1. Introduktion
This manual provides essential information for the proper installation, operation, and maintenance of your Sonew Sound and Light Alarm Strobe Siren, Model Sonewog3gxt821e. Please read this manual thoroughly before installation and use to ensure safe and effective performance of the device. This device is designed to provide audible and visual alerts in emergency situations.
2. Sikkerhedsoplysninger
Vigtige sikkerhedsinstruktioner:
- Afbryd altid strømmen, før du installerer eller servicerer enheden.
- Installationen skal udføres af kvalificeret personale i overensstemmelse med alle lokale og nationale el-forskrifter.
- Sørg for, at strømforsyningen voltage matches the device's requirements (DC12V or DC24V).
- Udsæt ikke enheden for overdreven fugt eller ekstreme temperaturer.
- Do not paint over the strobe light or siren openings, as this may impair functionality.
3. Produktet er slutview
3.1. Funktioner
- Audible and visual alarm for effective alerts.
- Simple two-wire system for straightforward wiring.
- Compatible with DC12V or DC24V power supplies.
- Equipped with six LEDs for bright, enhanced visibility strobe flashes.
- Offers three different selectable tones.
3.2. komponenter
The Sonew Sound and Light Alarm Strobe Siren consists of a durable red casing, an integrated siren, and a clear lens covering six high-intensity LED strobe lights. The rear panel houses the wiring terminals for power connection.
Figur 1: Forside view of the Sonew Sound and Light Alarm Strobe Siren, showing the 'FIRE' label and LED strobe lights.
Figur 2: Foran og bagpå views of the alarm. The rear panel displays the wiring terminals for power input.
4. Specifikationer
4.1. Tekniske specifikationer
| Specifikation | Værdi |
|---|---|
| Mærke | Sonew |
| Modelnummer | Sonewog3gxt821e |
| Farve | Rød |
| Strømkilde | Elektrisk med ledning |
| Voltage | 12V / 24V DC |
| Hørbar støj | 105 decibel |
| Kontrolmetode | Røre ved (Refers to internal tone selection jumpers) |
| Monteringstype | Vægmontering |
| Produktmål (L x B x H) | 5.28" x 4.53" x 1.89" (133 mm x 115 mm x 48 mm) |
| Sensor Technology | Photoelectric Sensor (Internal component for alarm activation) |
Figure 3: Physical dimensions of the alarm unit.
5. Opsætning og installation
5.1. Montering
- Select a suitable wall location for mounting, ensuring clear visibility of the strobe light and unobstructed sound propagation.
- Use appropriate screws and anchors (not included) to securely fasten the alarm unit to the wall. The mounting holes are visible on the rear plate (refer to Figure 2).
5.2. Ledninger
The unit features a two-wire system for power connection. Ensure power is disconnected before proceeding with wiring.
- Identify the two main power cables from your DC12V or DC24V power supply.
- Connect the positive (+) wire from the power supply to the positive terminal on the alarm unit.
- Connect the negative (-) wire from the power supply to the negative terminal on the alarm unit.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede.
Note: The unit can be connected to either a 12V or 24V DC power source. Verify your power source matches the device's requirements.
5.3. Tonevalg
The alarm unit offers three different tones. These are typically selected via jumpers or switches located on the circuit board inside the unit (refer to Figure 2 for general location of internal components). Consult the specific markings on your device for detailed tone selection instructions.
6. Betjening
Once properly installed and powered, the Sonew Sound and Light Alarm Strobe Siren will activate upon receiving a trigger signal from a compatible alarm system (e.g., a fire alarm control panel). Upon activation, the unit will emit a loud audible siren (105 dB) and bright, flashing LED lights to alert occupants of an emergency.
Figure 4: The alarm provides effective alerts in commercial environments.
Figure 5: The alarm is suitable for diverse applications, from industrial to residential.
7. Vedligeholdelse
7.1. Rensning
Periodically clean the exterior of the alarm unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing eller linse.
7.2. Inspektion
Regularly inspect the unit for any signs of physical damage, loose wiring, or obstructions to the siren or strobe light. Ensure the mounting remains secure. Test the alarm functionality periodically as part of your overall safety system maintenance.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Alarmen aktiveres ikke | Ingen strømforsyning; Forkert ledningsføring; Defekt triggersignal. | Kontroller strømtilslutninger og volumentage; Verify wiring polarity; Test the trigger source. |
| Strobe light not flashing | LEDs damaged; Power issue. | Ensure proper power supply; If LEDs are damaged, unit may require replacement. |
| Sirenen lyder ikke | Siren component damaged; Power issue. | Ensure proper power supply; If siren is damaged, unit may require replacement. |
| Alarm sounds continuously or falsely | Faulty trigger signal; Wiring short. | Inspect trigger source and wiring for faults or shorts. |
9. Garanti og support
For garantioplysninger eller teknisk support henvises til produktemballagen eller kontakt din forhandler. Gem din købskvittering som købsbevis.