VGR V-333

VGR V-333 Rechargeable Portable Rotary Electric Shaver

Brugermanual

1. Introduktion

Thank you for choosing the VGR V-333 Rechargeable Portable Rotary Electric Shaver. This manual provides essential information for the safe and effective use, maintenance, and care of your new shaver. Please read these instructions thoroughly before first use and keep them for future reference.

Two VGR V-333 electric shavers, one silver and one black, showcasinproduktdesignet.

Image 1: VGR V-333 Electric Shaver (Silver and Black models)

2. Sikkerhedsinstruktioner

To ensure safe operation and prevent injury or damage to the device, please observe the following precautions:

  • Use the shaver with caution to avoid cuts or skin irritation.
  • Keep the device away from water during charging to prevent electric shock.
  • This product is not suitable for use by children. Keep out of reach of minors.
  • Du må ikke selv skille barbermaskinen ad eller forsøge at reparere den. Kontakt kvalificeret personale for service.
  • Avoid dropping the shaver or subjecting it to strong impacts.
  • Do not use the shaver if the blades or foil are damaged, as this may cause injury.

3. Opsætning og opladning

3.1 Indledende opladning

Before using your VGR V-333 shaver for the first time, ensure the device is fully charged. This helps to optimize battery life and performance.

3.2 Opladningsprocedure

  1. Tilslut USB-opladerkablet til barbermaskinens opladningsport.
  2. Plug the other end of the USB cable into any standard USB power source (e.g., computer, wall adapter, power bank).
  3. The LCD screen on the shaver will display the battery percentage, der angiver opladningsstatus.
  4. Når den er fuldt opladet, skal du afbryde barbermaskinen fra strømkilden.

The shaver has a battery life of approximately 60 minutes on a full charge.

VGR V-333 shaver showing the USB charging port and the shaver head opened for cleaning.

Image 2: Shaver connected to USB for charging and head opened

4. Betjeningsvejledning

4.1 Preparing for Shaving

The VGR V-333 is water-resistant (IPX6), allowing for both wet and dry shaving.

  • Til tørbarbering: Sørg for, at dit ansigt er rent og tørt, inden du barberer dig.
  • Til vådbarbering: You may wet your face and apply shaving cream or gel for a smoother, more comfortable shave.

4.2 Shaving Your Beard

  1. Tryk på tænd/sluk-knappen for at tænde for barbermaskinen.
  2. Gently move the shaver along the contour of your face, using small circular motions or straight strokes against the direction of hair growth.
  3. Apply light pressure. Do not press too hard, as this can cause irritation or damage to the blades.
  4. Continue shaving until the desired result is achieved.
  5. Efter barberingen skal du trykke på tænd/sluk-knappen igen for at slukke barbermaskinen.

5. Vedligeholdelse og rengøring

Regular cleaning and proper maintenance will ensure the longevity and optimal performance of your VGR V-333 shaver.

5.1 Rengøring efter brug

  1. Sluk barbermaskinen, og afbryd den fra enhver strømkilde.
  2. Open the shaver head by pressing the release button or sliding the cover as indicated (refer to Image 3).
  3. Rinse the shaver head and blades under running water to remove hair clippings and shaving cream residue. The IPX6 water resistance allows for easy rinsing.
  4. Use the included cleaning brush (if applicable) to remove any stubborn hair particles from the blades and inner chamber.
  5. Allow the shaver head and blades to air dry completely before closing the head and storing the device.
A hand demonstrating how to open the shaver head by pushing a button or lever.

Image 3: Opening the shaver head for cleaning

5.2 Inspektion af blad

Periodically inspect the rotary blades for any signs of wear or damage. Replace them if necessary to maintain optimal shaving performance.

Nærbillede view of the VGR V-333 shaver's rotary stainless steel blades.

Image 4: Close-up of the rotary blades

5.3 Opbevaring

Store the shaver in a safe, dry place, away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storage.

6. Fejlfinding

If you encounter any issues with your VGR V-333 shaver, please refer to the following common troubleshooting tips:

  • Barbermaskinen tænder ikke: Ensure the battery is fully charged. Check the LCD screen for battery level.
  • Dårlig barberingsevne: Clean the shaver head and blades thoroughly. The blades might be dull and require replacement.
  • Hudirritation: Ensure proper shaving technique (light pressure, correct angle). Make sure your skin is prepared (wet or dry as preferred).
  • Opladningsproblemer: Verify the USB cable and power source are working correctly. Ensure the charging port is free of debris.

Hvis problemet fortsætter, bedes du kontakte kundesupport.

7. Specifikationer

FeatureSpecifikation
MærkeVGR
ModelnummerV-333
Dimensioner19.7 x 12.8 x 7.8 cm
Vægt510 gram
Anbefalet brugSkæg
Særlige funktionerHøj effektivitet
StrømkildeBatteridrevet (genopladelig)
Batterilevetid60 minutter
FarveSort
BladmaterialeRustfrit stål
HovedtypeRotary
VandmodstandIPX6
Inkluderede komponenterBatteri

8. Garanti og support

For garantioplysninger eller teknisk support henvises til garantikortet, der fulgte med dit produkt, eller kontakt producenten direkte. Gem din købskvittering som købsbevis.

For further assistance, please visit the official VGR webwebsted eller kontakt deres kundeserviceafdeling.

© 2026 VGR. Alle rettigheder forbeholdes.