AOLIKES 902035 battery

AOLIKES 902035 Battery User Manual

Mærke: AOLIKES

Model: 902035 batteri

Indledning

This manual provides essential information for the safe and effective use of your AOLIKES 902035 3.7V 600mAh Lipo Rechargeable Battery Pack. This battery is designed for various portable electronic devices such as Bluetooth speakers, mini DVRs, pet GPS trackers, driving recorders, and dash cams, offering a reliable power source with a JST Ph1.25-2Pin plug.

Sikkerhedsoplysninger

Please read and understand all safety precautions before using the battery. Failure to follow these instructions may result in fire, electric shock, or injury.

  • Batteriet må ikke skilles ad, knuses, punkteres eller kortsluttes.
  • Udsæt ikke batteriet for høje temperaturer (over 60 °C / 140 °F) eller direkte sollys.
  • Nedsænk ikke batteriet i vand eller andre væsker.
  • Hold batteriet væk fra børn og kæledyr.
  • Use only chargers specifically designed for Lithium-ion batteries.
  • Hvis batteriet viser tegn på hævelse, lækage eller beskadigelse, skal brugen straks ophøre og bortskaffes korrekt.
  • Ensure correct polarity when connecting the battery. Incorrect connection can damage the battery and the device.

Produktegenskaber

  • 3.7V rechargeable replacement Lithium-ion battery with 600mAh capacity.
  • Suitable for various devices including Bluetooth speakers, MP3 players, PDAs, MP4 players, FM radios, wireless Bluetooth headsets, pet GPS, keychain cameras, mini DVRs, and electronic readers.
  • Nominel voltage 3.7V, fully charged 4.2V, Power 2.22Wh.
  • Item model PL902035.
  • Built-in battery protection circuit module (PMC) to prevent overdischarge and short circuit.
  • Compact size: 1.38 x 0.78 x 0.35 inches max (L*W*T).
  • Lightweight: approximately 0.4 oz.
  • Equipped with a genuine JST Ph1.25mm, 2-Pin plug connector.

Opsætning og installation

Before installing the new battery, carefully observe the polarity of the old battery and the device's connection points. Ensure the new battery's wires are connected correctly to avoid damage.

  1. Identificér polaritet: The red wire of the battery is the positive power connection ("+"). The black wire is the negative power connection ("-").
  2. Kontroller enhedsforbindelse: Before connecting, verify the corresponding positive and negative terminals on your device.
  3. Tilslut stikket: Carefully insert the JST Ph1.25mm, 2-Pin plug into the matching receptacle on your device. Ensure a secure fit.
  4. Polaritetsvending: If the original battery's wiring was reversed compared to the new battery's plug configuration, you may need to interchange the plug wires. This typically involves carefully releasing the pins from the connector housing and reinserting them in the correct orientation. Consult a professional if unsure.
AOLIKES 902035 3.7V 600mAh Lipo Rechargeable Battery with JST Ph1.25-2Pin Plug

Image: The AOLIKES 902035 battery showing its compact size, the 3.7V 600mAh rating, and the red and black wires leading to the JST Ph1.25-2Pin connector. The positive (+) and negative (-) markings are visible on the battery casing.

Betjeningsvejledning

Once installed, the battery will power your compatible device. For optimal performance and longevity:

  • Indledende opkrævning: Det anbefales at oplade batteriet helt inden første brug.
  • Opladning: Use a compatible charger designed for 3.7V Lithium-ion batteries. Do not overcharge or leave charging unattended for extended periods.
  • Udledning: Avoid completely draining the battery frequently, as this can reduce its lifespan. Recharge when the device indicates low power.
  • Temperatur: Operate the battery within recommended temperature ranges (typically 0°C to 45°C for charging, -20°C to 60°C for discharging).

Opretholdelse

Korrekt vedligeholdelse forlænger batteriets levetid:

  • Opbevaring: If storing the battery for an extended period, charge it to about 50-60% capacity and store it in a cool, dry place away from direct sunlight. Recharge every 3-6 months to prevent deep discharge.
  • Rensning: Keep the battery and its connectors clean and free from dust and debris. Use a dry, soft cloth for cleaning.
  • Inspektion: Periodically inspect the battery for any physical damage, swelling, or signs of leakage.

Fejlfinding

Hvis du støder på problemer med dit batteri, bør du overveje følgende:

  • Batteriet driver ikke enheden:
    • Sørg for, at batteriet er fuldt opladet.
    • Verify that the JST connector is securely plugged into the device.
    • Tjek polaritet: Double-check that the red wire is connected to the positive terminal and the black wire to the negative terminal of your device. If reversed, carefully correct the wiring (refer to "Setup and Installation" section).
    • Inspect the battery and device for any visible damage.
  • Batteri oplades ikke:
    • Ensure the charger is compatible and functioning correctly.
    • Check the charging port on your device and the battery connector for debris or damage.
    • Confirm the battery is not excessively hot or cold.
  • Kort batterilevetid:
    • Sørg for, at batteriet er fuldt opladet før brug.
    • Reduce power consumption of the device if possible.
    • Battery capacity naturally degrades over time and with cycles. If significantly reduced, consider replacement.

Specifikationer

AttributVærdi
BatteritypeLitium Polymer (LiPo)
Modelnummer902035 batteri
Nominel bindtage3.7V
Fuldt opladet Voltage4.2V
Kapacitet600mAh
Magt2.22Wh
Dimensioner (L x B x T)1.38 x 0.78 x 0.35 inches (max)
VægtCirka 0.4 ounce
Connector TypeJST Ph1.25mm, 2-Pin plug
Indbygget beskyttelsePMC (Protection Circuit Module) for overdischarge and short circuit

Garanti og support

For any questions, technical support, or warranty inquiries regarding your AOLIKES 902035 battery, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Manufacturer: AOLIKES

For yderligere hjælp kan du besøge AOLIKES Store on Amazon.

© 2024 AOLIKES. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.