. Place the food tank onto the main unit, aligning it properly.
5. Fastgør låget på madtanken.

3.2 Strømforsyning

• Connect the power adapter to the power input port on the back or side of the main unit.
• Sæt adapteren i en almindelig stikkontakt.
• The feeder will power on, and indicator lights may illuminate.
• Note: This model does not require batteries for primary operation.

3.3 Fyldning af madtanken

1. Remove the lid from the food tank.
2. Pour dry pet food into the tank. Ensure the food kibble size is appropriate for automatic feeders (typically 5-15mm in diameter) to prevent jamming.
3. Overfyld ikke tanken.
4. Sæt låget sikkert på igen.

4. Betjeningsvejledning

The Rojeco RWSQ-02 features a simple button interface for programming meal schedules.

4.1 Kontrolpanel overview

The control panel typically includes buttons for setting time, meals, portions, and a manual feed button. Refer to the markings on your specific unit for exact button functions.

4.2 Indstilling af måltidstider og portioner

1. Indstil aktuel tid: Press and hold the "SET" button (or equivalent) until the time display flashes. Use the "UP" and "DOWN" buttons to adjust the hour and minute. Press "SET" again to confirm.
2. Program Meal 1: Press the "MEAL" button (or equivalent) to enter meal programming mode. The display will show "M1". Use "UP" and "DOWN" to set the desired feeding time for Meal 1. Press "SET" to confirm.
3. Set Portion for Meal 1: After setting the time for Meal 1, the portion size will flash. Use "UP" and "DOWN" to select the number of portions (each portion typically corresponds to a specific volume of food). Press "SET" to confirm.
4. Program Additional Meals: Repeat steps for Meal 2, Meal 3, etc., as supported by your feeder (up to 4 meals are common).
5. Afslut programmering: The feeder will automatically exit programming mode after a few seconds of inactivity, or you can press a designated "EXIT" button if available.

4.3 Manuel fodring

To dispense food manually, press the "MANUAL" button (or equivalent). Each press will dispense one portion of food. This is useful for extra treats or to test the feeder.

4.4 Indikatorlys

The feeder may have indicator lights to show its status:

• Grønt lys: Angiver normal drift.
• Red Light (Flashing/Solid): May indicate a low food level, a jam, or an error. Refer to the troubleshooting section.

5. Vedligeholdelse

Regular cleaning ensures hygiene for your pet and extends the life of your feeder.

5.1 Adskillelse til rengøring

1. Unplug the power adapter from the wall outlet and the feeder.
2. Remove any remaining food from the tank.
3. Remove the lid and the food tank from the main unit.
4. Detach the stainless steel food bowl from the base.

5.2 Rengøringsinstruktioner

• Food Tank and Bowl: Wash these components with mild soap and water. Rinse thoroughly and dry completely before reassembly. These parts are typically dishwasher-safe on the top rack, but hand washing is recommended for longevity.
• Hovedenhed: Tør hovedenhedens yderside af med en blød, tør klud.amp klæde. Nedsænk ikke hovedenheden i vand. Ensure no water enters the control panel or power input.
• Dispenser Mechanism: Use a dry brush or cloth to remove any food residue from the dispenser chute.

5.3 Genmontering

1. Ensure all cleaned parts are completely dry.
2. Reattach the food bowl to the main unit.
3. Place the food tank back onto the main unit.
4. Fastgør låget.
5. Refill with dry pet food and reconnect the power.

6. Fejlfinding

If you encounter issues with your Rojeco Automatic Pet Feeder, refer to the following common problems and solutions:

7. Specifikationer

8. Garanti og support

8.1 Garantioplysninger

The Rojeco 2L Automatic Pet Feeder (Model RWSQ-02) comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details. Keep your purchase receipt as proof of purchase for warranty claims.

8.2 Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Rojeco customer support. Contact details can typically be found on the product packaging, the official Rojeco website, or your purchase platform.

Please have your model number (RWSQ-02) and purchase information ready when contacting support.