VOCOO Magnetisk Digital Køkkenur Brugermanual (Model VC5268)

1. Introduktion

Thank you for choosing the VOCOO Magnetic Digital Kitchen Timer (Model VC5268). This versatile timer is designed for ease of use, featuring a large, bright display, adjustable sound and brightness, and multiple placement options. It is ideal for various activities including cooking, studying, fitness, and classroom management. This manual will guide you through the setup, operation, and maintenance of your new timer.

Figure 1: VOCOO Magnetic Digital Kitchen Timer (Model VC5268)

2. Opsætning

2.1 Batteriinstallation

Your VOCOO Digital Timer requires three (3) AAA batteries (included). To install or replace batteries:

1. Locate the kickstand on the back of the timer.
2. Flip up the kickstand.
3. Skub batterirummets dæksel op.
4. Indsæt tre AAA-batterier, og sørg for korrekt polaritet (+/-).
5. Close the battery compartment cover and fold the kickstand back into place if not in use.

A low power icon will appear on the display to remind you when batteries need to be changed.

Figur 2: Bagside view showing battery compartment and kickstand.

2.2 Placeringsmuligheder

The VOCOO timer offers versatile placement options:

• Magnetisk: The strong magnetic back with rubber pads allows you to attach the timer securely to metal surfaces like refrigerators, ovens, or whiteboards without scratching.
• Skrivebordsstativ: Utilize the sturdy, foldable kickstand for convenient placement on any flat surface, such as a countertop, desk, or table.
• Hængende: A small hanging hole is provided for hanging the timer on a hook.

Figur 3: Forskellige placeringsmetoder til timeren.

3. Betjeningsvejledning

The timer features intuitive buttons for easy operation:

Figur 4: Øverst view of the timer with clearly marked buttons.

• M (Minute) Button: Press to set minutes. Each press increases the minute count by one.
• S (Second) Button: Press to set seconds. Each press increases the second count by one.
• CLEAR -knap: Press to reset the timer to 00:00.
• SP/ST (Start/Pause) Button: Press to start or pause the timer.

3.1 Count Down Function

1. Tryk på M og S buttons to set your desired countdown time (up to 99 minutes and 59 seconds).
2. Tryk på SP/ST knappen for at starte nedtællingen.
3. For at sætte nedtællingen på pause, tryk på SP/ST en gang til. Trykke SP/ST at genoptage.
4. When the countdown reaches zero, the alarm will sound (if not muted) and the display will blink.
5. Tryk på KLAR button to stop the alarm and reset the timer.

Hukommelsesfunktion: The timer remembers the last set countdown time. If you press KLAR after an alarm, the display will return to the last set time, allowing for quick reuse.

3.2 Count Up Function (Stopwatch)

1. Ensure the timer is reset to 00:00 by pressing the KLAR knap.
2. Tryk på SP/ST button to start counting up from 00:00.
3. For at sætte optællingen på pause, tryk på SP/ST en gang til. Trykke SP/ST at genoptage.
4. For at nulstille stopuret skal du trykke på KLAR knap.

4. Funktioner

4.1 Stort display

The timer features a large 4-inch screen with 1.3-inch tall bright numbers, ensuring excellent visibility from a distance and various angles.

4.2 Lysstyrkeniveauer

A slide switch on the side of the timer allows you to select between two brightness modes:

• Lys tilstand: The display remains continuously bright while the timer is running.
• ØKO -tilstand: The display will dim after 5 seconds of inactivity to conserve battery life. It will brighten again when a button is pressed or the alarm sounds.

It is recommended to use ECO mode for extended battery life.

Figur 5: Side view illustrating brightness and volume control switches.

4.3 lydstyrkeniveauer

Another slide switch on the side controls the alarm volume:

• Højt: 80-90dB, suitable for noisy environments.
• Blød: 60-75dB, for quieter settings.
• Stum: The display will only blink when the timer reaches zero, with no audible alarm.

Note: When set to Loud or Soft, the timer will also beep when setting the time. Slide to Mute if silent operation is desired.

5. Vedligeholdelse

5.1 Udskiftning af batteri

Replace the three AAA batteries when the low power icon appears on the display to ensure optimal performance. Refer to Section 2.1 for detailed battery installation instructions.

5.2 Rengøring

Wipe the timer with a soft, dry cloth. Avoid using abrasive cleaners or submerging the device in water.

6. Fejlfinding

• Skærmen er svag eller slukket:
  • Kontroller batteriniveauet og udskift det om nødvendigt.
  • Ensure the brightness switch is not set to ECO mode if a continuously bright display is desired.
• Alarmen lyder ikke:
  • Check the volume switch on the side of the timer and ensure it is not set to Mute.
• Timeren reagerer ikke på tryk på knapper:
  • Ensure batteries are correctly installed and have sufficient power.
  • Tryk knapperne godt ned.

7. Specifikationer

Figur 6: Produktdimensioner.

8. Garanti og support

For any questions, concerns, or support needs regarding your VOCOO Magnetic Digital Kitchen Timer, please contact our customer support team.

E-mail: support@vocoo.vip.com

Please have your model number (VC5268) available when contacting support for faster service.