Alfred DB2S Smart RFID Deadbolt Lock User Manual

1. Introduktion

The Alfred DB2S Smart RFID Deadbolt Lock offers advanced security and convenient access for your home. This lock features multiple entry methods including PIN code, RFID card, traditional key override, and control via the Alfred Home App. Designed for ease of use and installation, it integrates modern technology to enhance your home security experience.

2. Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt før installation og brug.
• Forsøg ikke at skille låsen ad eller ændre den. Dette kan ugyldiggøre garantien og kompromittere sikkerheden.
• Keep traditional keys in a safe, accessible location outside the home for emergency access.
• Ensure all PIN codes and fingerprints are securely managed and not shared with unauthorized individuals.
• Regularly check battery levels and replace/recharge as indicated to prevent unexpected lockouts.

3. Opsætning og installation

The Alfred DB2S is designed for DIY-friendly installation. A fully digital installation process is available via the BILT app for step-by-step guidance.

3.1. Pakkens indhold

Sørg for, at alle komponenter er til stede, før installationen påbegyndes:

• Exterior Assembly (Touchscreen Keypad)
• Interior Assembly (Thumb Turn & Battery Compartment)
• Låsebolte
• Monteringsplade
• Slagplade
• Mekaniske nøgler (2)
• RFID Tags (2)
• Genopladelig Lithium-Ion batteripakke
• Installation Hardware (Screws, etc.)
• Brugervejledning (dette dokument)

3.2. Dørforberedelse

Verify your door dimensions meet the requirements for installation. The lock is compatible with standard door preparations.

3.3. Installing the Latch Bolt

Insert the latch bolt into the door edge. Ensure the latch bolt face is flush with the door edge and the slotted hole is centered. Secure it with the provided screws.

3.4. Installing Exterior and Interior Assemblies

Route the cable from the exterior assembly through the door hole and connect it to the interior assembly. Secure both assemblies to the door using the mounting plate and screws. Ensure the tailpiece is horizontal and the thumb turn is vertical for proper operation.

Billede: The exterior keypad assembly and the interior thumb turn assembly of the Alfred DB2S Smart RFID Deadbolt Lock.

3.5. Batteriinstallation og aktivering

Install the rechargeable lithium-ion battery pack into the interior assembly. The lock will activate upon battery insertion. Follow the instructions in the Alfred Home App to complete the initial setup and calibration.

4. Betjening af låsen

4.1. Oplåsningsmetoder

• PIN-kode: Enter your programmed PIN code on the illuminated touchscreen keypad.
• RFID-kort: Present a registered RFID card to the built-in RFID reader.
• Nøgletilsidesættelse: Brug den traditionelle mekaniske nøgle som backup.
• Alfred Home App: Use the Bluetooth connection on your mobile device via the Alfred Home App to unlock.
• Remote Unlock (with Alfred Connect WIFI bridge, sold separately): Control your lock remotely via the Alfred Home App.

4.2. Låsemetoder

• Manuel lås: Drej tommelfingeren på den indvendige samling.
• Lås med et enkelt tryk: Press and hold any key on the touchscreen for 2 seconds, or press the checkmark button once without entering a code.
• Automatisk genlås: The lock features an adjustable auto re-lock timer (30 sec, 1 min, 2 min, 3 min) which automatically locks the deadbolt after a set period.
• Alfred Home App: Use the Bluetooth connection on your mobile device via the Alfred Home App to lock.
• Remote Lock (with Alfred Connect WIFI bridge, sold separately): Control your lock remotely via the Alfred Home App.

4.3. Avancerede funktioner

• Door Position Sensors: These sensors detect when your door is physically open, preventing auto-locking if the door is not fully closed.
• Privatlivstilstand: Activate Privacy Mode from the interior to disable all external access methods except the master code and mechanical key.
• Ude-tilstand: When activated, an alarm will sound if the lock is accessed via mechanical key or thumb turn, and user PIN codes/fingerprints will be disabled. Only the master PIN code or app can disable Away Mode.
• Stemmestyring: With the Alfred Connect WIFI bridge (sold separately), the lock is compatible with Hey Google and Alexa for voice commands.

5. Vedligeholdelse

5.1. Batteristyring

The lock features a built-in low battery warning on both the touchscreen and within the Alfred Home App. When battery levels are low, recharge the lithium-ion battery pack. In case of complete battery failure, the lock can be temporarily powered via a USB-C port on the bottom of the outside panel for emergency access to change the battery pack.

Billede: The exterior keypad of the Alfred DB2S Smart Lock, showing the illuminated touchscreen and the discreet keyhole cover.

5.2. Rensning

Rengør berøringsskærmen og låsen med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen eller de elektroniske komponenter.

6. Fejlfinding

• Låsen svarer ikke: Check battery levels. Use the USB-C emergency power port if needed.
• Problemer med app-forbindelse: Ensure Bluetooth is enabled on your device. If using the Wi-Fi bridge, verify its connection and proximity to the lock.
• Keypad unresponsive in cold weather: Ensure the keypad is dry and free of ice. Repeated presses may be necessary in extreme cold.
• Automatisk låsning aktiveres ikke: Check door position sensors to ensure the door is fully closed and aligned.
• PIN code/RFID card not working: Verify the code/card is correctly programmed in the Alfred Home App.

7. Specifikationer

8. Garanti og support

8.1. Producentgaranti

The Alfred DB2S Smart RFID Deadbolt Lock is covered by a 1 års fabriksgaranti fra købsdatoen. Gem venligst din købsbevis i tilfælde af garantikrav.

8.2. Kundesupport

For further assistance, troubleshooting, or warranty inquiries, please refer to the Alfred Home App or visit the official Alfred webwebsted for supportressourcer.