Nexel Chrome Wire Shelving Unit

1. Produktet er slutview

The Nexel Chrome Wire Shelving Unit is designed for efficient storage, offering durability and versatility. Its open wire construction allows for optimal air and light penetration, minimizing dust accumulation and facilitating sprinkler system operation. The shelves are easily adjustable without the need for tools, aligning precisely on numbered posts at 1-inch increments, ensuring customizable storage solutions. This unit meets NSF standards for quality and safety.

Figure 1.1: The Nexel Chrome Wire Shelving Unit, showcasing its four adjustable shelves and chrome finish.

2. Sikkerhedsoplysninger

• Saml altid enheden på en plan, stabil overflade for at forhindre, at den vælter.
• Do not exceed the maximum weight capacity per shelf or for the entire unit. Refer to specifications for details.
• Fordel vægten jævnt på tværs af hylderne for at opretholde stabilitet.
• Ensure all components are securely fastened before loading the shelves.
• Hold små børn og kæledyr væk under montering.
• Kontrollér jævnligt enheden for stabilitet, og spænd eventuelle løse forbindelser.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før monteringen påbegyndes:

• 4 x Chrome Posts with Leveling Feet
• 4 x trådhylder
• 16 x Snap-on Sleeves (4 per shelf)

Note: For Add-On Shelving Units, the package includes 2 posts, 4 shelves, snap-on sleeves, and 8 S-hooks for joining units.

4. Opsætning og montering

Assembly of the Nexel Chrome Wire Shelving Unit is designed to be straightforward and tool-free.

1. Monter nivelleringsfødder: Screw the leveling feet into the bottom of each post. Ensure they are securely tightened.
2. Install Snap-on Sleeves: Locate the desired height for your first (bottom) shelf on the numbered posts. Each post has numbered grooves at 1-inch increments. Snap two halves of a sleeve together around the post at the desired groove. Repeat for all four posts at the same height.

Figure 4.1: Snap-on sleeves are used to secure shelves to the posts.
3. Placer første hylde: Carefully lower a wire shelf over the four posts, ensuring that the corners of the shelf slide down over the snap-on sleeves. The shelf should rest firmly on the sleeves.


Figure 4.2: Posts are numbered for precise shelf height adjustment.

4. Installer resterende hylder: Repeat step 2 and 3 for the remaining three shelves, positioning them at your desired heights.


Figure 4.3: Shelves can be easily adjusted by repositioning the snap-on sleeves.

5. Niveller enheden: Once all shelves are in place, adjust the leveling feet at the bottom of each post to ensure the unit is stable and level on your floor.

Figure 4.4: Leveling feet ensure stability on uneven surfaces.

5. Betjening og brug

The Nexel Chrome Wire Shelving Unit is designed for versatile storage in various environments, including garages, kitchens, offices, and retail spaces.

• Hyldejustering: To adjust shelf height, simply remove items from the shelf, lift the shelf off the sleeves, remove the sleeves, reposition them at the desired numbered groove on the posts, and then re-seat the shelf.
• Indlæser: Place heavier items on lower shelves for increased stability. Distribute weight evenly across the shelf surface.
• Udvidelse: If you have an Add-On Shelving Unit, use the included S-hooks to securely connect it to an existing starter unit, maximizing your storage space.

Figure 5.1: The shelving unit can accommodate various storage containers and items.

Figur 5.2: Eksample of the shelving unit used for organizing supplies.

6. Vedligeholdelse

To ensure the longevity and optimal performance of your Nexel Chrome Wire Shelving Unit, follow these simple maintenance guidelines:

• Rensning: Tør kromoverfladerne af med en blød,amp cloth. For stubborn dirt, use a mild soap solution and dry thoroughly immediately to prevent water spots or corrosion. Avoid abrasive cleaners or scouring pads.
• Inspektion: Periodically inspect the unit for any signs of wear, damage, or loose connections. Ensure all snap-on sleeves are securely in place.
• Stabilitetstjek: Regularly check the unit's stability. If it wobbles, re-adjust the leveling feet until it is firm.
• Miljø: While chrome is durable, prolonged exposure to high humidity or corrosive environments may affect its finish. Store in a dry environment if possible.

7. Fejlfinding

If you encounter issues with your shelving unit, consider the following:

• Enheden er vaklende:
  • Sørg for, at enheden står på en flad, plan overflade.
  • Adjust the leveling feet at the base of each post until the unit is stable.
  • Verify that all shelves are properly seated on their snap-on sleeves and that sleeves are fully closed around the posts.
• Vanskeligheder med at justere hylder:
  • Ensure the shelf is empty before attempting to lift it.
  • Make sure the snap-on sleeves are fully separated before attempting to remove them from the post.
• Manglende dele:
  • Carefully check all packaging materials. If parts are still missing, contact Nexel customer support.

8. Specifikationer

9. Garanti og support

For warranty information or technical support regarding your Nexel Chrome Wire Shelving Unit, please contact Nexel directly. Details are typically available on the manufacturer's official webhjemmeside eller gennem den forhandler, hvor produktet blev købt.

Fabrikant: Nexel

For yderligere hjælp, besøg Nexel Store on Amazon.