Brugermanual

1. Introduktion

This manual provides essential information for the safe and effective use of your Electrical Car 16A Type 2 Charging Side Plug to Schuko Socket EV Charging Adapter. Please read this manual thoroughly before operation and retain it for future reference.

2. Sikkerhedsoplysninger

• Elektrisk fare: Always ensure the adapter and charging station are dry before connecting. Do not use if the adapter or cable is damaged.
• Korrekt brug: This adapter is designed for connecting an EV with a Type 2 inlet to a Schuko socket for charging. Do not use for purposes other than its intended design.
• Voltage og Strøm: Ensure the charging station's voltage and current output are compatible with the adapter's specifications (16A, 110-230V AC).
• Afbrydelse: To unplug the adapter from the charging station, you must stop the charging process manually at the station first.
• Temperatur: Avoid operating the adapter outside the specified temperature range of -30C to 50C.

3. Produktet er slutview

The EV charging adapter facilitates connection between an electric vehicle with a Type 2 charging inlet and a standard Schuko power outlet for charging. It is designed for durability and safe operation.

Figur 3.1: Overview of the Electrical Car 16A Type 2 to Schuko EV Charging Adapter. This image shows the complete adapter unit, featuring the Type 2 plug on one end and the Schuko socket on the other, connected by a durable cable.

Figur 3.2: Key components of the Type 2 to Schuko adapter. This image highlights the Type 2 plug, the Schuko socket, and the cable, indicating its 0.5-meter length and 16A, 1-phase rating.

Figur 3.3: Detaljeret view of the Type 2 plug and Schuko socket, showing internal components. The image points out the copper alloy, silver-plated contact pins, the rubber lid for protection, and the TUV AC cable specifications (3*2.5mm2 + 2*0.5mm2).

4. Opsætning

Before setting up, ensure your electric vehicle and the charging environment are suitable for this adapter.

1. Undersøg adapteren: Before each use, visually inspect the adapter for any signs of damage, cracks, or frayed cables. Do not use if damaged.
2. Klargør køretøjet: Ensure your electric vehicle's charging port is clean and free of debris.
3. Prepare the Power Source: Ensure the Schuko socket you intend to use is properly grounded and rated for 16A, 110-230V AC.

5. Betjeningsvejledning

Follow these steps to safely charge your electric vehicle using the adapter:

1. Connect to Charging Station (EV Inlet): Insert the Type 2 plug of the adapter firmly into your electric vehicle's Type 2 charging inlet. Ensure it clicks into place if your vehicle's system supports locking.
2. Tilslut til stikkontakten: Insert the Schuko plug from your EV charger (or the vehicle's charging cable if it has a Schuko plug) into the Schuko socket of the adapter. Then, plug the Schuko end of the adapter into a compatible wall socket.
3. Start opladning: Follow your vehicle's instructions to begin the charging process. Monitor the charging status.
4. Stop opladning: Before disconnecting, always stop the charging process manually at the charging station or through your vehicle's interface.
5. Afbryde: Once charging is stopped, first disconnect the Schuko plug from the wall socket, then disconnect the Schuko plug from the adapter, and finally, remove the Type 2 plug from your vehicle's inlet.

Figur 5.1: Diagram illustrating the correct connection method for the Schuko to Type 2 EV charging cable. It emphasizes the need to stop charging manually before unplugging and shows the adapter connecting directly to the charging station (vehicle's Type 2 inlet).

Figur 5.2: Visual guide on connecting the Type 2 plug to the EV charging station's inlet and the Schuko socket to a Schuko plug. This image clarifies the physical connection points for the adapter.

Figur 5.3: Examples of the adapter in use for EV charging. The image shows both correct and incorrect connection methods, emphasizing the proper way to connect the adapter for charging.

6. Vedligeholdelse

Proper maintenance ensures the longevity and safe operation of your adapter.

• Rensning: Clean the adapter with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure all contacts are free of dust and debris.
• Opbevaring: Store the adapter in a dry, cool place, away from direct sunlight and extreme temperatures. Keep the protective caps on the connectors when not in use.
• Inspektion: Regularly inspect the cable and connectors for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately and replace the adapter.

7. Fejlfinding

Hvis du støder på problemer med din adapter, kan du se følgende almindelige problemer og løsninger:

8. Specifikationer

9. Garanti og support

For garantioplysninger og teknisk support henvises til den dokumentation, der fulgte med dit køb, eller kontakt producenten direkte. Gem din købsbevis til garantikrav.