Indledning
This manual provides essential instructions for the safe installation, operation, and maintenance of your EGLO Salvilanas Integrated LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
The EGLO Salvilanas light features an integrated LED, a black finish, and a white diffuser, designed for indoor use in various rooms such as kitchens, dining rooms, bedrooms, and hallways. It can be mounted on ceilings or walls.
Sikkerhedsoplysninger
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved afbryderen eller sikringsboksen før installation eller service.
- Alle ledningsforbindelser skal være i overensstemmelse med lokale og nationale elektriske forskrifter. Hvis du ikke er bekendt med korrekt elektrisk ledningsføring, skal du kontakte en kvalificeret elektriker.
- Do not install this fixture in wet locations. It is designed for indoor use only and is not water resistant.
- Sørg for, at monteringsfladen kan bære armaturets vægt.
- Do not attempt to modify the integrated LED components.
- Hold emballagemateriale væk fra børn.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- EGLO Salvilanas Integrated LED Ceiling Light fixture (1)
- White plastic diffuser (1)
- Mounting hardware kit (screws, wire nuts, etc.) (1 set)
- Instruktionsmanual (1)
Opsætning og installation
This fixture is designed for semi-flush mount installation on ceilings or walls.
1. Forberedelse
- Sluk for strømmen ved hovedafbryderen eller sikringsskabet.
- Carefully unpack the fixture and its components. Keep all parts organized.
- Identify the mounting location. Ensure it is a dry, indoor area and the electrical box is securely mounted.
2. Montering af armaturet
Refer to the diagram below for general mounting steps. Specific hardware may vary.
Image: The EGLO Salvilanas Integrated LED Ceiling Light, demonstrating its sleek design suitable for ceiling or wall mounting.
- Attach the mounting bracket (if separate) to the electrical junction box using the provided screws.
- Tilslut de elektriske ledninger:
- Tilslut den sorte ledning fra armaturet til den sorte (strømførende) ledning fra samledåsen.
- Tilslut den hvide ledning fra armaturet til den hvide (neutrale) ledning fra samledåsen.
- Tilslut jordledningen fra armaturet til jordledningen fra samledåsen.
- Fastgør alle forbindelser med ledningsmøtrikker og elektrisk tape.
- Stik forsigtigt alle ledninger ind i samledåsen.
- Align the fixture with the mounting bracket and secure it using the provided screws or twist-lock mechanism.
- Install the white plastic diffuser onto the fixture according to its design (e.g., twist-lock, clips).
3. Sidste trin
- Gendan strømmen ved afbryderen.
- Test lysarmaturet.
Betjeningsvejledning
The EGLO Salvilanas LED Ceiling Light is designed for easy operation.
- Tænd/sluk: The light can be controlled via a wall switch connected to the fixture's power supply.
- Kontrolmetoder: This fixture supports control via a remote control and a compatible app. Refer to the separate instructions provided with your remote control or app for pairing and advanced features.
- Lys farve: The integrated LED provides a warm white light.
Opretholdelse
To ensure the longevity and appearance of your EGLO Salvilanas LED Ceiling Light, follow these simple maintenance guidelines:
- Rensning: Afbryd strømmen før rengøring. Brug en blød, tør eller let fugtet klud.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
- LED Components: The integrated LED light source is designed for long-term use and is not user-replaceable. Do not attempt to open or service the LED module.
- Diffuserpleje: Handle the white plastic diffuser with care to avoid scratches or damage.
Fejlfinding
If you experience issues with your light fixture, try the following solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet. Løs ledningsforbindelse. Defekt vægafbryder. |
Tjek afbryderen. Kontroller, at alle ledningsforbindelser er sikre (med strømmen slukket). Test vægkontakten, eller udskift den om nødvendigt. |
| Lyse flimrer. | Løse ledninger. Inkompatibel lysdæmper (hvis relevant). |
Kontroller ledningsforbindelserne (med strømmen afbrudt). Ensure any dimmer switch is LED-compatible. |
| Fjernbetjening/app virker ikke. | Batterier døde. Ikke parret korrekt. Signalinterferens. |
Udskift fjernbetjeningens batterier. Refer to remote/app instructions for pairing. Ensure no obstructions or strong interference sources. |
Hvis disse trin ikke løser problemet, skal du kontakte kundesupport.
Specifikationer
| Mærke: | Eglo |
| Modelnummer: | 206019A |
| Lyskilde: | Integreret LED |
| Wattage: | 21 watt |
| Lysstyrke: | 2850 lumen |
| Effektivitet: | 135.71 lumen/watt |
| Lys farve: | Varm hvid |
| Voltage: | 12 volt (DC) |
| Materiale: | Alloy Steel, Metal (fixture), Plastic (shade) |
| Slutte: | Black (fixture), White (diffuser) |
| Dimensioner (L x B x H): | 30.32 cm x 8 cm x 1.5 cm |
| Varens vægt: | 5 pund |
| Installationstype: | Semi Flush Mount |
| Kontrolmetode: | App, fjernbetjening |
| Indendørs/udendørs brug: | Indendørs |
| Vandmodstandsniveau: | Ikke vandafvisende |
Garanti
This EGLO product is covered by a 1 års producentgaranti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader som følge af forkert installation, ulykker, misbrug, misbrug eller uautoriserede ændringer. Gem venligst din købsbevis i tilfælde af garantikrav.
Støtte
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official EGLO website. When contacting support, please have your model number (206019A) and proof of purchase readily available.