LOOM TREE JR1807Rxs

LOOM TREE 2.4G Bluetooth Controller JR1807Rxs Receiver

Instruktionsmanual

1. Introduktion

This manual provides instructions for the LOOM TREE 2.4G Bluetooth Controller JR1807Rxs Receiver, designed for use with children's electric ride-on cars. Please read this manual carefully before installation and operation to ensure correct usage and optimal performance.

2. Pakkens indhold

Pakken indeholder følgende komponenter:

  • Optional Remote Controller or 12V Receiver (depending on your purchase)

Note: This product is suitable for specific children's riding toys. Ensure that the purchased parts have the same appearance and model as your existing parts.

3. Opsætning og installation

3.1. Installation af batteri i fjernbetjening

The remote controller requires two AAA batteries (not included). Follow these steps to install the batteries:

  1. Find batterirummet på bagsiden af ​​fjernbetjeningen.
  2. Åbn batterirummets dæksel.
  3. Isæt to AAA-batterier, og sørg for at polariteten (+/-) vender korrekt.
  4. Luk batterirummets dæksel forsvarligt.
Back of the LOOM TREE 2.4G Bluetooth Controller showing the battery compartment

Billede: Bagside view of the remote controller, highlighting the battery compartment. Ensure batteries are inserted with correct polarity.

3.2. Frequency Matching (Pairing)

The remote controller and receiver must be paired before first use or after replacing the remote's batteries. This process establishes a connection between the remote and the electric ride-on car.

  1. Ensure the electric ride-on car is powered OFF.
  2. On the remote controller, simultaneously press and hold the Forward og Bagside buttons. The indicator light on the remote will begin to flash.
  3. While still holding the buttons on the remote, turn ON the power of the electric ride-on car.
  4. The remote's indicator light will stop flashing, indicating a successful connection.
  5. Slip Forward og Bagside buttons. The remote control is now ready for use.
Front view of the LOOM TREE 2.4G Bluetooth Controller showing buttons

Billede: Forside view of the remote controller, showing the layout of the control buttons including Forward and Reverse.

4. Betjening

After successful frequency matching, the remote controller can be used to operate the electric ride-on car. The buttons on the remote typically control movement (forward, reverse, left, right), speed, and other functions depending on the specific car model.

  • Use the directional controls (joysticks/buttons) to steer the car.
  • Tryk på Forward button to move the car forward.
  • Tryk på Bagside button to move the car backward.
  • Additional buttons may control speed, horn, music, or lights, depending on the car's features. Refer to your electric car's manual for specific button functions.

5. Vedligeholdelse

To ensure the longevity and proper functioning of your remote controller and receiver, follow these maintenance guidelines:

  • Rensning: Wipe the remote controller and receiver with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Opbevaring: Opbevar produktet på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
  • Batteripleje: Remove batteries from the remote controller if it will not be used for an extended period to prevent leakage.
  • Undgå fugt: Keep the remote controller and receiver away from water and other liquids to prevent damage.

6. Fejlfinding

If you encounter issues with your LOOM TREE 2.4G Bluetooth Controller JR1807Rxs Receiver, refer to the following common problems and solutions:

ProblemMulig årsagLøsning
Remote not controlling the car.Not paired correctly or batteries are low/dead.
  • Perform frequency matching again (see Section 3.2).
  • Replace the AAA batteries in the remote controller.
  • Ensure the car's power is ON.
Remote indicator light keeps flashing.Frekvensmatchning mislykkedes.Repeat the frequency matching process carefully (see Section 3.2). Ensure the car is turned on while holding the remote buttons.
Intermitterende kontrol.Interferens eller lavt batteri.
  • Flyt til et område med mindre trådløs interferens.
  • Udskift fjernbetjeningens batterier.

7. Specifikationer

ModelnummerJR1807Rxs (LTIN61048384)
MaterialePlast
Fjernbetjeningens dimensioner14 x 8 x 2.5 cm (5.51 x 3.15 x 0.98 tommer)
Receiver Dimensions (1816)7.5 x 3 x 8 cm (2.95 x 1.18 x 3.15 tommer)
Receiver Dimensions (JR1816)7.6 x 8 x 3 cm (2.99 x 3.15 x 1.18 tommer)
Receiver Dimensions (Red Chip 12V)9 x 8 x 3 cm (3.54 x 3.15 x 1.18 tommer)
Strømkilde (fjernbetjening)2 x AAA batterier (medfølger ikke)
Anbefalet alder5 - 15 år
OprindelseslandHong Kong
LOOM TREE 2.4G Bluetooth Controller with dimensions labeled

Image: Remote controller with approximate dimensions (14cm length, 8cm width, 2.5cm height) indicated.

8. Garanti og support

For product support, inquiries, or warranty information, please contact the manufacturer:

This product is covered by a 10-day replacement policy. Please refer to your purchase documentation for full details.

© 2023 LOOM TREE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.