Retro-Bit SEGA Saturn PRO 2.4GHz Wireless Pro Controller User Manual

1. Introduktion

This manual provides detailed instructions for the setup, operation, and maintenance of your Retro-Bit SEGA Saturn PRO 2.4GHz Wireless Pro Controller. This controller is designed to enhance your gaming experience across multiple platforms, including SEGA Saturn, PC, Mac, and Nintendo Switch, offering modern features while retaining the classic feel.

2. Produktfunktioner

• Multikompatibilitet: Includes dedicated SEGA Saturn and USB wireless receivers for broad compatibility.
• Præcisionskontrol: Features dual Hall Effect analog sticks for enhanced durability and precise input.
• Avanceret funktionalitet: Incorporates dual analog rumble motors for immersive feedback, four shoulder buttons, and dedicated Home and Select buttons.
• Genopladeligt batteri: Equipped with a built-in 500 mAh battery and a USB-C fast charging port. A 3ft/1m USB-C to USB charge cable is included.
• 3D Control Pad Support: Enabled by macro via the console receiver for compatible games.

3. Pakkens indhold

• Retro-Bit SEGA Saturn PRO 2.4GHz Wireless Pro Controller
• SEGA Saturn 2.4 GHz trådløs modtager
• USB 2.4 GHz trådløs modtager
• USB-C til USB-opladerkabel (1 m)

Image: The included SEGA Saturn and USB wireless receivers.

4. Controllerlayout

The Retro-Bit SEGA Saturn PRO controller features a familiar layout with modern enhancements. Below is a general overview:

Billede: Forside view of the Retro-Bit SEGA Saturn PRO Wireless Controller.

• D-Pad: Retningsbestemt input.
• Handlingsknapper (A, B, C, X, Y, Z): Standard spilindgange.
• Analoge pinde: Dual Hall Effect analog sticks for precise 3D movement.
• Start knap: Spilstart/pause.
• Hjemknappen: Adgang til systemmenu.
• Vælg knap: Yderligere spilfunktioner.
• Skulderknapper (V, H, ZL, ZR): Four shoulder buttons for expanded control.
• USB-C-port: Til opladning af controlleren.

Billede: Top view highlighting the shoulder buttons and USB-C charging port.

5. Opsætning og tilslutning

Your controller comes with two receivers for different platforms.

5.1. Forbindelse til SEGA Saturn-konsollen

1. Sæt SEGA Saturn 2.4GHz trådløs modtager i en controllerport på din SEGA Saturn-konsol.
2. Power on your SEGA Saturn console.
3. Turn on the Retro-Bit controller. The controller should automatically pair with the receiver. An indicator light on both the controller and receiver will confirm a successful connection.

5.2. Tilslutning til pc, Mac eller Nintendo Switch

1. Sæt den trådløse USB 2.4 GHz-modtager i en ledig USB-port på din pc, Mac eller Nintendo Switch-dock.
2. Tænd din enhed.
3. Turn on the Retro-Bit controller. The controller should automatically pair with the USB receiver. An indicator light on both the controller and receiver will confirm a successful connection.
4. For PC/Mac, ensure necessary drivers are installed if prompted by your operating system.

Image: The controller is compatible with USB-enabled devices via the USB receiver and SEGA Saturn consoles via the console receiver.

6. Opladning af controlleren

The controller features a built-in 500 mAh rechargeable Li-ion battery. To charge:

1. Connect the included USB-C to USB charge cable to the USB-C port on the front of the controller.
2. Connect the other end of the cable to a powered USB port (e.g., computer, USB wall adapter).
3. The charging indicator lights on the controller will show the charging status. Once fully charged, the lights will indicate completion or turn off.

Image: The controller is rechargeable via its USB-C port.

7. Firmwareopdatering

It is highly recommended to update the controller's firmware before initial use to ensure optimal performance and access to the latest features.

Instructions for the firmware update can be found on the official Retro-Bit webwebsted under Support-sektionen.

Besøg: retro-bit.com/support

Image: Firmware update information, directing users to the Retro-Bit support webwebsted.

8. Fejlfinding

• Controlleren forbinder ikke: Ensure both the controller and receiver are powered on and within range. Check that the correct receiver is used for the intended console/device. Try re-pairing by pressing the sync buttons on both the controller and receiver.
• Inputforsinkelse eller afbrydelser: Ensure there are no major obstructions or sources of interference (e.g., other 2.4GHz devices, large metal objects) between the controller and receiver. Ensure the controller is fully charged.
• Analog Stick Dead Zone/Inaccuracy: If experiencing issues with analog stick responsiveness or large dead zones, ensure the controller's firmware is updated to the latest version. On PC, you may need to calibrate the controller through your operating system's game controller settings.
• Controlleren oplader ikke: Verify the USB-C cable is securely connected to both the controller and a powered USB source. Try a different USB port or cable.

9. Specifikationer

10. Pleje og vedligeholdelse

• Keep the controller and receivers dry. Avoid exposure to moisture or extreme temperatures.
• Rengør controlleren med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende materialer.
• Opbevar controlleren et sikkert sted, når den ikke er i brug, for at forhindre skader.
• Charge the controller regularly to maintain battery health, even if not used frequently.

11. Officiel produktvideo

12. Support og garanti

For technical support, troubleshooting assistance, or warranty information, please visit the official Retro-Bit support webwebsted:

Webwebsted: retro-bit.com/support

Gem venligst din købsbevis i tilfælde af garantikrav.