Generisk rumaldertabel Lamp Instruktionsmanual

Indledning

Tak for købetasing the Generic Space Age Table LampDenne manual indeholder vigtige oplysninger til sikker og effektiv brug af din nye lamp. Please read these instructions thoroughly before assembly and operation, and retain them for future reference.

Billedbeskrivelse: This image shows the Generic Space Age Table Lamp in its unlit state, featuring its distinctive amber glass UFO-shaped shade, white spherical globe, and chrome-finished metal base, resting on a dark wooden bedside table.

Vigtige sikkerhedsinstruktioner

• Sørg for, at strømforsyningen voltage matcher lamp's requirements before plugging in.
• Betjen ikke lamp with a damaged cord or plug. If damaged, contact qualified service personnel.
• Tag stikket ud af lamp from the power outlet before cleaning or changing the light bulb.
• Nedsænk ikke lamp i vand eller anden væske.
• Behold lamp væk fra varmekilder og direkte sollys.
• Denne lamp er kun beregnet til indendørs brug.
• Use only the specified bulb type (E27 LED) to avoid overheating or damage.

Pakkens indhold

Kontroller venligst, at alle komponenter er til stede og ubeskadigede:

• Lamp Base with Stem
• Glas Lampshade (UFO shape)
• White Spherical Globe
• E27 LED pære
• Power Cord with Inline Switch (attached to base)

Opsætning og montering

Follow these steps to assemble your Space Age Table Lamp:

Billedbeskrivelse: This image displays a four-step assembly guide for the lamp. Step 1 shows a hand securing the lamp body to its base by turning it clockwise. Step 2 illustrates placing the amber glass lampshade onto the secured lamp body. Step 3 depicts installing the E27 LED light bulb into the socket within the lampshade. Step 4 shows a hand tightening the white spherical globe into the lampshade until it is stable.

1. Step 1: Secure the Lamp Legeme
   Place the metal base on a stable, flat surface. Secure the lamp body (the central stem with the bulb socket) by turning it clockwise into the base until it is firmly attached.
2. Trin 2: Placer Lampskygge på Lamp Legeme
   Placer forsigtigt glasset lampshade (the amber, UFO-shaped component) onto the secured lamp body, ensuring it sits evenly.
3. Trin 3: Installer pære
   Screw the provided E27 LED light bulb into the socket located inside the lampshade. Turn clockwise until snug, but do not overtighten.
4. Step 4: Tighten Globe
   Place the white spherical globe over the installed bulb and into the lampshade opening. Turn it clockwise until it is stable and securely seated within the lampskygge.

Betjeningsvejledning

1. Tilslut til strøm: Sæt netledningen i en almindelig stikkontakt.
2. Tænd/sluk: Find den indbyggede kontakt på netledningen. Tryk på kontakten for at tænde for strømmen.amp ON eller OFF.
3. Lyseffekt: Når den er tændt, er lamp will produce a soft gradient effect, transitioning from warm amber to yellowish-orange through the glass lampskygge.

Billedbeskrivelse: This image shows the Generic Space Age Table Lamp fully assembled and illuminated, casting a warm, soft gradient light. The amber glass shade glows with a yellowish-orange hue, demonstrating the lamp's operational light effect.

Opretholdelse

• Rensning: Afbryd lamp from the power supply before cleaning. Wipe the metal base and glass components with a soft, dry, or slightly damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Udskiftning af pære: Sørg for at lamp is unplugged and cool before attempting to replace the bulb. Unscrew the spherical globe, then unscrew the old E27 bulb and replace it with a new E27 LED bulb. Reattach the globe.

Fejlfinding

Specifikationer

Garanti og support

For warranty information or technical support, please refer to the retailer's policy or contact the seller directly. Keep your purchase receipt for any warranty claims.