MCombo Small Power Lift Recliner Chair User Manual

1. Introduktion

Thank you for choosing the MCombo Small Power Lift Recliner Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read it thoroughly before use and retain it for future reference.

Image 1.1: The MCombo Small Power Lift Recliner Chair, featuring a coffee-colored fabric finish.

2. Sikkerhedsinstruktioner

For at sikre sikker drift og forhindre personskade eller beskadigelse, bedes du følge følgende retningslinjer:

• Vægtgrænse: Overskrid ikke den maksimale vægtkapacitet på 158 kg.
• Børn og kæledyr: Keep children and pets away from the chair's moving parts, especially during operation.
• Strømledning: Ensure the power cord is not pinched, tangled, or placed under the chair. Avoid placing heavy objects on the cord.
• Klarering: Maintain adequate clearance around the chair to prevent obstruction during reclining or lifting.
• Stabil overflade: Placer stolen på en flad, stabil overflade.
• Væsker: Undgå at spilde væsker på stolen, især i nærheden af ​​elektriske komponenter.
• Demontering: Forsøg ikke selv at skille stolen ad eller reparere den. Kontakt kundesupport for at få hjælp.
• Power Outage: I tilfælde af en magt outage while reclined, the chair cannot be manually returned to an upright position. Ensure a backup power source or carefully exit the chair if safe to do so.

3. Pakkens indhold

Your MCombo Power Lift Recliner Chair is shipped in two boxes. Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact MCombo customer support.

Image 3.1: The recliner chair components are shipped in two separate boxes, which may arrive on different days.

Inkluderede komponenter:

• Ryglæn
• Venstre armlæn
• Højre armlæn
• Base (Seat)
• Accessories Box (containing power adapter, remote controls, and small parts)
• Instruktionsmanual (dette dokument)

4. Monteringsvejledning

Assembly of your MCombo Power Lift Recliner Chair is designed to be straightforward and typically takes about 20 minutes with no tools required. It is recommended to have two people for easier handling of components.

Image 4.1: The main components of the recliner chair laid out for assembly.

Trin-for-trin samling:

1. Udpak komponenter: Carefully remove all parts from the boxes and lay them out on a clean, soft surface to prevent scratches.
2. Fastgør ryglæn: Align the metal brackets on the backrest with the corresponding slots on the seat base. Slide the backrest down firmly until it locks into place. Ensure a secure connection.
3. Fastgør armlæn: Slide each armrest onto the side rails of the seat base. Ensure they are fully seated and secure.
4. Tilslut ledninger: Locate the electrical cables extending from the backrest, armrests, and seat base. Connect all corresponding wires. There are typically two sets of white/red connectors for the massage/heat functions and a main power connector for the lift mechanism. Refer to the specific wiring diagram in the included accessory manual for detailed connections.
5. Tilslut strømadapter: Plug the power adapter into the chair's main power input, then plug the adapter into a wall outlet.
6. Test funktioner: Before final placement, test all functions (lift, recline, massage, heat) using the remote controls to ensure proper operation.

5. Betjening

5.1 Løfte- og tilbagelæningsfunktioner

The chair features a counter-balanced lift mechanism and a TUV certified actuator to assist with standing and reclining. Use the two-button remote control for these functions.

Image 5.1: The two-button remote for controlling the chair's lift and recline positions.

• At løfte: Tryk og hold på Pil op button. The chair will slowly tilt forward and lift, assisting you to a standing position.
• At læne sig tilbage: Tryk og hold på Pil ned button. The chair will recline backward and the footrest will extend. Release the button at your desired position. The chair offers 3 distinct reclining positions.
• For at vende tilbage til oprejst position: Tryk og hold på Pil op button until the chair returns to its fully upright position.

5.2 Massage- og varmefunktioner

The chair features 8 vibration nodes, 3 massage modes, 3 intensity levels, and a lumbar heating zone. These functions are controlled by a separate remote.

Image 5.2: The remote control for massage and heat functions, indicating various settings and body zones.

• Varme funktion: Tryk på VARME button to activate lumbar heating. Press again to turn off. The heating function operates independently of the vibration massage.
• Massagetilstande: Tryk på MODE button to cycle through 3 different massage patterns.
• Intensitetsniveauer: Brug INTENSITY + or INTENSITY - buttons to adjust the vibration strength (3 levels).
• Vibration Zones: Knapper mærket TILBAGE, LUMBAR, LÅR, og BEN allow you to select specific areas for vibration massage.
• Timer: Tryk på TIMER button to set an auto-off timer for 10, 20, or 30 minutes.

5.3 USB Charging Ports and Convenience Features

The chair is equipped with convenient features for enhanced user experience.

Image 5.3: Armrest features including USB ports, cup holders, and side pockets.

• USB -opladningsporte: Located on the side of the chair, these ports allow you to charge your electronic devices while relaxing.
• Kopholdere: Integrated cup holders on both armrests keep beverages within easy reach.
• Sidelommer: Convenient side pockets provide storage for remote controls, magazines, or other small items.
• Forlænget fodstøtte: The design includes an extended footrest to provide full, comfortable support for your legs and ankles when reclined.

Image 5.4: The extended footrest provides comprehensive leg support.

6. Pleje og vedligeholdelse

Korrekt pleje vil forlænge levetiden og udseendet af din lænestol.

• Rensning: Tør af med annonceamp klud. Tør straks spild op med en ren, tør klud. Undgå skrappe kemikalier eller slibende rengøringsmidler.
• Stofpleje: The chair uses OEKO-TEX Standard 100 certified fabric, ensuring it is free from harmful substances. Regular vacuuming with a soft brush attachment can help maintain the fabric.
• Inspektion: Periodically check all connections and fasteners to ensure they are tight.
• Strømledning: Undersøg regelmæssigt netledningen for tegn på skader. Hvis den er beskadiget, skal du ophøre med at bruge den og kontakte kundesupport.

Image 6.1: The chair's fabric is OEKO-TEX Standard 100 certified for safety and quality.

7. Fejlfinding

Hvis du støder på problemer med din lænestol, kan du se følgende almindelige problemer og løsninger:

If the problem persists after attempting these solutions, please contact MCombo customer support for further assistance.

8. Specifikationer

Detailed specifications for the MCombo Small Power Lift Recliner Chair.

Billede 8.1: Dimensionel overview of the recliner chair in various positions.

Image 8.2: The 6.3-inch thick seat cushion provides enhanced comfort and support.

9. Garanti og support

9.1 2-års begrænset garanti

Your MCombo Power Lift Recliner Chair is backed by a 2-year limited warranty from the date of purchase. This warranty covers free replacements for the following components:

• Læne-/løftemekanismer
• Elektriske systemer
• Polstring og hynder
• Træ-/metalrammekonstruktioner

Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, or unauthorized modifications.

9.2 Kundesupport

For any questions, concerns, or warranty claims, please contact MCombo customer support. You can find contact information on the MCombo official webwebsted eller via din købsplatform.

Online support: Besøg MCombo-butik på Amazon for produktinformation og supportressourcer.