Indledning
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ATDEC ORA Monitor ARM, Model AW-ORA-F-S. This monitor arm is designed to free up desk space and improve ergonomic comfort by allowing precise adjustment of your monitor's position. It supports monitors up to 35 inches, both flat and curved, with a weight range of 4.4 to 17.6 lbs (2 to 8 kg).
Læs venligst disse instruktioner omhyggeligt inden installation, og gem denne manual til senere brug.
Opsætningsinstruktioner
Follow these steps to correctly install your ATDEC ORA Monitor ARM.
1. Udpakning og komponentkontrol
Carefully remove all components from the packaging. Verify that all parts are present according to the packing list (not provided in this document, refer to your product packaging). If any parts are missing or damaged, do not proceed with installation and contact customer support.
2. Skrivebord Clamp Installation
The ORA Monitor ARM typically uses a desk clamp for secure attachment to your workstation.
- Placer skrivebordet clamp base på kanten af dit skrivebord.
- Spænd clamp screw until the arm is firmly secured to the desk. Ensure the clamp er stabil og vakler ikke.
Image: ATDEC ORA Monitor Arms with VESA plates and desk clamps. This image illustrates the different color options and the VESA mounting plate, which attaches to the back of your monitor, and the desk clamp that secures the arm to the desk.
3. Montering af skærmen
The ORA Monitor ARM uses a VESA mounting plate to attach to your monitor.
- Locate the VESA mounting holes on the back of your monitor. These are typically 75x75mm or 100x100mm apart.
- Attach the VESA plate from the monitor arm to the back of your monitor using the provided screws. Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor with the attached VESA plate and slide it onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanism present on the arm.
Image: Monitors mounted on ATDEC ORA arms in an office. This image demonstrates the monitor arm in use, showing two monitors attached to the arms and positioned on a desk, highlighting the space-saving and ergonomic benefits.
4. Kabelforvaltning
Route your monitor cables (power, video, etc.) through the integrated cable management channels or clips on the monitor arm. This helps maintain a tidy workspace and prevents cable damage.
Betjeningsvejledning
The ATDEC ORA Monitor ARM offers various adjustment capabilities for optimal viewkomfort.
- Højdejustering: Gently push or pull the monitor up or down to achieve the desired height. The gas spring mechanism will hold it in place.
- Justering af hældning: Tilt the monitor screen up or down to reduce glare and find your preferred viewvinkel.
- Drejejustering: Rotate the monitor left or right to share your screen with others or adjust your viewing stilling.
- Rotation (Portræt/Landskab): Drej skærmen 90 grader for at skifte mellem liggende og stående retning.
- Spændingsjustering: If the arm is too stiff or too loose for your monitor's weight, use the included Allen key to adjust the tension screw on the arm. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the monitor stays in position when released.
Opretholdelse
Regelmæssig vedligeholdelse sikrer din skærmarms levetid og optimale ydeevne.
- Rensning: Tør armfladerne af med en blød, tør kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Periodiske kontroller: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver fastspændte. Spænd efter om nødvendigt.
- Spænding: Re-adjust the tension if your monitor's weight changes or if the arm no longer holds its position correctly.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Monitor arm sags or drifts down. | Tension is too low for the monitor's weight. | Increase the gas spring tension using the Allen key (turn clockwise). |
| Monitor arm is difficult to move up or down. | Tension is too high for the monitor's weight. | Decrease the gas spring tension using the Allen key (turn counter-clockwise). |
| Skærmen vakler eller er ustabil. | Skrivebord clamp or VESA plate screws are loose. | Sørg for, at skrivebordet klamp is securely tightened. Check and tighten all VESA mounting screws on the monitor. |
| Cables are tangled or messy. | Forkert kabelføring. | Re-route cables through the integrated cable management channels or clips on the arm. |
Specifikationer
- Modelnummer: AW-ORA-FS
- Mærke: ATDEC
- Kompatible enheder: Overvåge
- Monteringstype: Bordplade Clamp
- Bevægelsestype: Vipning, drejning, rotation, højdejustering (gasfjeder)
- Understøttet skærmstørrelse: Up to 35 inches (Flat & Curved)
- Supported Monitor Weight: 4.4 til 17.6 lbs (2 til 8 kg)
- Varens vægt: 8.58 pund (ca. 3.89 kg)
- Pakkedimensioner: 22.44 x 7.09 x 5.31 tommer (ca. 57 x 18 x 13.5 cm)
- UPC: 881493020214
- ASIN: B0C8ZPWLR5
- Fabrikant: Atdec Pty Ltd
- Dato først tilgængelig: 22. juni 2023
Garanti og support
For warranty information, technical support, or to purchase replacement parts, please refer to the official ATDEC webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.
ATDEC Official Webwebsted: www.atdec.com