SHARP AQUOS Sound Partner Bluetooth Halshøjttaler AN-SX8 Brugermanual

1. Introduktion

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Produktet er slutview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

Figur 1: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Opsætning

3.1 Opladning af enheden

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Tænd/sluk

• To power on: Press and hold the Power button for approximately 3 seconds until the indicator light flashes.
• To power off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.

3.3 Indledende Bluetooth-parring

1. Ensure the AN-SX8 is powered off.
2. Tryk på tænd/sluk-knappen og hold den nede i cirka 5-7 sekunder, indtil indikatorlampen blinker hurtigt, hvilket angiver parringstilstand.
3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
4. Select "AN-SX8" from the list of found devices.
5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Betjeningsvejledning

4.1 Bluetooth-forbindelse

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 AUX-forbindelse

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Lydstyrkekontrol

• Tryk på Lydstyrke op (+) knappen for at øge lydstyrken.
• Tryk på Skrue ned (-) knappen for at sænke lydstyrken.

4.4 Afspilningskontrol (Bluetooth-tilstand)

• Tryk på Afspil/pause knappen én gang for at afspille eller sætte lyd på pause.
• Dobbelttryk på Afspil/pause knappen for at springe til næste spor.
• Tryk tredobbelt på Afspil/pause knappen for at gå til det forrige spor.

4.5 Opkaldshåndtering (Bluetooth-tilstand)

• Tryk på Afspil/pause knappen én gang for at besvare et indgående opkald.
• Tryk på Afspil/pause én gang under et opkald for at afslutte det.
• Tryk og hold på Afspil/pause knappen i 2 sekunder for at afvise et indgående opkald.

5. Vedligeholdelse

5.1 Rengøring

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Opbevaring

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Pleje af batterier

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Fejlfinding

• Ingen strøm: Sørg for, at enheden er fuldt opladet. Tilslut den til en strømkilde, og kontroller opladningsindikatoren.
• Ingen lyd:
  • Check the volume level on both the AN-SX8 and your connected device.
  • Ensure the device is correctly paired via Bluetooth or the AUX cable is securely connected.
  • Hvis du bruger Bluetooth, så prøv at afbryde forbindelsen og parre enheden igen.
• Problemer med Bluetooth-forbindelse:
  • Ensure the AN-SX8 is in pairing mode or discoverable.
  • Move the AN-SX8 closer to your Bluetooth device.
  • Slå Bluetooth fra og til på din kildeenhed.
  • Clear the AN-SX8 from your device's Bluetooth list and re-pair.
• Forvrænget lyd:
  • Reduce the volume on both the AN-SX8 and your connected device.
  • Ensure there are no obstructions or interference between the AN-SX8 and your Bluetooth device.
  • Tjek lydkilden for kvalitetsproblemer.

7. Specifikationer

8. Sikkerhedsoplysninger

• Udsæt ikke enheden for vand, fugt eller ekstreme temperaturer.
• Undgå langvarig lytning ved høj lydstyrke for at forhindre høreskader.
• Forsøg ikke at adskille, reparere eller modificere enheden.
• Opbevares utilgængeligt for børn og kæledyr.
• Dispose of the device and its battery responsibly according to local environmental regulations.

9. Garanti og support

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

For yderligere hjælp, besøg venligst SHARP Support Webwebsted (eksamp(linket, det faktiske link kan variere).