Vigtige sikkerhedsinstruktioner
Please read all instructions carefully before using this RENPHO 3D Foot Massager. Keep this manual for future reference. This device is a controlled medical device (Certification Number: 305AKBZX00048000) intended for general household use as a substitute for massage.
- Må ikke anvendes, hvis du har præeksisterende medicinske tilstande, uden at konsultere en læge.
- Opbevares utilgængeligt for børn.
- Do not immerse the unit in water or use it in wet environments.
- Tag stikket ud af enheden, når den ikke er i brug, eller før rengøring.
- Forsøg ikke at reparere eller adskille enheden selv. Kontakt kundesupport for at få hjælp.
- Sørg for, at netledningen ikke er beskadiget eller klemt.
Produkt overview
Nøglefunktioner
- 3-in-1 Massage: Combines air compression, shiatsu kneading, and heat therapy.
- Justerbar intensitet: 3 levels for air pressure and 3 levels for kneading strength.
- Beroligende varmefunktion: Warms feet to 40℃-45℃ to promote circulation.
- Automatisk timer: 15-minute auto-off function for safety.
- Hygiejnisk design: Removable and washable antibacterial fabric cover.
Pakkens indhold
- RENPHO 3D Foot Massager Main Unit
- Instruktionsmanual
Opsætning
Follow these steps to set up your foot massager:
- Pakker ud: Tag forsigtigt fodmassageren og alt tilbehør ud af emballagen.
- Placering: Placer massageapparatet på en flad, stabil overflade. Sørg for, at der er tilstrækkelig plads omkring apparatet til korrekt ventilation.
- Tilslut strøm: Sæt netledningen i en passende stikkontakt.
- Forbered til brug: Ensure the inner fabric covers are properly installed before placing your feet inside.
Billede: Forside view of the RENPHO 3D Foot Massager, ready for use.
Betjeningsvejledning
The control panel allows you to manage all functions of the foot massager.
Billede: Detaljeret view af kontrolpanelet med forskellige funktionsknapper.
Kontrol og funktioner
- Tænd/sluk-knap (⏻): Tryk for at tænde eller slukke for enheden.
- Stop knap (■): Press for emergency stop, halting all functions immediately.
- Kneading Button (⟳): Adjusts kneading intensity through 3 levels (Low, Medium, High). Cycles from Medium → High → Low with each press when power is on.
- Heater Button (SSS): Activates or deactivates the heating function. The heater warms the foot area to approximately 40℃-45℃. For optimal heating, use for more than 10 minutes.
- Air Pressure Button (◎): Adjusts air compression intensity through 3 levels (Low, Medium, High). Cycles from Medium → High → Low with each press when power is on.
Brug af massageapparatet
- Sit comfortably and place your feet into the massager.
- Tryk på tænd/sluk-knappen for at tænde enheden.
- Select your desired air pressure level using the Air Pressure button. The 5 layers of airbags will envelop your feet, providing compression.
- Adjust the kneading intensity with the Kneading button. Internal rollers and kneading balls will stimulate pressure points on your soles.
- Activate the Heat function if desired for added warmth and improved circulation.
- The massager has a 15-minute automatic timer. It will turn off automatically after the session. You can manually stop it at any time using the Power or Stop button.
Image: Air compression massage on the foot.
Image: Shiatsu kneading massage with rollers.
Image: Heat function applied to the foot.
Opretholdelse
Korrekt vedligeholdelse sikrer din fodmassageapparats levetid og hygiejne.
Rengøring af ydersiden
- Tag altid stikket ud af stikkontakten før rengøring.
- Tør den ydre overflade af med en blød,amp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Sørg for, at der ikke kommer væske ind i enheden.
Cleaning the Inner Fabric Covers
The inner fabric covers are removable and washable for hygiene.
- Unzip and remove the inner fabric covers from the foot inserts.
- Hand wash the covers with mild detergent and cold water.
- Air dry completely before reattaching them to the massager. Do not tumble dry or iron.
Image: Removable inner fabric cover being washed.
Fejlfinding
Hvis du støder på problemer, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tændes ikke. | Netledningen er ikke korrekt tilsluttet. Ingen strøm fra stikkontakten. | Ensure the power cord is securely plugged into both the device and a working electrical outlet. Test the outlet with another device. |
| Massageintensiteten føles svag. | Intensitetsindstillingen er for lav. | Press the Kneading or Air Pressure button to increase the intensity level. |
| Varmefunktionen er ikke mærkbar. | Heater not activated. Room temperature is low. Not enough time for heating. | Ensure the Heater function is turned on. Allow at least 10 minutes for the heater to reach optimal temperature. Room temperature can affect perceived warmth. |
| Usædvanlig støj under drift. | Normal operating sounds. Foreign object inside. | Some operational noise from the air pump and rollers is normal. If the noise is excessive or unusual, discontinue use and contact customer support. |
Tekniske specifikationer
| Specifikation | Værdi |
|---|---|
| Produkt Modelnummer | RP-FM069R |
| Fabrikant | RENPHO |
| Produktmål (L x B x H) | Ca. 48 cm x 43 cm x 37 cm |
| Produktets vægt | Ca. 5.7 kg |
| Strømkilde | Elektrisk med ledning |
| Target Body Part | Fødder |
| Air Pressure Levels | 3 (40-80kPa ±15%) |
| Kneading Frequency | L: 15±5, M: 25±5, H: 35±5 times/minute |
| Varmelegemets temperatur | Below 50℃ (Optimal 40℃-45℃) |
| Nominel driftstid | 10 minutter |
| Medical Device Certification No. | 305AKBZX00048000 |
Garanti og support
Garantioplysninger
RENPHO products come with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official RENPHO webwebstedet for detaljerede garantivilkår og -betingelser, der er specifikke for din region.
Kundesupport
For any questions, technical assistance, or warranty claims, please contact RENPHO customer support:
- Webwebsted: Visit the official RENPHO webwebsted for ofte stillede spørgsmål og kontaktoplysninger til support.
- E-mail: Refer to your warranty card or the RENPHO webwebstedet for den relevante support-e-mailadresse.
- Telefon: Check the RENPHO webhjemmeside for regionale kundeservicetelefonnumre.
When contacting support, please have your product model number (RP-FM069R) and purchase details ready.