FITORCH V10 EDC lommelygte brugermanual

1. Produktet er slutview

The FITORCH V10 is a compact and powerful Everyday Carry (EDC) flashlight designed for versatile use. It features a high-brightness main LED, multi-color side lights including UV, red, green, and blue, and a magnetic tail cap. This manual provides instructions for safe and effective operation.

Image 1.1: FITORCH V10 EDC Flashlight, showing the device, a USB-C charging cable, and a keyring. The flashlight is compact and features two main light emitters and side lights.

Billede 1.2: Overview of FITORCH V10 features, including high brightness, beeping warning, multi-source sidelights, USB-C charging, magnetic adsorption, and mini portable design.

2. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• 1 x FITORCH V10 EDC Flashlight
• 1 x USB-C opladningskabel
• 1 x nøglering
• 1 x Brugermanual (dette dokument)

3. Opsætning og opladning

3.1 Indledende opladning

Before first use, fully charge the flashlight. The FITORCH V10 features a built-in 1000mAh rechargeable battery.

1. Find USB-C-opladningsporten på enheden.
2. Tilslut det medfølgende USB-C-kabel til lommelygten og en kompatibel USB-strømkilde (f.eks. computer, vægadapter).
3. Under opladning vil et rødt lys blinke.
4. Når den er fuldt opladet, lyser indikatorlampen konstant grønt.

Charging time is approximately 120-180 minutes (2-3 hours).

Image 3.1: Illustration of the FITORCH V10's internal 1000mAh built-in battery, highlighting its capacity for extended use.

Image 3.2: The bottom right panel shows the USB-C charging port and the indicator lights: red flashing for charging, green solid for full charge.

4. Betjeningsvejledning

The FITORCH V10 features two main buttons: a Power button (left) and a Mode button (right).

4.1 Betjening af hovedlys

The main light provides up to 1000 lumens of brightness with multiple modes.

Image 4.1: Illustration of the FITORCH V10's high brightness main light, capable of 1000 lumens and projecting light up to 100 meters.

• Tænd/sluk: Double-click the Power button to turn the main light ON. Long press the Power button to turn it OFF.
• Skift tilstande: While the main light is ON, click the Power button to cycle through High, Medium, Low, and Economic modes.
• Turbo tilstand: Long press the Power button from any state to activate Turbo mode. Release the button to turn off Turbo mode.

Image 4.2: Diagram illustrating the 5 main light modes (Turbo, High, Medium, Low, Economic) and their activation methods using the Power button.

4.2 Side Light Operation

The side lights offer various colors and functions, including UV light.

• Tænd/sluk: Double-click the Mode button to turn the side light ON. Long press the Mode button to turn it OFF.
• Skift tilstande: While the side light is ON, click the Mode button to cycle through White, Warm, Green, Red, Blue, Red Flash, Red & Blue Flash.
• UV-tilstand: Triple-click the Mode button from any state to enter UV mode.

Image 4.3: Diagram illustrating the multi-source sidelights (White, Warm, Green, Red, Blue, Red Flash, Red & Blue Strobe, UV Light) and their activation methods using the Mode button.

Billede 4.4: Eks.amples of 365nm UV light applications, including money inspection, antique appraisal, fluorescent agent detection, and treasure hunt.

4.3 Alarmfunktion

The flashlight includes an 80dB beeping alarm with flashing red and blue lights.

• Aktiver alarm: Triple-click the Power button from any state to activate the alarm (beeping + red and blue flashing).
• Deaktiver alarm: Long press the Power button to turn off the alarm.

4.4 Magnetic Tail Cap

The FITORCH V10 features a magnetic tail cap for convenient attachment to metal surfaces, allowing for hands-free operation.

Image 4.5: The top left panel shows the FITORCH V10 attached to a metal surface via its magnetic tail cap, illuminating an engine bay.

5. Vedligeholdelse

5.1 Rengøring

• Tør lommelygtens hus af med en blød kludamp klæde.
• Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Hold opladningsporten fri for støv og snavs.

5.2 Opbevaring

• Opbevar lommelygten et køligt, tørt sted væk fra direkte sollys.
• Ved langtidsopbevaring skal batteriet oplades til cirka 50% hver 3.-6. måned for at opretholde batteriets tilstand.

5.3 Pleje af batterier

• Undgå at aflade batteriet helt ofte.
• Brug kun det medfølgende USB-C-kabel eller et tilsvarende certificeret kabel til opladning.
• Forsøg ikke at udskifte det indbyggede batteri.

6. Fejlfinding

• Lommelygten tænder ikke:
  • Sørg for, at batteriet er opladet. Tilslut det til en strømkilde, og kontroller opladningsindikatoren.
  • Verify correct operation: Double-click the Power button for the main light, double-click the Mode button for side lights.
• Lysudbyttet er svagt:
  • Batteriet er muligvis lavt. Genoplad lommelygten.
  • Sørg for, at linsen er ren og fri for blokeringer.
• Flashlight gets warm during use:
  • It is normal for high-power LED flashlights to generate heat, especially in Turbo or High modes. This is a normal operating characteristic.
  • If the flashlight becomes excessively hot, reduce the brightness mode or turn it off to allow it to cool.
• Opladning virker ikke:
  • Kontrollér USB-C-kablet for skader, og sørg for, at det er korrekt tilsluttet både lommelygten og strømkilden.
  • Prøv et andet USB-C-kabel eller strømadapter.
  • Sørg for, at opladningsporten er ren.

7. Specifikationer

Image 7.1: The FITORCH V10 demonstrating its IPX4 splash-proof water resistance, indicating it is protected against water splashes from any direction.

8. Garanti og support

FITORCH products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official FITORCH webwebsted eller kontakt din forhandler.

Gem venligst dit købsbevis for garantikrav.