Quantum Men's Analog Watch TTG1003.069 User Manual

Indledning

Thank you for choosing the Quantum Men's Analog Watch, Model TTG1003.069. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

Image: The Quantum Men's Analog Watch TTG1003.069, showcasing its design with a blue silicone strap and analog display.

Opsætning og førstegangsbrug

1. Unboxing: Carefully remove the watch from its packaging. Inspect for any protective films on the crystal or case back and remove them gently.
2. Kroneposition: The watch crown (the small knob on the side of the watch case) may be in a pulled-out position to conserve battery during shipping.
3. Indstilling af tid:
   • Træk kronen ud til tidsindstillingspositionen (normalt den yderste position).
   • Drej kronen med eller mod uret for at indstille time- og minutviserne til det korrekte klokkeslæt.
   • Once the time is set, push the crown back into its normal operating position against the watch case. The second hand should begin to move, indicating the watch is running.

Betjening af dit ur

Your Quantum TTG1003.069 watch is an analog timepiece powered by a quartz movement. It displays time using hour, minute, and second hands.

Tidsjustering

To adjust the time, follow the steps outlined in the 'Setting the Time' section above. Ensure the crown is fully pushed in after adjustment to maintain water resistance.

Vedligeholdelse og pleje

Rensning

To clean your watch, wipe the case and crystal with a soft, dry cloth. For the silicone strap, you may use a slightly damp cloth with mild soap, then rinse thoroughly and dry completely. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish.

Vandmodstand

This watch is rated for 100 meter (10 ATM) water resistance. This rating generally indicates suitability for swimming and snorkeling. However, the manufacturer specifically recommends against submerging the watch in water, stating it is designed to withstand only splashes, such as during hand washing or light rain. To ensure the longevity and integrity of your watch, it is advised to follow the manufacturer's more conservative recommendation and avoid full submersion.

Always ensure the crown is fully pushed in before any contact with water. Do not operate the crown while the watch is wet or submerged.

Udskiftning af batteri

Your watch is powered by a quartz movement, which requires a battery. When the watch stops running, it indicates the battery needs replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Fejlfinding

• Uret kører ikke:
  • Kontroller om kronen er trykket helt ind.
  • The battery may be depleted. Refer to the 'Battery Replacement' section.
• Tidsunøjagtighed:
  • Sørg for, at kronen er trykket helt ind efter indstilling af tiden.
  • Ekstreme temperaturer eller stærke magnetfelter kan påvirke nøjagtigheden. Undgå at udsætte uret for sådanne forhold.
  • If inaccuracy persists, the watch may require servicing by a professional.

Specifikationer

Garanti og support

Your Quantum watch comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your purchase or visit the official Quantum webwebsted.

For technical support, service, or warranty claims, please contact Quantum customer service through their official channels. Ensure you have your model number (TTG1003.069) and proof of purchase available when contacting support.