Syantek fjernbetjeningsstik BHC1802-2 brugermanual

1. Introduktion

Thank you for choosing the Syantek Remote Control Outlet. This device provides convenient wireless control over your electrical appliances, offering independent control for two sockets and a strong signal range. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Vigtige sikkerhedsoplysninger

• Kun til indendørs brug. Må ikke udsættes for vand eller fugt.
• Do not exceed the maximum load capacity of 15A, 1875W (Resistive) at 125V, 60Hz.
• Ensure the outlet is fully inserted into a standard 3-prong wall socket.
• Enheden må ikke skilles ad eller modificeres.
• Opbevares utilgængeligt for børn.
• Tag enheden ud af stikkontakten før rengøring.

3. Produktet er slutview

3.1 Pakkens indhold

• 2 x Remote Control Outlets
• 1 x fjernbetjening
• 1 x Battery (for remote)

3.2 Nøglefunktioner

• Independent 2 Sockets: Each outlet unit features two independently controllable sockets.
• Stærkt signalområde: Operates up to 100 feet, even through walls, doors, and windows.
• Kompakt design: 2-in-1 design occupies only one wall socket while providing two power options.
• Programmerbar: Allows custom programming for one remote to control multiple outlets or multiple remotes to control the same outlet.
• Nem at bruge: Plug-and-play functionality with no programming or tools required for basic operation.
• FCC certificeret: Meets strict safety and quality standards.

Image: Two Syantek remote control outlets and one remote controller.

Image: Diagram showing the dimensions of the Syantek remote control outlet (4.3 in / 10.8 cm length, 1.5 in / 3.8 cm height, 1.3 in / 3.4 cm depth) and highlighting the program button, included battery, 3-prong plug, and standard 3-hole socket.

4. Opsætningsvejledning

1. Indsæt batteri: Open the battery compartment on the back of the remote controller and insert the included battery, ensuring correct polarity.
2. Plug in Outlet: Plug the Syantek Remote Control Outlet into a standard 3-prong wall socket.
3. Tilslut apparat: Plug your desired appliance into one of the two sockets on the remote control outlet.
4. Test drift: Use the remote control to turn the connected appliance ON and OFF. The outlets are pre-programmed for immediate use.

Image: Various household items like kitchen appliances, humidifiers, fans, lamps, home decor, and holiday decorations are shown, illustrating the simple plug-and-play setup of the remote control outlet for different applications.

5. Operating Your Remote Control Outlet

5.1 Grundlæggende betjening

Each remote control outlet unit has two sockets, labeled '1' and '2' (or '3' and '4' for the second unit in a kit). The remote controller has corresponding buttons to control these sockets.

• Tryk på ON button next to the corresponding number (1, 2, 3, or 4) to turn on the appliance connected to that socket.
• Tryk på SLUKKET button next to the corresponding number (1, 2, 3, or 4) to turn off the appliance connected to that socket.

5.2 All On/All Off Function

The remote controller also features master control buttons:

• Trykke ALT TIL to turn on all connected sockets simultaneously.
• Trykke ALLE FRA to turn off all connected sockets simultaneously.

Image: A sequence of illustrations demonstrating independent control of light bulbs using the remote. Individual buttons (1, 2, 3, 4) turn specific bulbs on or off, and the 'ALL ON' and 'ALL OFF' buttons control all bulbs simultaneously.

6. Programmeringsvejledning

The Syantek Remote Control Outlet allows for custom programming to suit your needs. You can program one remote to control multiple outlets or multiple remotes to control the same outlet.

6.1 To Program an Outlet to a Remote Button:

1. Plug the remote control outlet into a wall socket.
2. Press and hold the small Program knap on the side of the outlet unit until the indicator light begins to flash.
3. While the indicator light is flashing, press the desired ON button (1, 2, 3, or 4) on your remote controller. The indicator light on the outlet will stop flashing and remain solid for a moment, then turn off, confirming successful programming.
4. Repeat for other sockets if you wish to assign them to different remote buttons.

6.2 To Clear Programming:

1. Unplug the remote control outlet from the wall socket.
2. Tryk og hold på Program knap on the side of the outlet unit while plugging it back into the wall socket.
3. Continue holding the Program Button for approximately 5 seconds until the indicator light flashes rapidly, then turns off. This indicates that all previous programming for that outlet unit has been cleared.

Image: An illustration showing how multiple Syantek remote control outlets can be controlled by a single remote, or how a single outlet can be controlled by multiple remotes, highlighting the programmable and expandable nature of the system.

7. Pleje og vedligeholdelse

• Rensning: Disconnect the device from the power outlet before cleaning. Wipe with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Opbevaring: Opbevar enheden på et køligt, tørt sted, når det ikke er i brug.
• Udskiftning af batteri: If the remote control's range decreases or it stops responding, replace the battery with a new 12V battery of the same type.

8. Fejlfindingsvejledning

9. Tekniske specifikationer

• Modelnummer: BHC1802-2
• Input bindtage: 125V AC 60Hz
• Maks strøm: 15A
• Maks effekt: 1875W (resistiv belastning)
• Trådløs frekvens: RF (Radio Frequency)
• Fjern række: Op til 100 fod (sigtelinje)
• Fjernbetjenings batteri: 12V (inkluderet)
• Driftstilstand: TÆND SLUK
• Certificeringer: FCC Listed
• Produktdimensioner: 4.53 x 4.06 x 2.44 inches (outlet unit)

10. Kundesupport

For any questions, concerns, or assistance with your Syantek Remote Control Outlet, please do not hesitate to reach out to our customer support team. While specific warranty details are not provided in this manual, our team is available to help with product inquiries and troubleshooting.

Please refer to the product packaging or the Syantek official webwebsted for kontaktoplysninger.