Temank 80A Solar Charge Controller User Manual

1. Produktet er slutview

The Temank 80A Solar Charge Controller is designed to manage the power flow from your solar panels to your battery bank and DC loads. It features automatic system voltage detection (12V/24V/36V/48V), a clear LCD display, and dual USB outputs for charging small electronic devices. This controller utilizes 3-stage intelligent PWM technology for efficient and safe battery charging, extending battery life.

Figur 1: Forside view of the Temank 80A Solar Charge Controller, showing the LCD screen, control buttons, USB ports, and terminal connections.

2. Sikkerhedsinstruktioner

Please read all instructions carefully before installation and operation to ensure proper use and prevent damage or injury.

• Ensure all wiring is correctly polarized. Incorrect polarity can damage the controller and connected devices.
• Tilslut først batteriet, derefter solpanelet og til sidst belastningen. Frakobl i omvendt rækkefølge.
• Install the controller indoors, away from direct sunlight, high temperatures, and water.
• Ensure adequate ventilation around the controller for proper heat dissipation.
• Use appropriate wire gauges for all connections to prevent overheating and power loss. Refer to the specifications section for recommended wire sizes.
• Do not attempt to repair or modify the controller. Contact qualified personnel for service.
• The controller is equipped with multiple protections, including reverse connection, over-temperature, overvoltage, short-circuit, and overload protection. However, proper installation is crucial.

Figur 2: Overview of the controller's multiple protection features, including safeguards against reverse connection, over-temperature, overvoltage, short-circuit, and overload.

3. Opsætningsvejledning

3.1 Montering af controlleren

Mount the solar charge controller vertically on a wall or stable surface in a well-ventilated area. Ensure there is sufficient space around the unit for air circulation. Avoid mounting near flammable materials or in areas prone to moisture.

3.2 Ledningsforbindelser

Follow the wiring sequence carefully to prevent damage. Always connect the battery first, then the solar panels, and finally the DC load.

1. Tilslut batteriet: Tilslut batteriets positive og negative terminaler til de tilsvarende batteriterminaler på controlleren. Sørg for korrekt polaritet. Controlleren vil automatisk registrere systemets voluminiumsstyrke.tage.
2. Tilslut solpanelerne: Connect the positive and negative terminals of your solar panel array to the corresponding PV terminals on the controller. Ensure correct polarity.
3. Tilslut DC-belastningen: Connect the positive and negative terminals of your DC load to the corresponding load terminals on the controller.

Figure 3: Detailed wiring diagram illustrating the connection sequence for solar panels, battery, and DC loads to the charge controller.

Figure 4: Simplified 2-step connection guide, emphasizing the correct order of connecting components to the solar charge controller.

4. Betjeningsvejledning

4.1 LCD-skærm og knapper

The controller features an LCD display that shows real-time system status and parameters. Three buttons are used for navigation and setting adjustments:

• PV/A Button: Vant til view solar panel current and navigate menus.
• BAT/V Button: Vant til view batteri voltage and navigate menus.
• SET/O Button: Bruges til at gå ind i indstillingstilstand og bekræfte valg.

The display will automatically return to the default screen after 100 seconds of inactivity.

Figur 5: Detaljeret view of the LCD display, control buttons, USB ports, and the die-cast aluminum construction for heat dissipation.

4.2 Valg af batteritype

The controller is compatible with various 12V/24V/36V/48V battery types. It supports user-defined battery parameters and can calibrate battery voltage.

• Understøttede batterityper: Sealed, Flooded, Gel, LiFePO4, and Ternary Lithium batteries.
• To select the battery type, enter the settings menu using the SET/O button and navigate to the battery type option.

Figure 6: Visual representation of the controller's compatibility with different battery chemistries, including LiFePO4, Sealed Lead-acid, GEL, Flooded, and AGM.

4.3 Load Control and USB Output

The controller allows for adjustable load enable duration, combining solar light control and time control functions. It also features dual USB outputs (5V/2.5A max) for charging mobile phones, tablets, and other small USB-powered devices.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din solcelleladeregulator.

• Inspektion: Kontrollér regelmæssigt alle ledningsforbindelser for tæthed og korrosion.
• Rensning: Keep the controller clean and free from dust. Use a dry cloth to wipe the surface. Do not use liquid cleaners.
• Ventilation: Sørg for, at ventilationsåbningerne ikke er blokerede, så varmen kan afledes korrekt.
• Miljøforhold: Kontroller, at driftsmiljøet holder sig inden for de angivne temperatur- og fugtighedsområder.

6. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på med din solcelleladeregulator.

• Intet display/Ingen strøm:
  • Kontrollér batteriforbindelserne, og sørg for, at de er sikre og korrekt polariseret.
  • Bekræft batteri voltage er inden for regulatorens driftsområde.
• Batteri oplades ikke:
  • Kontroller solpanelets forbindelser og polaritet.
  • Sørg for, at solpanelerne får tilstrækkeligt med sollys.
  • Bekræft solpanelets afbrydelsesvolumentage (Voc) er inden for regulatorens maksimale indgangsvolumentage.
  • Check for any error codes on the LCD display and refer to the manual's error code section (if available in full manual).
• Indlæsning virker ikke:
  • Kontroller belastningstilslutninger og polaritet.
  • Ensure the battery has sufficient charge. The controller may disconnect the load if battery voltage er for lavt.
  • Check load settings on the controller (e.g., light control, time control).
  • Verify the load current does not exceed the controller's rated output current.
• Overophedning:
  • Ensure the controller is mounted in a well-ventilated area.
  • Check for obstructions around the heat sink.
  • Reduce load or solar input if consistently overheating in extreme conditions.

7. Specifikationer

Technical specifications for the Temank 80A Solar Charge Controller.

Figure 7: Key technical specifications for the 80A solar charge controller.

8. Garanti og support

For warranty information and technical support, please refer to the documentation included with your purchase or contact Temank customer service through their official channels. Keep your purchase receipt for warranty claims.