Flysky FS-SR12 12CH 2.4Ghz ANT Protocol Receiver User Manual

1. Introduktion

The Flysky FS-SR12 is a high-performance 12-channel receiver designed for various remote-controlled models. It operates on the 2.4GHz ISM band using the advanced ANT protocol, ensuring reliable and stable communication. This receiver supports 12 PWM channel outputs, two-way transmission, transfer-back functionality, and Battery Voltage Detection (BVD).

Hvad er der i æsken

• Flysky FS-SR12 Receiver

The Flysky FS-SR12 receiver, a compact unit with two antennas and multiple ports for connection.

2. Specifikationer

Modtager overview Diagram

Detailed diagram of the FS-SR12 receiver's pinout and interfaces, including channel assignments and power connections.

Diagramnøgle:

• [1] CH1/PPM
• [10] CH10
• [2] CH2
• [11] CH11
• [3] CH3
• [12] CH12
• [4] CH4
• [13] BIND/VCC interface
• [5] CH5
• [14] BVD/VCC interface
• [6] CH6
• [15] SENS interface
• [7] CH7
• [16] SERVO/S.BUS interface
• [8] CH8
• [17] - (Power cathode)
• [9] CH9
• [18] + (Strømanode)
• [19] Signalpind
• [20] LED
• [21] Antenner
• [22] BIND knap
• [23] BVD sele
• [24] To connect battery anode
• [25] To connect battery cathode

BVD bindtage Detektionsområde: 0~70V

3. Opsætningsvejledning

Binding af modtageren

The FS-SR12 receiver needs to be bound to a compatible transmitter (e.g., FS-ST8) that supports the ANT protocol. Follow these steps:

1. Sørg for, at både senderen og modtageren er slukket.
2. Connect the BIND cable (or a bind plug) to the BIND/VCC interface on the receiver.
3. Power on the receiver. The LED indicator should flash rapidly, indicating it is in binding mode.
4. Put your transmitter into binding mode (refer to your transmitter's manual for specific instructions).
5. Once the binding is successful, the LED on the receiver will turn solid.
6. Power off both the receiver and transmitter, then power them back on to confirm the connection.

The Flysky FS-SR12 receiver with a bind plug inserted into the BVD/VCC port, illustrating the binding process.

Tilslutning af eksterne enheder

The FS-SR12 supports 12 PWM channels, as well as PPM, i-BUS, and S.BUS data outputs. Connect your servos, ESCs, and other peripherals to the corresponding channels.

• PWM-kanaler (1-12): Connect servos or Electronic Speed Controllers (ESCs) to these ports.
• PPM/i-BUS/S.BUS: Use the designated port for digital signal output to compatible flight controllers or other devices.
• BVD (Battery Voltage Detektion): Connect the BVD harness to the BVD/VCC interface to monitor battery voltage.

The Flysky FS-SR12 receiver with its two antennas and various connection ports clearly visible, demonstrating its compact design.

4. Betjening

Grundlæggende betjening

Once the receiver is successfully bound to your transmitter and all peripherals are connected, power on your model. The receiver will establish a connection with the transmitter, allowing you to control your model.

Two-Way Transmission and Telemetry

The FS-SR12 supports two-way transmission, enabling the receiver to send data back to the transmitter. This includes telemetry data such as battery voltage (via BVD function) and signal strength, providing real-time feedback during operation.

BVD Function

Batteriet Voltage Detection (BVD) function allows you to monitor the voltage of your model's battery directly from your compatible Flysky transmitter. Ensure the BVD harness is correctly connected to the BVD/VCC interface on the receiver and the battery.

5. Vedligeholdelse

To ensure the longevity and optimal performance of your FS-SR12 receiver, follow these maintenance guidelines:

• Hold modtageren ren og fri for støv, snavs og fugt.
• Avoid exposing the receiver to extreme temperatures outside its specified range (-10°C to +60°C).
• Ensure the humidity range (20% ~ 95%) is respected to prevent condensation or moisture damage.
• Regularly inspect the antennas for any damage or kinks. Ensure they are positioned correctly for optimal signal reception.
• Check all wire connections for secure fitment and signs of wear.
• Opbevar modtageren et tørt og køligt sted, når den ikke er i brug.

6. Fejlfinding

Intet signal / Tab af kontrol

• Checkbinding: Ensure the receiver is correctly bound to your transmitter. Re-bind if necessary.
• Strømforsyning: Verify that the receiver is receiving adequate power (3.5~9V/DC) and that the power source is stable.
• Antenneplacering: Ensure antennas are not obstructed by carbon fiber or metal parts and are positioned at a 90-degree angle to each other for best reception.
• Afstand: Operate within the specified distance (> 1500m air distance without interference).
• Interferens: Undgå at bruge den i nærheden af ​​stærke 2.4 GHz-interferenskilder (f.eks. Wi-Fi-routere, andre fjernbetjeningssystemer).

LED-indikatoradfærd

• Hurtigt blinkende: Modtageren er i bindingstilstand.
• Fast på: Receiver is successfully bound and receiving signal.
• Langsomt blinkende: Signal loss or no connection with transmitter.

Incorrect Channel Output

• Sender opsætning: Verify channel assignments and mixing settings on your transmitter.
• Modtagertilstand: Ensure the receiver is outputting the correct signal type (PWM/PPM/i-BUS/S.BUS) for your connected device.

7. Garanti og support

For warranty information, technical support, or further inquiries regarding your Flysky FS-SR12 receiver, please visit the official Flysky webwebsted eller kontakt din lokale forhandler.

Officiel Webwebsted: http://www.flysky-cn.com