ARRMA Wheel Axle and Hub Set (ARA311178) Instruction Manual

1. Produktet er slutview

The ARRMA Wheel Axle and Hub Set, model ARA311178, is designed for RC vehicles. This high-quality set is manufactured from durable material to provide long-lasting performance, especially under extreme bashing conditions. It ensures a precise fit for your vehicle and is built for toughness.

Image 1.1: Components of the ARRMA Wheel Axle and Hub Set.

2. Sikkerhedsoplysninger

ADVARSEL:

• Læs HELE betjeningsvejledningen for at blive fortrolig med produktets egenskaber, før du bruger det. Manglende betjening af produktet korrekt kan resultere i skader på produktet, personlige ejendele og forårsage alvorlig personskade.
• Dette er et sofistikeret hobbyprodukt. Det skal betjenes med forsigtighed og sund fornuft og kræver nogle grundlæggende mekaniske evner.
• Manglende brug af dette produkt på en sikker og ansvarlig måde kan resultere i personskade eller beskadigelse af produktet eller anden ejendom.
• Dette produkt er ikke beregnet til brug af børn uden direkte tilsyn af voksne.
• Må ikke bruges med inkompatible komponenter eller ændre dette produkt på nogen måde uden for instruktionerne fra Horizon Hobby, LLC.
• The product manual contains instructions for safety, operation, and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup, or use, in order to operate correctly and avoid damage or serious injury.

3. Pakkens indhold

The ARRMA Wheel Axle and Hub Set (ARA311178) package includes the following components:

• 4 x hjulaksler
• 4 x Wheel Hexes
• 4 x Stub Axles

Note: The "Wheel Axle and Hub Set" listed in the 'whats_in_the_box' is a general term for these combined components.

4. Installationsvejledning

Follow these steps to install the ARRMA Wheel Axle and Hub Set onto your RC vehicle:

1. Fjern gamle komponenter: Carefully remove the existing wheel axles, hexes, and stub axles from your RC vehicle. Refer to your vehicle's specific manual for detailed disassembly instructions if needed.
2. Install New Axles: Install the new ARRMA wheel axles into the appropriate locations on your RC vehicle.
3. Attach Hexes and Stub Axles: Securely attach the new wheel hexes and stub axles. Ensure all parts are correctly oriented and seated.
4. Sikre fastgørelsesanordninger: Use the appropriate tools to securely fasten all components. Double-check that all screws, pins, or clips are tightened to the manufacturer's specifications.
5. Bekræft justering: After installation, ensure that the wheels are properly aligned and spin freely without obstruction. Check for any excessive play or binding.

Always use appropriate tools and follow safety precautions during installation.

5. Vedligeholdelse

To ensure the longevity and optimal performance of your ARRMA Wheel Axle and Hub Set, consider the following maintenance tips:

• Regelmæssig inspektion: Periodically inspect the wheel axles, hexes, and stub axles for signs of wear, damage, or bending. Replace any damaged components immediately.
• Rensning: After use, especially in dirty or wet conditions, clean the components to remove dirt, debris, and moisture. A soft brush and compressed air can be effective.
• Smøring: While these parts typically do not require extensive lubrication, ensure that any moving parts they interact with (e.g., bearings) are properly maintained according to your RC vehicle's manual.
• Sikre fastgørelsesanordninger: Regularly check that all fasteners holding the axles and hubs are tight. Vibrations during operation can sometimes loosen screws.

6. Specifikationer

7. Garanti og support

For warranty information, technical support, or replacement parts, please contact ARRMA or Horizon Hobby, LLC directly through their official webwebstedet eller kundeservicekanaler. Behold din købskvittering som købsbevis.

You can visit the official ARRMA store for more information: ARRMA Store on Amazon