Topaz LED 2' Linear Strip CCT Selectable Instruction Manual

Produkt overview

The Topaz 2-foot LED Linear Strip Luminaire is designed for versatile lighting applications in commercial facilities. This fixture features a 3-CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3500K, 4000K, and 5000K to achieve the desired lighting environment. Its design facilitates direct surface mounting and includes press-to-release buttons for tool-less access to the wiring compartment, simplifying installation in various settings such as healthcare facilities, offices, and retail locations. It is suitable for both new construction and remodeling projects.

Vigtige sikkerhedsinstruktioner

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle nationale og lokale el-forskrifter.
• Sørg for, at forsyningen voltage is compatible with the fixture's requirements (120-277V AC).
• Må ikke installeres i nærheden af ​​varmekilder eller i områder med for høj fugtighed.
• Håndter ikke den strømførende armatur med våde hænder.
• Denne lampe er kun beregnet til indendørs brug.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• LED Linear Strip Luminaire (1 unit)
• Monteringsudstyr (skruer, ankre)
• Instruktionsmanual (dette dokument)

Image: The Topaz LED 2' Linear Strip Luminaire shown with included mounting screws and a mounting plate. The fixture is white with a translucent diffuser, and wiring is visible at one end.

Installationsvejledning

Follow these steps for proper installation of your LED Linear Strip Luminaire.

Trin 1: Forbered dig til installation

1. Sluk for strømmen ved afbryderen eller sikringsskabet, før du starter.
2. Pak armaturet ud og kontroller det for eventuelle skader.
3. Identify the desired mounting location. Ensure the surface is suitable for supporting the fixture's weight.

Trin 2: Montering af armaturet

4. Position the fixture against the mounting surface and mark the locations for mounting screws.
5. Drill pilot holes if necessary, and insert wall anchors if mounting into drywall.
6. Secure the fixture to the mounting surface using the provided screws. Ensure it is firmly attached.

Trin 3: Ledningsforbindelser

7. Access the wiring compartment by pressing the release buttons on the fixture. This allows tool-less access.
8. Tilslut de elektriske ledninger:
   • Tilslut sort ledningen fra armaturet til live/hot wire from the supply.
   • Tilslut hvid ledningen fra armaturet til neutral wire from the supply.
   • Tilslut green/ground ledningen fra armaturet til jord wire from the supply.
9. Ensure all connections are secure using appropriate wire connectors.
10. Carefully tuck all wires into the wiring compartment and close the cover securely.

Step 4: CCT Selection (Before Final Power On)

Before restoring power, select your desired Correlated Color Temperature (CCT) using the integrated dip-switch. This switch is located on the fixture, typically near the wiring compartment.

Billede: Et nærbillede view of the CCT selectable switch on the side of the LED linear strip. The switch has three positions labeled 3500K, 4000K, and 5000K, allowing the user to choose the color temperature.

• 3500K: Varm hvid
• 4000K: Cool White / Neutral White
• 5000K: Dagslys

Slide the switch to your preferred CCT setting. Once set, restore power to the circuit.

Betjeningsvejledning

Once installed and powered, the Topaz LED Linear Strip Luminaire will operate according to the selected CCT setting. If you wish to change the CCT, you must first disconnect power to the fixture at the circuit breaker, then access the CCT selectable switch as described in Step 4 of the Installation Guide, adjust the setting, and finally restore power.

Opretholdelse

The Topaz LED Linear Strip Luminaire requires minimal maintenance.

• Rensning: Sørg for, at strømmen er slukket, inden rengøring. Brug en blød, tør eller let fugtet klud.amp klud til at tørre armaturets yderside af. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Lamp Udskiftning: The LED light source is integrated and not user-replaceable. The fixture is designed for a long operational life of 50,000 hours.

Fejlfinding

If you encounter issues with your LED Linear Strip Luminaire, refer to the following common problems and solutions:

Specifikationer

Garanti og support

This Topaz product is backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Topaz webwebsted.

For technical support, troubleshooting assistance, or warranty claims, please contact Topaz customer service. Keep your purchase receipt and model number (F-L2/20W/CTS/D-87) readily available when contacting support.

Note: Contact information for Topaz can typically be found on their official webwebsted eller produktemballage.