MANHATTAN Ultra Slim Rigid TV Wall Mount (Model 461917) Instruction Manual

1. Introduktion

This manual provides detailed instructions for the safe and proper installation and use of your MANHATTAN Ultra Slim Rigid TV Wall Mount, Model 461917. This fixed wall mount is designed to securely hold large flat and curved screen televisions ranging from 60 to 120 inches, with a maximum load capacity of 120 kg (264 lbs). Please read all instructions carefully before installation to ensure optimal performance and safety.

2. Sikkerhedsoplysninger

• Vægt kapacitet: Do not exceed the maximum load capacity of 120 kg (264 lbs). Exceeding this limit may result in serious injury or property damage.
• Skærmstørrelse: This mount is suitable for TVs between 60 and 120 inches.
• Vægstruktur: Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. Wood studs, solid concrete, or concrete block walls are recommended. Do not install on drywall alone.
• Professionel installation: Hvis du er usikker på installationsprocessen eller din vægs egnethed, bør du kontakte en kvalificeret professionel installatør.
• Værktøjer: Brug passende værktøj til installationen. Brug altid sikkerhedsbriller.
• Børn: Hold børn væk fra installationsområdet.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, før installationen påbegyndes.

• Vægplade (1)
• Tv-beslag (2)
• Hardware-sæt (skruer, skiver, afstandsstykker, ankre)
• Clip-on Spirit Level (1)

Figur 1: Overview of the MANHATTAN Ultra Slim Rigid TV Wall Mount components, including the wall plate and two TV brackets.

4. Specifikationer

Figure 2: Illustration of VESA compatibility, showing the range from 50x50 to 900x600.

Figure 3: Detailed technical drawing displaying the dimensions of the wall mount.

5. Opsætning og installation

5.1. Nødvendigt værktøj (medfølger ikke)

• Blyant
• Bore
• Stud Finder
• Målebånd
• Topnøgle eller justerbar nøgle
• Phillips hovedskruetrækker

5.2. Attaching TV Brackets to the TV

1. Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at forhindre, at skærmen beskadiges.
2. Identificer VESA-monteringshullerne på bagsiden af ​​dit tv.
3. Vælg de passende skruer, skiver og afstandsstykker fra hardwaresættet, der passer til dit tv's VESA-mønster.
4. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are centered and securely fastened. The pull straps should hang freely below the TV.

Figur 4: Nærbillede view of the quick-release spring lock mechanism on the TV bracket, designed for easy installation and removal.

5.3. Mounting the Wall Plate to the Wall

1. Determine the desired height for your TV. Mark the center point on the wall.
2. Use a stud finder to locate at least two adjacent wood studs. Mark their centers. For concrete walls, ensure you use appropriate concrete anchors (included).
3. Position the wall plate against the wall, aligning its mounting holes with the marked stud centers. Use the included clip-on spirit level to ensure the wall plate is perfectly horizontal.
4. Mark the drilling points through the wall plate holes.
5. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the chosen lag bolts/anchors.
6. Fastgør vægpladen til væggen med de medfølgende trækbolte og skiver. Spænd alle bolte godt fast, men overspænd dem ikke.

Figure 5: The included clip-on spirit level helps ensure precise horizontal alignment during wall plate installation.

5.4. Hanging the TV

1. With assistance, carefully lift the TV (with brackets attached) and align the TV brackets with the wall plate.
2. Hægt TV-beslagene fast på vægpladens øverste kant.
3. Gently lower the TV until the quick-release spring locks engage, securing the TV to the wall plate. You should hear an audible click.
4. Pull the release straps to ensure the locks are engaged and the TV is securely mounted.

Figur 6: Et example of a television securely mounted to the wall using the MANHATTAN Ultra Slim Rigid TV Wall Mount.

6. Betjening

Once installed, the MANHATTAN Ultra Slim Rigid TV Wall Mount provides a fixed, low-profile position for your television. To remove the TV from the wall mount:

1. Locate the pull straps hanging below the TV.
2. Pull both straps downwards simultaneously to disengage the quick-release spring locks.
3. With assistance, carefully lift the TV off the wall plate.

7. Vedligeholdelse

• Rensning: Tør holderen af ​​med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Periodisk kontrol: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de forbliver stramme og sikre.
• Skade: Hvis nogen del af monteringen ser beskadiget eller slidt ud, må den ikke anvendes. Kontakt kundesupport for at få hjælp.

8. Fejlfinding

• TV'et er ikke i vater: Ensure the wall plate was installed horizontally using the spirit level. If not, remove the TV, adjust the wall plate, and re-mount.
• TV Not Engaging Locks: Ensure the TV brackets are correctly aligned with the wall plate and that no cables are obstructing the locking mechanism. Pull the straps to confirm engagement.
• Mount føles ustabil: Immediately remove the TV. Re-check all wall plate fasteners and ensure they are securely anchored into studs or appropriate concrete. Do not re-mount the TV until stability is confirmed.

9. Garanti og support

This MANHATTAN product is covered by a Manufacturer Guarantee. For specific warranty terms, conditions, and duration, please refer to the documentation included with your purchase or visit the official MANHATTAN website. For technical support or assistance with installation, please contact MANHATTAN customer service.

MANHATTAN Customer Support: Please refer to your product packaging or the MANHATTAN webhjemmeside for aktuelle kontaktoplysninger.