WONLINK WL-AP7202-USHS1-YAM

WONLINK AC1200 Outdoor Gigabit Wireless Access Point

Model: WL-AP7202-USHS1-YAM

Indledning

The WONLINK AC1200 Outdoor Gigabit Wireless Access Point is designed to extend and enhance your Wi-Fi network outdoors. It supports dual-band operation (2.4GHz and 5GHz) and multiple operating modes, making it suitable for various outdoor networking needs. Its robust, weatherproof design ensures reliable performance in diverse environmental conditions.

Pakkens indhold

Bekræft, at alle nedenstående varer er til stede i din pakke:

  • 1 x Outdoor WiFi Extender
  • 1 x 48V PoE Adapter
  • 2 x Stainless Ties
  • 2 x skruer
  • 2 x Silicone Seals

Nøglefunktioner

  • 1200Mbps Outdoor WiFi Extender: Compliant with IEEE 802.11 ac/a/b/g/n network standards, offering speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz. Ideal for HD streaming and online gaming.
  • Flexible Installation & Gigabit Ports: Integrated Power over Ethernet (PoE) support allows installation in locations without direct power outlets. Features dual Gigabit (1000Mbps) LAN/WAN Ethernet ports for high-speed network connections.
  • Flere driftstilstande: Supports Repeater, AP (Access Point), Router, and Bridge modes to accommodate various network environments and applications.
  • Advanced WiFi Security Protocol: Incorporates 128-bit encryption and WPA/WPA2/WPA-PSK/WPA2-PSK protocols to secure your network and prevent unauthorized access.
  • Outdoor Weatherproof and Moisture-proof Design: IP66 certified weatherproof and heat-resistant shell with a waterproof silicone ring ensures continuous operation in harsh outdoor conditions, including extreme cold, heat, or humidity (-10°C to 60°C).

Produkt overview

WONLINK AC1200 Outdoor Gigabit Wireless Access Point with two antennas and blue signal rings

Figur 1: Forside view of the WONLINK AC1200 Outdoor Gigabit Wireless Access Point, showing its two antennas and signal indicators.

Diagram illustrating 5.8G and 2.4G dual-band speeds of the AC1200 Access Point

Figure 2: High-speed AC1200 Dual Band Outdoor Access Point capabilities, highlighting 867Mbps on 5.8G and 300Mbps on 2.4G.

Opsætningsinstruktioner

Power over Ethernet (PoE) Connection

The device supports Power over Ethernet (PoE), allowing both power and data transmission over a single Ethernet cable. This simplifies installation, especially in outdoor environments where power outlets may not be readily available.

Diagram showing Power Over Ethernet connection from a 48V PoE adapter to the outdoor access point

Figure 3: Illustration of the Power Over Ethernet (PoE) setup, demonstrating how the 48V PoE adapter connects to the device via an Ethernet cable, supporting distances up to 100 meters.

Initial Setup via PC

Follow these steps for initial configuration using a computer:

  1. Connect to the device's default Wi-Fi network, typically named "WONLINK-XXXX-2G" or "WONLINK-XXXX-5G", using your computer.
  2. Åbn a web browser and enter the default IP address "192.168.10.1" in the address bar.
  3. Enter the default username "admin" and password "admin" to log in.
  4. Select the desired operating mode (e.g., AP Mode) and set a new IP address. The new IP address must be on the same subnet as your router, but the last digit must be different.
  5. Enter your desired Wi-Fi password. It is recommended to use a strong password different from your router's password.
  6. Click "Finish" to apply the configuration. Once successful, you can enjoy your Wi-Fi network.
Step-by-step diagram for Easy Setup with PC, showing connection to Wi-Fi, logging into web interface, selecting AP mode, entering Wi-Fi password, and finishing setup.

Figure 4: Visual guide for the PC-based setup process.

Driftstilstande

The WONLINK AC1200 supports multiple operating modes to suit various network configurations:

  • AP-tilstand (adgangspunkt): Konverterer en kablet netværksforbindelse til en trådløs, så flere enheder kan oprette forbindelse trådløst.
  • Repeater-tilstand: Extends the coverage of an existing Wi-Fi network by receiving the wireless signal and re-transmitting it.
  • Routertilstand: Functions as a primary router, connecting to a modem and providing network access to connected devices.
  • Brotilstand: Connects two separate networks, often used to link wired networks wirelessly.
Diagram illustrating AP, Router, Repeater, and Bridge operating modes for the outdoor access point

Figur 5: Overview of the multiple working modes supported by the device.

Opretholdelse

To ensure optimal performance and longevity of your outdoor access point, consider the following maintenance guidelines:

  • Regelmæssig inspektion: Periodically check the device and its connections for any signs of wear, damage, or loose cables.
  • Renhed: Keep the device free from dust, dirt, and debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners or aerosols.
  • Miljøbeskyttelse: While the device is IP66 weatherproof, ensure it is installed in a location that minimizes direct exposure to extreme weather conditions where possible, such as heavy snow accumulation or direct, prolonged sunlight in very hot climates.
  • Firmwareopdateringer: Tjek producentens website periodically for firmware updates. Keeping the firmware updated can improve performance, add new features, and enhance security.
Graphic showing IP67 Weatherproof Enclosure features: Water Proof, Cold Protection, Lightning Protection, Windproof, High Temperature Resistance

Figure 6: The device features an IP67 weatherproof enclosure, providing protection against water, cold, lightning, wind, and high temperatures.

Fejlfinding

If you encounter issues with your WONLINK AC1200 Outdoor Gigabit Wireless Access Point, try the following steps:

  • Ingen strøm: Ensure the PoE adapter is properly connected to a power source and the Ethernet cable is securely plugged into both the adapter and the device. Check the power indicator light on the PoE adapter.
  • Ingen internetforbindelse: Verify that your main router or modem is functioning correctly and has an active internet connection. Check all Ethernet cable connections.
  • Svagt signal eller lav hastighed: Ensure the device is positioned optimally, away from obstructions and sources of interference. Consider adjusting the antennas. If in Repeater mode, ensure the device is within good range of the main router.
  • Kan ikke få adgang Web Interface: Double-check the IP address entered in the browser. Ensure your computer is connected to the device's Wi-Fi network or directly via Ethernet. Try clearing your browser's cache or using a different browser.
  • Nulstilling af enheden: If issues persist, you may need to perform a factory reset. Locate the reset button (often a small pinhole) and press and hold it for approximately 5-10 seconds while the device is powered on. This will restore the device to its default factory settings.

Specifikationer

FeatureVærdi
ModelnummerWL-AP7202-USHS1-YAM
Standard for trådløs kommunikation802.11a/b/g/n, 802.11ac
Dataoverførselshastighed1200 megabit pr. sekund
FrekvensbåndsklasseDobbeltbånd (2.4 GHz og 5 GHz)
Varens vægt1.31 pund
Pakkedimensioner8.94 x 7.87 x 2.32 tommer
Vejrbestandig vurderingIP66 (as per feature bullets) / IP67 (as per image) - Note: Conflicting information, using IP66 from feature bullets as primary.
Driftstemperatur-10°C til 60°C

Garanti og support

For detailed warranty information and technical support, please refer to the official WONLINK website or contact their customer service. A digital copy of the Instructions for Use (IFU) is available in PDF format for further reference.

Download brugsanvisning (PDF)

© 2023 WONLINK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.