Dorman 921-226

Dorman 921-226 Motoroliemålepind Brugermanual

Model: 921-226 | Mærke: Dorman

1. Produktet er slutview

This Dorman 921-226 engine oil dipstick is engineered to provide a precise fit and reliable function, mirroring the original equipment dipstick in specific vehicle applications. It features clearly marked and accurately gauged level indicators for proper oil measurement.

Nøglefunktioner omfatter:

  • Ideal replacement: Designed to match the fit and function of an original equipment dipstick.
  • Accurate measurement: Level marks are clearly distinguished and properly gauged for accuracy.
  • Holdbar konstruktion: Manufactured to strict specifications for reliable performance.
  • Kvalitetssikring: Backed by a team of product experts with extensive automotive experience.
  • Køretøjskompatibilitet: Compatible with Ford Escape (2005-2008) and Mercury Mariner (2005-2008).
Dorman 921-226 Engine Oil Dipstick, full length view
Figur 1.1: Fuld view of the Dorman 921-226 Engine Oil Dipstick, showing the yellow handle and the metal shaft with measurement markings.

2. Sikkerhedsoplysninger

ADVARSEL: Dette produkt kan udsætte dig for kemikalier, herunder bly, som er kendt af staten Californien for at forårsage kræft og fødselsdefekter eller anden reproduktionsskade. For mere information gå til www.P65Warnings.ca.gov.

Always ensure the engine is cool before checking or adding oil to prevent burns. Use appropriate personal protective equipment, such as gloves and eye protection, when working on vehicle engines.

3. Pakkens indhold

The Dorman 921-226 Engine Oil Dipstick package includes:

  • 1 x Dorman 921-226 Engine Oil Dipstick

4. Installationsvejledning

This dipstick is designed as a direct replacement for the original equipment part. Installation typically involves inserting the dipstick into the designated dipstick tube on the engine.

  1. Find oliepindsrøret: Identify the engine oil dipstick tube on your vehicle's engine. It is usually marked with an oil can symbol or a yellow/orange handle.
  2. Fjern den gamle oliepind (hvis relevant): If replacing an existing dipstick, firmly pull the old dipstick out of the tube.
  3. Isæt ny oliepind: Carefully insert the Dorman 921-226 dipstick into the dipstick tube. Ensure it is fully seated until the handle rests securely against the top of the tube. Do not force it.
Close-up of the yellow handle of the Dorman 921-226 Engine Oil Dipstick
Figur 4.1: Nærbillede view of the dipstick handle, which should be fully seated in the dipstick tube.

Note: Always refer to your vehicle's specific service manual for detailed instructions on dipstick replacement and oil level checking procedures.

5. Operating Instructions: Checking Engine Oil Level

Regularly checking your engine oil level is crucial for vehicle maintenance. Use the Dorman 921-226 dipstick to accurately monitor your oil.

  1. Parker på plant terræn: Sørg for, at dit køretøj er parkeret på en flad, jævn overflade for at få en nøjagtig aflæsning.
  2. Motortemperatur: For most accurate readings, check the oil when the engine is cool, or at least 5-10 minutes after the engine has been turned off to allow oil to drain back into the oil pan.
  3. Locate and Remove Dipstick: Træk oliepinden helt ud af røret.
  4. Rengøring: Brug en ren, fnugfri klud eller et papirhåndklæde til at tørre al olie af oliepinden.
  5. Sæt oliepinden i igen: Fully reinsert the dipstick into its tube until the handle is seated.
  6. Remove and Read: Pull the dipstick out again and observe the oil level. The oil should be between the "ADD" (or MIN) and "FULL" (or MAX) marks on the dipstick.
Close-up of the measurement end of the Dorman 921-226 Engine Oil Dipstick, showing oil level markings
Figure 5.1: The measurement end of the dipstick, showing the "ADD" and "FULL" markings for accurate oil level assessment.

If the oil level is below the "ADD" mark, add the recommended type and amount of engine oil as specified in your vehicle's owner's manual. Do not overfill.

6. Vedligeholdelse

The Dorman 921-226 Engine Oil Dipstick requires minimal maintenance. Periodically inspect the dipstick for any signs of damage, bending, or corrosion. Ensure the rubber O-ring on the handle (if present) is intact and provides a good seal to prevent contaminants from entering the engine.

Clean the dipstick with a clean, lint-free cloth before each use to ensure accurate readings. Avoid using abrasive materials or harsh chemicals that could damage the dipstick's surface or markings.

7. Fejlfinding

ProblemMulig årsagLøsning
Inaccurate Oil ReadingVehicle not on level ground; engine not cooled sufficiently; dipstick not fully inserted/removed; old oil residue on dipstick.Ensure vehicle is level. Allow engine to cool for 5-10 minutes. Fully insert and remove dipstick. Wipe dipstick clean before reading.
Dipstick Difficult to Insert/RemoveBent dipstick; debris in dipstick tube; incorrect dipstick for vehicle.Inspect dipstick for bends. Check dipstick tube for obstructions. Verify the dipstick is the correct model for your vehicle (Dorman 921-226).
Oil Leaking from Dipstick TubeDamaged O-ring on dipstick handle; dipstick not fully seated; excessive crankcase pressure.Inspect and replace O-ring if damaged. Ensure dipstick is fully seated. Consult a mechanic if excessive crankcase pressure is suspected.

8. Specifikationer

AttributVærdi
MærkeDorman
Modelnummer921-226
MaterialeMetal
Varedimensioner (L x B x H)0.7 x 2.75 x 29.52 tommer
Varens vægt1.12 ounce
Målenøjagtighed±0.25 tommer
UPC889245323712
OprindelseslandKina
Kompatible køretøjerFord Escape (2005-2008), Mercury Mariner (2005-2008)

9. Garanti og support

For information regarding warranty coverage, product support, or technical assistance, please contact Dorman Products directly or visit their official webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Dorman Products Official Webwebsted: www.dormanproducts.com

© 2024 Dorman-produkter. Alle rettigheder forbeholdes.

This manual is for informational purposes only. Always consult a qualified mechanic for complex repairs or if you are unsure about any procedure.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.