BEETECH B-M2 Moisture Meter User Manual

Indledning

The BEETECH B-M2 Moisture Meter is a professional instrument designed for accurately checking moisture content in various materials. It is suitable for wood, timber, paper, cardboard, and hardened building materials such as plaster, concrete, and mortar. This device operates on the principle of electrical impedance and utilizes advanced single-chip micro-computer technology to provide precise measurements by integrating characteristics of different materials for accurate calculation. It offers a non-destructive measuring method, ensuring the integrity of the measured object. The B-M2 features both an analog bar display and a digital display for clear readings, and its electrode pins are replaceable. This manual provides essential information for the proper setup, operation, and maintenance of your BEETECH B-M2 Moisture Meter.

Hvad er der i æsken

Upon unpacking your BEETECH B-M2 Moisture Meter, please ensure all the following components are present:

• BEETECH B-M2 Moisture Meter
• Beskyttende pose
• Brugervejledning (dette dokument)
• Batteri (9V)

Image: Contents of the BEETECH B-M2 Moisture Meter package, including the meter, manual, and battery.

Produktegenskaber

• Replaceable Electrodes: The meter features replaceable electrode pins (10mm length). Note: Electrodes are not included and must be purchased separately when replacement is needed.
• Dobbelt skærm: Simultaneous analog bar display and digital display for clear and comprehensive readings.
• Materialevalg: Selectable measurement modes for Wood and other building materials.
• Avancerede funktioner: Includes Maximum (MAX) and Minimum (MIN) reading retention, Auto Power Off, and an LCD display with backlight for visibility in various lighting conditions.
• Temperaturmåling: Simultaneous measurement of moisture and ambient temperature.

Opsætning

Installation af batteri

1. Locate the battery compartment cover on the back of the BEETECH B-M2 Moisture Meter.
2. Skub batteridækslet nedad for at åbne det.

Image: Hands opening the battery compartment cover on the back of the meter.
3. Connect the included 9V battery to the battery connector inside the compartment, ensuring correct polarity.


Image: Hands connecting and inserting a 9V battery into the meter's battery compartment.

4. Carefully place the battery into the compartment and slide the cover back into place until it clicks securely.

Betjeningsvejledning

Enhed overview

Billede: Forside view of the BEETECH B-M2 Moisture Meter, showing the LCD screen displaying moisture percentage and temperature, along with power, backlight, mode, and MAX/MIN buttons.

Tænd/sluk

• Tryk på Power-knap (U-shaped arrow icon) to turn the meter on.
• Måleren slukker automatisk efter en periode med inaktivitet for at spare på batteriet.

Selecting Material Mode

• Tryk på MODE knap to cycle through the available material types: Wood and Building Materials.
• The selected mode will be indicated on the LCD display. Ensure the correct mode is chosen for accurate measurements.

At tage en måling

1. After selecting the appropriate material mode, firmly press the electrode pins into the material you wish to measure. Ensure good contact.
2. The moisture content will be displayed digitally as a percentage (%) and also indicated on the analog bar graph.
3. The ambient temperature will also be displayed simultaneously.

Image: A hand holding the BEETECH B-M2 Moisture Meter, showing a moisture reading of 15.4% on the LCD display.

Using MAX/MIN Function

• Tryk på MAX / MIN knap til view the maximum or minimum moisture reading recorded during a measurement session.
• Press again to cycle between MAX, MIN, and current reading.

Baggrundslys kontrol

• Tryk på Baggrundslys knap (light bulb icon) to turn the LCD backlight on or off, improving visibility in low-light conditions.

Opretholdelse

Udskiftning af elektrode

The electrode pins are replaceable. If the pins become dull, bent, or damaged, they should be replaced to ensure accurate readings. Replacement electrodes (10mm length) are not included with the meter and must be purchased separately from authorized BEETECH dealers.

Rengøring og opbevaring

• Wipe the meter with a soft, dry cloth after each use. Do not use abrasive cleaners or solvents.
• Store the meter in its protective pouch in a cool, dry place away from direct sunlight and extreme temperatures.
• If the meter will not be used for an extended period, remove the battery to prevent leakage.

Fejlfinding

If you encounter issues with your BEETECH B-M2 Moisture Meter, please refer to the following common troubleshooting steps:

• Intet display/måleren tænder ikke:
  • Kontroller, om batteriet er korrekt installeret med den rigtige polaritet.
  • Udskift 9V-batteriet med et nyt.
• Upræcise læsninger:
  • Ensure the electrode pins are making firm and complete contact with the material.
  • Verify that the correct material mode (Wood or Building Materials) is selected.
  • Check if the electrode pins are damaged or dull; replace if necessary.
  • Ensure the material surface is clean and free from contaminants.
• Displayet er dæmpet:
  • Press the backlight button to activate the backlight.
  • Replace the battery if the display remains dim even with the backlight on.

If the problem persists after attempting these steps, please contact BEETECH customer support for further assistance.

Specifikationer

Garanti og support

For warranty information, technical support, or service inquiries regarding your BEETECH B-M2 Moisture Meter, please refer to the warranty card included with your product or contact BEETECH customer service directly. Contact details can typically be found on the manufacturer's official webwebstedet eller på produktemballagen.