A3 Gal Gamers 02 Rine Suzuki & Yuu Kunioka Character Acrylic Figure Instruction Manual

1. Introduktion

Tak for købetasing the A3 Gal Gamers 02 Rine Suzuki & Yuu Kunioka Character Acrylic Figure. This manual provides essential information for the proper setup, display, and care of your collectible figure. Please read these instructions carefully to ensure the longevity and enjoyment of your product.

2. Sikkerhedsoplysninger

• This product is a collectible item and not a toy. It is recommended for ages 15 years and up.
• Opbevares utilgængeligt for små børn for at forhindre utilsigtet indtagelse af små dele.
• Avoid exposing the figure to direct sunlight or high temperatures, as this may cause discoloration or deformation.
• Handle with care to prevent scratches or breakage. The edges of acrylic may be sharp.
• Brug ikke skrappe kemikalier eller slibende materialer til rengøring.

3. Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle komponenter er til stede og ubeskadigede:

• 1 x Gal Gamers 02 Rine Suzuki & Yuu Kunioka Character Acrylic Figure
• 1 x Base (if applicable, check packaging)

Hvis der mangler eller er beskadigede dele, bedes du kontakte forhandleren eller producenten for at få hjælp.

4. Opsætning og visning

This section guides you through the assembly and proper placement of your acrylic figure.

1. Udpakning: Carefully remove the figure and any accompanying base from its packaging. Retain packaging for future storage or transport.
2. Samling (hvis nødvendigt): If the figure comes with a separate base, gently insert the figure's tab into the slot on the base. Ensure a snug fit without forcing.
3. Placering: Choose a stable, flat surface for display. Avoid areas prone to vibrations, direct sunlight, or extreme temperature changes.
4. Beskyttende film: Some acrylic figures may have a thin protective film on one or both sides. Carefully peel this off for optimal clarity.

Image 1: The Gal Gamers 02 Rine Suzuki & Yuu Kunioka Character Acrylic Figure. This image shows the assembled figure, featuring the two characters Rine Suzuki and Yuu Kunioka in an official illustration style, standing on a clear base.

5. Håndtering og pleje

Proper handling and care will help maintain the condition of your figure.

• Always handle the figure by its base or edges to avoid touching the printed surface directly, which can leave fingerprints or cause damage over time.
• To clean dust, use a soft, dry microfiber cloth. Gently wipe the surface.
• For genstridige pletter, tør letampen a microfiber cloth with water and a tiny amount of mild soap (e.g., dish soap). Wipe gently, then dry immediately with a clean, dry microfiber cloth.
• Do not use alcohol, ammonia-based cleaners, or abrasive materials, as these can damage the acrylic or the printed illustration.

6. Fejlfinding

This section addresses common minor issues you might encounter.

• Figure is wobbly on base: Ensure the figure's tab is fully inserted into the base slot. If it's still loose, check for any debris in the slot or on the tab.
• Støvophobning: Use a soft brush or microfiber cloth to gently remove dust. For hard-to-reach areas, a can of compressed air (held upright and at a distance) can be used.
• Minor scratches: Acrylic is prone to minor surface scratches. Avoid rubbing vigorously. For very fine scratches, specialized acrylic polish kits are available, but use with caution and test on an inconspicuous area first.

7. Specifikationer

8. Garanti og support

This product is manufactured by A3. For any questions regarding product defects, missing parts, or general inquiries, please contact the retailer where the product was purchased or refer to the manufacturer's official webwebsted for supportoplysninger.

Gem venligst din købsbevis i tilfælde af garantikrav.