Indledning
This manual provides instructions for the setup, operation, and maintenance of your PDP REMATCH GLOW Wireless Controller for Nintendo Switch. This controller is designed to enhance your gaming experience with its wireless connectivity, extended battery life, and customizable features.
Front view of the PDP REMATCH GLOW Wireless Controller, showcasing the Super Mario Icon design in black and red.
Funktioner
- Trådløs forbindelse: Enjoy gaming with a 30-foot wireless range via Bluetooth.
- Genopladeligt batteri: Built-in battery provides up to 40 hours of play time on a single charge.
- Glow-in-the-Dark Design: Unique Super Mario Icon design glows in the dark after exposure to light.
- Dual Programmable Back Buttons: Customize your gameplay by assigning additional functions to the two back buttons for faster in-game actions.
- Ergonomisk design: Engineered for comfort during extended gaming sessions.
- Officielt licenseret: This product is officially licensed by Nintendo.
Videoshowasing the PDP REMATCH GLOW Wireless Controller's design and glow-in-the-dark feature.
Opsætning
1. Første opladning
Before first use, fully charge the controller. Connect the included USB-C cable to the charging port on the controller and the other end to a USB power source (e.g., Nintendo Switch dock, USB wall adapter). The LED indicators on the controller will show charging status.
The USB-C port for charging the controller.
2. Parring med Nintendo Switch
- Fra Nintendo Switch HOME-menuen skal du vælge Controllere, så Skift greb/rækkefølge.
- På controlleren skal du trykke på og holde Sync knap (located on the top edge, near the charging port) for at least 3 seconds. The player LEDs will begin to flash.
- Når de er parret, vil afspillerens LED (er), der svarer til controller-nummeret, forblive tændt.
Betjeningsvejledning
Grundlæggende kontrol
The controller features standard Nintendo Switch button layouts, including A, B, X, Y buttons, directional pad, left and right analog sticks, ZL/ZR and L/R shoulder buttons, and Home, Capture, Plus, and Minus buttons.
Detaljeret view of the controller's D-pad and action buttons.
Programmerbare tilbageknapper
The controller includes two programmable back buttons. These can be assigned to replicate other button functions for quick access during gameplay.
- Tryk og hold på Program knap (located on the back of the controller) until the LED indicator begins to flash.
- Press the button you wish to map (e.g., A, B, X, Y, L, R, ZL, ZR, etc.).
- Press the desired programmable back button (P1 or P2) to assign the function. The LED indicator will stop flashing, confirming the mapping.
- To clear a mapped button, press and hold the Program knap until the LED flashes, then press the programmable back button you wish to clear twice.
Bag view of the controller, highlighting the programmable back buttons.
Glow-in-the-Dark-funktion
The Super Mario Icon design on the controller will glow in the dark after being exposed to a light source. For optimal glow, expose the controller to bright light for several minutes.
The controller's design illuminated in a dark environment.
Opretholdelse
Rensning
To clean the controller, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the surface or internal components.
Opbevaring
Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the controller is fully charged to maintain battery health.
Fejlfinding
Controlleren opretter ikke forbindelse
- Sørg for, at controlleren er opladet.
- Verify the Nintendo Switch is updated to the latest system software.
- Attempt to re-pair the controller by following the "Pairing with Nintendo Switch" steps.
- If issues persist, try resetting the controller by inserting a small pin into the reset hole on the back of the controller.
Buttons or Analog Sticks Not Responding
- Check for any physical obstructions around the buttons or sticks.
- Ensure the controller is fully charged and properly connected/paired.
- Perform a controller calibration through the Nintendo Switch system settings (System Settings > Controllers and Sensors > Calibrate Control Sticks / Calibrate Gyroscope Controls).
Specifikationer
| Feature | Detalje |
|---|---|
| Kompatible enheder | Nintendo Switch |
| Controller type | Gamepad |
| Forbindelsesteknologi | Bluetooth |
| Yderligere funktioner | Ergonomic, Headphone Jack, Wireless |
| Knap Antal | 17 |
| Hardware platform | Spillekonsol |
| Strømkilde | Batteridrevet |
| Varens vægt | 0.42 gram |
| Pakkemængde | 1 |
| Emnedimensioner | 6.89 x 6.54 x 2.76 tommer |
| Modelnavn | Super Icon REMATCH GLOW |
| Farve | Rød/sort |
| GTIN / UPC | 708056071578 |
Garanti og support
Garantioplysninger
Performance Designed Products, LLC (“PDP”) warrants to the original consumer purchaser of the product that our product will be free from defects in materials and/or workmanship, depending on the product type, for a period of between ninety (90) days and five (5) years (and as may be further specified on the product’s packaging), beginning from the date of original purchase of the product. If a defect covered by this warranty occurs during this period, PDP at its option will repair or replace, at no charge, any part that PDP determines to be defective. A proof of purchase will be required to obtain warranty services; therefore a saved receipt will be necessary. If you have lost your receipt, most reputable retailers will be able to reissue a receipt for you.
Kundesupport
For further assistance or technical support, please refer to the official PDP webwebstedet eller kontakt deres kundeservice direkte. Kontaktoplysninger kan typisk findes på produktemballagen eller i producentens webwebsted.