ESKY 150 EC Micro RC Helicopter Instruction Manual

Indledning

This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.

Hvad er der i æsken

Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.

• 1 x ESKY 150 EC Helikopter
• 1 x MINI 6X 6-Channel 2.4GHz Transmitter (Remote Control)
• 1 x 1S 3.7V 150mAh 20C Li-Po Battery (for helicopter)
• 2 x Hovedklinger (reserve)
• 1 x Haleblad (reserve)
• 1 x USB oplader
• 2 x skruetrækkere
• 1 x Brugermanual (dette dokument)

Image: All components included in the ESKY 150 EC package.

Produkt overview

Helikopterkomponenter

Billede: Side view of the ESKY 150 EC helicopter.

The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).

Fjernbetjening (sender)

The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:

Image: Labeled diagram of the MINI 6X Remote Control.

• Mode Switch: Changes flight modes (e.g., beginner/advanced).
• Power LED -indikator: Viser strømstatus.
• Gasspjældskontakt: Immediately cuts power to the motor.
• Rudder (Left/Right): Controls the helicopter's yaw.
• Gashåndtag (op/ned): Styrer hovedrotorens hastighed og højde.
• Aileron (Left/Right): Controls the helicopter's roll (side-to-side movement).
• Elevator (Up/Down): Controls the helicopter's pitch (forward/backward movement).
• Trim Controls (Throttle, Rudder, Aileron, Elevator): Fine-tune controls to correct unwanted drift.
• Afbryderen: Turns the remote control ON/OFF (hold down for ON/OFF).

Opsætning

1. Opladning af helikopterbatteriet

The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.

1. Tilslut USB-opladeren til en USB-strømkilde (f.eks. en computers USB-port eller en USB-vægadapter).
2. Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
3. The indicator light on the charger will show the charging status (refer to charger instructions for specific light patterns).
4. Når opladningen er færdig, skal batteriet frakobles opladeren. Overoplades ikke.

Image: Connecting the Li-Po battery to the USB charger.

2. Montering af helikopterbatteriet

Ensure the helicopter is powered off before installing the battery.

1. Gently remove the helicopter's canopy to access the battery compartment.
2. Insert the charged Li-Po battery into the compartment.
3. Connect the battery plug to the helicopter's power port.
4. Carefully reattach the canopy.

Image: Helicopter with canopy removed, revealing the battery compartment.

Image: Battery inserted into the helicopter.

3. Tænd og binding

The helicopter and remote control must be bound (paired) before flight.

1. Placer helikopteren på en flad, jævn overflade.
2. Ensure the remote control's throttle stick is in the lowest position.
3. Tænd for helikopterens strømafbryder. Helikopterens indikatorlampe vil blinke.
4. Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
5. Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
6. If binding fails, turn off both devices and repeat the process.

Betjeningsvejledning

Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.

Grundlæggende flyvekontrol

• Gashåndtag (venstre greb op/ned): Increases or decreases the main rotor speed, controlling ascent and descent.
• Ror (venstre pind venstre/højre): Controls the helicopter's rotation around its vertical axis (yaw).
• Elevator (højre pind op/ned): Controls forward and backward movement (pitch).
• Kænguror (højre pind venstre/højre): Controls side-to-side movement (roll).

Start og landing

1. Start: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
2. Landing: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.

Altitude Hold and Hover

The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.

Flight Modes (Hi/Lo)

The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.

One-Button Shutdown

In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.

Opretholdelse

Rensning

Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.

Udskiftning af knive

If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.

Billede: Detaljeret views of helicopter components, including rotor attachment points.

Batteripleje

• Brug altid den originale oplader.
• Undlad at overoplade eller overaflade batteriet.
• Opbevar batterier et køligt, tørt sted væk fra direkte sollys og varme.
• Hvis batteriet hæver eller viser tegn på skade, skal du straks stoppe med at bruge det og bortskaffe det korrekt.

Fejlfinding

Specifikationer

• Modelnummer: 150 EC
• Fabrikant: ESKY
• Kontrolsystem: 6-akse Gyroskop
• Funktioner: Height Hold, Hover, One-button Shutdown
• Helikopterbatteri: 1S 3.7V 150mAh Li-Po (included)
• Fjernbetjening: MINI 6X 6-Channel 2.4GHz Transmitter
• Anbefalet alder: 14 år og opefter
• Varens vægt: Cirka 1.05 pund (inklusive emballage)
• Pakkedimensioner: 8.3 x 7.1 x 3.8 tommer

Image: ESKY 150 EC Helicopter dimensions.

Sikkerhedsretningslinjer

Please read and adhere to these safety guidelines to prevent injury or damage.

• Always operate the helicopter in an open area, away from people, pets, and obstacles.
• Flyv ikke i nærheden af ​​​​elledninger, veje eller vandløb.
• Hold fingre og løstsiddende tøj væk fra roterende knive.
• Never fly in strong winds or adverse weather conditions.
• Voksenopsyn anbefales til brugere under 14 år.
• Do not attempt to modify the helicopter or its components.
• Sluk helikopteren og fjernbetjeningen, når de ikke er i brug.

Garanti og support

Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's webwebstedet for specifikke garantivilkår og supportmuligheder.

Officielle produktvideoer

No official product videos from the seller were provided in the product data.