1. Introduktion
This manual provides detailed instructions for the safe and proper installation and use of the Maclean MC-481 Ultra-Flat Tiltable TV Wall Mount. This universal wall mount is designed for LCD, LED, QLED, and OLED televisions ranging from 37 to 80 inches, supporting a maximum weight of 75 kg. Its slim profile allows the TV to be mounted close to the wall, creating a clean and modern aesthetic. Please read these instructions thoroughly before beginning installation.
2. Sikkerhedsoplysninger
ADVARSEL: Improper installation or use of this product can result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, contact a qualified professional.
- Sørg for, at monteringsfladen sikkert kan bære den samlede vægt af beslaget og dit fjernsyn.
- Overskrid ikke den maksimale belastningskapacitet på 75 kg (165 lbs).
- Kontroller VESA-kompatibiliteten med dit fjernsyn før installation.
- Use only the provided hardware or manufacturer-approved alternatives.
- Always use a spirit level to ensure the mount is installed horizontally.
- Hold børn og kæledyr væk under installationen.
3. Pakkens indhold
Please check that all components are present and undamaged before installation. If any parts are missing or defective, contact your retailer.
- Wall Plate Assembly with integrated spirit level
- TV-beslag (2 stk.)
- Set of wall mounting screws and anchors
- Set of TV mounting screws (various sizes)
- Instruktionsmanual
4. Specifikationer
| Model | MC-481 |
| Mærke | Maclean |
| Kompatible tv-størrelser | 37" - 80" (or larger if VESA and weight compatible) |
| Maksimal belastningskapacitet | 75 kg (165 lbs) |
| VESA-kompatibilitet | 200x200, 300x200, 400x200, 300x300, 400x300, 400x400, 600x400 mm |
| Afstand fra væg | 95 mm |
| Materiale | Metal (Powder-coated black) |
| Bevægelsestype | vipbar |
5. Opsætning og installation
Følg disse trin omhyggeligt for at installere dit TV-vægbeslag.
5.1. Prepare the TV
- Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at forhindre, at skærmen beskadiges.
- Identificer VESA-monteringshullerne på bagsiden af dit tv.
- Select the appropriate screws from the provided hardware kit that fit your TV's VESA holes. Ensure the screws are not too long, which could damage internal components.
- Attach the two TV brackets to the back of your television using the selected screws. Ensure they are securely fastened and oriented correctly (usually with the hooks facing upwards).
5.2. Monter vægpladen
- Determine the desired height for your TV. Mark the position for the wall plate on the wall.
- Hold the wall plate against the wall at the marked position. Use the integrated spirit level to ensure it is perfectly horizontal.
- Marker borepunkterne gennem hullerne på vægpladen.
- Drill pilot holes at the marked points. Use an appropriate drill bit for your wall type (e.g., concrete, brick, wood stud).
- Insert wall anchors into the drilled holes if required for your wall type.
- Secure the wall plate to the wall using the provided wall mounting screws. Ensure it is firmly attached and level.
5.3. Hang the TV
- With assistance, carefully lift the television.
- Align the TV brackets with the wall plate and gently lower the TV, ensuring the hooks on the TV brackets engage with the wall plate.
- Once the TV is securely hanging, engage the safety locking mechanisms on the bottom of the TV brackets to prevent accidental dislodgement.
6. Betjening og justeringer
The Maclean MC-481 mount features a tiltable design, allowing for minor angle adjustments.
6.1. Tilting the TV
- To adjust the tilt angle, carefully loosen the tilt adjustment screws on the TV brackets.
- Juster tv'et til den ønskede vinkel.
- Tighten the tilt adjustment screws firmly to secure the TV in place.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer levetiden og sikker drift af dit TV-vægbeslag.
- Rensning: Tør holderen af med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Inspektion: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre. Spænd efter om nødvendigt.
- Skade: Hvis nogen del af monteringen ser beskadiget eller slidt ud, skal du stoppe med at bruge den og kontakte kundesupport for at få reservedele eller rådgivning.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| TV'et er ikke i vater efter installation. | Vægpladen er ikke installeret i vater. | Remove TV, re-level and re-mount the wall plate using a spirit level. |
| TV'et føles ustabilt på beslaget. | Screws not fully tightened; safety locks not engaged. | Ensure all mounting screws are tight. Verify safety locking mechanisms are engaged. Do not exceed weight capacity. |
| Kan ikke fastgøre TV-beslag til TV'et. | Forkert skruestørrelse eller uoverensstemmelse i VESA-mønsteret. | Refer to your TV manual for correct VESA pattern and screw size. Use appropriate screws from the kit. |
9. Garanti og support
Maclean products are designed for durability and performance. For warranty information, please refer to the terms and conditions provided at the time of purchase or visit the official Maclean webwebsted.
For technical support, missing parts, or any questions regarding your Maclean MC-481 TV Wall Mount, please contact your retailer or Maclean customer service.
Fabrikant: Maclean
Oprindelsesland: Kina