1. Vigtige sikkerhedsoplysninger
Læs venligst denne manual omhyggeligt inden installation og brug. Gem denne manual til senere brug.
- Vægt kapacitet: Do not exceed the maximum weight capacity of 19.8 lbs (9 kg) per arm. Exceeding this limit may result in instability and potential injury.
- Skærmstørrelse: Denne beslag er designet til skærme mellem 13 og 32 tommer.
- VESA-kompatibilitet: Ensure your monitor has VESA mounting patterns of 75x75mm or 100x100mm.
- Skrivebords tykkelse: For C-clamp installation, your desk thickness must be between 0.39" and 3.35" (10-85mm). For grommet installation, your desk thickness must be between 0.39" and 2.76" (10-70mm) with a hole diameter between 0.39" and 2.36" (10-60mm).
- Forsamling: Assemble the product according to the instructions. Improper assembly may cause damage or injury.
- Bevægelige dele: Be aware of pinch points when adjusting the monitor arms.
- Opretholdelse: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er fastgjort.
2. Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede, før installationen påbegyndes. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.
- Hovedpol
- Monitorarme (2)
- VESA-plader (2)
- Skrivebord Clamp Grundlag
- Grommet Base Komponenter
- Hardware Kit (various screws, washers, spacers)
- Allen Keys (for assembly and adjustment)
- Kabelhåndteringsklip
Billede: Overview of the BONTEC Dual Monitor Mount GDM7504, showing the dual arms, central pole, and both C-clamp og muligheder for montering af gummiringen.
3. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | GDM7504 |
| Skærmstørrelseskompatibilitet | 13-32 tommer |
| Vægtkapacitet (pr. arm) | Op til 19.8 lbs (9 kg) |
| VESA-kompatibilitet | 75x75mm, 100x100mm |
| Skrivebord Clamp Tykkelse | 0.39" - 3.35" (10-85 mm) |
| Grommet Mount Thickness | 0.39" - 2.76" (10-70 mm) |
| Diameter på maljehul | 0.39" - 2.36" (10-60 mm) |
| Materiale | Metal |
| Farve | Sort |
| Gas Spring Force | 750 N·M |
| Bevægelse | Vip, drej, roter |
Image: Illustration of VESA compatibility (75x75mm, 100x100mm) and weight capacity (9kg) for monitors mounted on the stand.
4. Opsætning og installation
4.1 Kontrol før installation
- Confirm your monitor's weight and size are within the specified limits.
- Verify your monitor has VESA 75x75mm or 100x100mm mounting holes.
- Check your desk thickness and grommet hole diameter (if applicable) against the specifications.
4.2 Mounting Base Installation
Choose either the C-Clamp or Grommet Base method.
Image: Visual representation of the two installation methods: Desk Clamp and Grommet Base, with corresponding desk thickness and hole diameter requirements.
4.2.1C-Clamp Installation
- Fastgør C-clamp components to the main pole base.
- Place the assembled clamp på kanten af dit skrivebord.
- Spænd clamp screw until the mount is securely fastened to the desk. Ensure the silicone sleeve and EVA pad are in place to protect the desk surface.
4.2.2 Montering af gummibase
- Adskil C-cl'enamp components from the main pole base if they are attached.
- Insert the grommet bolt through the desk hole and secure it from underneath with the provided plate and nut.
- Attach the main pole to the grommet base.
4.3 Assemble the Arms and Attach VESA Plates
- Slide the monitor arms onto the main pole at your desired height and secure them.
- Attach the VESA plates to the back of your monitors using the appropriate screws from the hardware kit. Hand screws are provided for easy installation without a screwdriver.
Image: Step-by-step guide illustrating the attachment of the VESA plate to the monitor using hand screws.
4.4 Attach Monitors to Arms
- Carefully slide the monitor (with VESA plate attached) onto the arm's mounting head.
- Ensure the monitor is securely locked into place.
4.5 Kabelstyring
Før dine skærmkabler gennem de integrerede kabelklemmer på armene og ned langs hovedstangen for at opretholde en ryddelig arbejdsplads.
5. Betjeningsvejledning
5.1 Justering af skærmposition
The gas spring arms allow for smooth and effortless adjustment of your monitors.
- Højdejustering: Gently push or pull the monitor up or down to achieve the desired height.
- Vip: Vip skærmen op eller ned for at reducere genskin og optimere viewing angle (up to ±90°).
- Drejelig: Swivel the monitor left or right (up to ±90°) to share your screen or change viewing retning.
- Rotation: Drej skærmen 360° fra liggende til stående retning.
Image: Illustration demonstrating the tilt (±90°) and swivel (±90°) capabilities of the monitor mount.
Image: Detailed diagram showing the tilt (±90°), swivel (±90°), and 360° rotation functionalities of the monitor mount.
Image: Diagram showing the maximum height (695mm) and maximum extension (570mm) achievable with the monitor arms.
5.2 Justering af gasfjederspænding
The gas spring tension may need to be adjusted to properly support your monitor's weight. Use the provided Allen key.
- If the monitor sags or drops, turn the adjustment screw clockwise to increase tension.
- If the monitor is difficult to move down or stays too high, turn the adjustment screw counter-clockwise to decrease tension.
- Adjust gradually and test the movement until the monitor stays in position when released.
Billede: Nærbillede view of the gas spring mechanism within the monitor arm, highlighting its robust construction.
6. Vedligeholdelse
- Rensning: Tør holderen af med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Periodiske kontroller: Regularly check all screws and connections to ensure they remain tight and secure. Re-tighten if necessary.
- Gasfjeder: The gas spring is designed for long-term use and typically requires no maintenance. If adjustments become difficult, re-check tension settings.
7. Fejlfinding
- Overvåg Sags/Drops: The gas spring tension is too low. Increase tension by turning the adjustment screw clockwise with the provided Allen key.
- Monitor is Too Stiff/Won't Move Down: Gasfjederens spænding er for høj. Reducer spændingen ved at dreje justeringsskruen mod uret.
- Mount is Unstable: Sørg for C-clamp or grommet base is securely tightened to the desk. Check that all arm connections are firm. Verify monitor weight is within limits.
- Monitor Not Level: Adjust the tilt mechanism on the VESA plate. Some VESA plates allow for minor rotational adjustment to level the screen.
8. Garanti og support
BONTEC products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BONTEC webwebsted.
Please have your model number (GDM7504) and purchase information ready when contacting support.
