Locstar LS-8015 Smart Keyless Door Lock Instruction Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Locstar LS-8015 Smart Keyless Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. This electronic keypad lock offers enhanced security and convenience for various applications including homes, hotels, apartments, and offices.

2. Sikkerhedsoplysninger

• Forsøg ikke selv at skille låsen ad eller reparere den. Kontakt kundesupport for at få hjælp.
• Use only specified batteries (4 AA alkaline batteries). Do not mix old and new batteries or different types of batteries.
• Keep mechanical keys in a safe and accessible location outside the property.
• Avoid exposing the lock to extreme temperatures or direct water immersion. The lock has an IP54 waterproof rating, protecting against splashes, but not submersion.
• Regularly check battery levels and replace batteries promptly when the low battery indicator appears.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes.

Image: All components included in the Locstar LS-8015 Smart Keyless Door Lock package. This includes the front panel with keypad, rear panel, spring bolt, pivot, keys, protective pads, door buckle, instruction book, and various screws for installation.

• Front Panel with Keypad and Handle
• Rear Panel with Battery Compartment and Handle
• Mortise/Spring Bolt
• Pivot/Spindle
• Mekaniske nøgler (2)
• Beskyttelsespuder (2)
• Door Buckle/Strike Plate
• Instruktionsmanual
• Mounting Screws and Support Screws
• Skruenøgle

4. Installationsvejledning

Installation typically takes about 15 minutes with a Phillips screwdriver. No professional locksmith is required.

4.1 Door Handing Confirmation

The LS-8015 model is available for both left-handle and right-handle doors. Ensure you have the correct version for your door. The current product is a Left-Handle LS-8015.

Image: Visual guide for determining left-handed and right-handed door configurations, showing how the lock appears on each type of door.

4.2 Preparation and Drilling

1. Use the provided opening template to mark positions on the door frame for drilling.
2. Bor huller i henhold til de markerede positioner.
3. Install the lock mortise. The size can be adjusted to 60mm or 70mm.

Image: Visual steps for initial installation, including preparing accessories, installing the lock tongue, securing the front panel, using the wrench, inserting the center shaft, and aligning the holes.

4.3 Lock Assembly

7. Thread the cable through the back panel of the door.
8. Secure the back panel of the door with screws.
9. Tilslut ledningen.
10. Install four AA alkaline batteries into the battery compartment.
11. Press and hold the reset button for 10 seconds to reset the door lock to its original settings. (Press 0# for default unlocking).
12. Cover the back panel and tighten the screws to complete the installation.

Image: Visual steps for completing the installation, including threading cables, securing the back panel, connecting wires, installing batteries, resetting the lock, and final panel cover installation.

4.4 Installationsvideoguide

5. Betjeningsvejledning

5.1 Initial Debugging and Testing

• After installation, press down the front handle to confirm it is in the free state. The handle should move freely without engaging the latch.
• Enter the initial password (if applicable, refer to the reset section or default settings) on the front panel. After successful entry, press down the handle to open the door normally.

5.2 Mekanisk nøgleoverstyring

In case of battery depletion or electronic malfunction, the lock can be opened using the mechanical key.

1. Locate the button on the front handle cover. Press this button to reveal the keyhole.
2. Insert the mechanical key into the keyhole and turn it to unlock.
3. Press down the handle to open the door normally.

5.3 Setting the Master Password

The master password is used to enter the setting mode for managing user passwords and other lock functions.

1. Indtast # + 123456 + # to enter the setting mode. (123456 is the default master password).
2. Indtast 11# and then the new master password followed by #.
3. Enter the new master password followed by # again for confirmation.

5.4 Adding a Password User

You can add up to 50 different user codes.

1. Enter the new master password followed by # for at gå ind i indstillingstilstanden.
2. Indtast 01 + # to confirm, and then enter a user number (001-299) followed by # for at bekræfte.
3. Enter the desired user password followed by # for at bekræfte.
4. For temporary passwords, enter the start time followed by # to confirm, and the end time followed by # + # for at bekræfte.

5.5 Password Door Opening Operation

1. Enter the user password followed by # for at bekræfte.
2. Press the handle to open the door. A successful password entry will allow the handle to engage the latch.

Image: The Locstar LS-8015 Smart Keyless Door Lock, featuring a keypad for code entry and a handle for operation.

6. Vedligeholdelse

6.1 Udskiftning af batteri

The lock is powered by 4 AA batteries, which can last up to 1 year under normal conditions. A low battery indicator will remind you to replace them.

• When the low battery indicator activates, replace all four AA alkaline batteries promptly.
• Sørg for korrekt polaritet, når du isætter nye batterier.

6.2 Rengøring

For at bevare din låss udseende og funktionalitet:

• Tør låsens overflade af med en blød kludamp klæde.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or electronic components.

7. Fejlfinding

If you encounter issues with your Locstar LS-8015 lock, consider the following common solutions:

• Låsen svarer ikke: Check battery levels and replace if necessary. Ensure the cable connection between the front and rear panels is secure.
• Incorrect password entry: Verify that you are entering the correct master or user password. Ensure the keypad is clean and free from obstructions.
• Handle not engaging: Confirm that the lock is not in a 'free state' (e.g., after initial debugging). If the lock is unlocked electronically, the handle should engage. If not, check for mechanical obstructions or internal issues.
• Lock reset: If you forget your password or experience persistent issues, perform a factory reset by holding the reset button for 10 seconds. Note that this will erase all programmed passwords.

For yderligere assistance henvises til afsnittet om garanti og support.

8. Specifikationer

9. Garanti og support

Locstar provides a 12-month warranty for the LS-8015 Smart Keyless Door Lock. Additionally, lifetime technical support is available to ensure a positive user experience. If you have any questions or require assistance, please contact Locstar customer service.