Sena 3S Plus Bluetooth System Universal Microphone Kit User Manual

1. Introduktion

This manual provides detailed instructions for the proper use and maintenance of your Sena 3S Plus Bluetooth System Universal Microphone Kit. Please read this manual thoroughly before operating the device to ensure optimal performance and safety.

The Sena 3S Plus is a compact and powerful Bluetooth intercom system designed for motorcycle helmets, offering two-way HD intercom communication, music listening, and phone call capabilities.

2. Pakkens indhold

Bekræft at alle komponenter er til stede i din pakke:

• Sena 3S Plus Bluetooth System Universal Microphone
• USB-C ladekabel
• Mounting Accessories (e.g., hook and loop fasteners, speaker pads)
• Brugervejledning (dette dokument)

Image 1: Sena 3S Plus Bluetooth System Universal Microphone Kit. This image displays the main unit and included accessories.

3. Produktet er slutview

Familiarize yourself with the main components and controls of your Sena 3S Plus unit.

3.1 Hovedenhed

• Hovedknap: Used for power on/off, pairing, and intercom functions.
• Lydstyrke op-knap: Increases volume, navigates menus.
• Lydstyrke ned-knap: Decreases volume, navigates menus.
• USB-C-port: Til opladning og firmwareopdateringer.
• Mikrofon: Integrated for voice communication.
• Højttalere: Til lydudgang.

Note: Specific button locations and designs may vary slightly depending on the universal microphone kit type (boom or wired).

4. Installation og opsætning

Follow these steps to install the Sena 3S Plus into your helmet.

4.1 Montering af hovedenheden

1. Vælg placering: Select a flat surface on the left side of your helmet, near the bottom edge, for optimal microphone and speaker placement.
2. Ren overflade: Clean the chosen area thoroughly with an alcohol wipe and let it dry completely.
3. Attach Hook and Loop Fastener: Peel the backing from the hook and loop fastener (velcro) and firmly press it onto the helmet surface.
4. Tilslut hovedenhed: Align the main unit with the fastener and press firmly to secure it.

4.2 Højttalerinstallation

1. Locate Ear Pockets: Identificér ørelommerne inde i din hjelm.
2. Attach Speaker Pads: If necessary, use the provided speaker pads to adjust the speaker depth for comfort and clear audio.
3. Insert Speakers: Place the speakers into the ear pockets, ensuring they are centered over your ears. Route the speaker wires neatly under the helmet padding.

4.3 Placering af mikrofon

The 3S Plus comes with a universal microphone kit, which typically includes options for boom or wired microphones. Choose the one suitable for your helmet type (open-face/modular for boom, full-face for wired).

1. Boom-mikrofon: Attach the boom microphone to the inside of the helmet, positioning the microphone capsule approximately 1-2 cm from your mouth.
2. Kablet mikrofon: For full-face helmets, attach the wired microphone to the inside of the chin bar, ensuring it is close to your mouth and not obstructed.

Vigtig: Ensure all wires are tucked away and do not interfere with helmet removal or comfort.

5. Betjeningsvejledning

5.1 Tænd/sluk

• Tænd: Tryk og hold på Hovedknap for 1 second. The LED will flash blue.
• Sluk: Tryk og hold på Hovedknap for 5 seconds. The LED will flash red and the unit will power off.

5.2 Lydstyrkejustering

• Forøg lydstyrke: Tryk på Volumen op-knap.
• Skru ned for lydstyrken: Tryk på Volumen ned-knap.

5.3 Opladning

The Sena 3S Plus features USB-C charging.

1. Connect the supplied USB-C cable to the USB-C port on the main unit.
2. Tilslut den anden ende af kablet til en USB-strømkilde (f.eks. en computers USB-port eller en USB-vægadapter).
3. The LED will glow red during charging and turn blue when fully charged.

A full charge typically takes approximately 2.5 hours and provides up to 8 hours of talk time.

6. Bluetooth-parring

6.1 Parring med en mobiltelefon

1. With the 3S Plus powered off, press and hold the Hovedknap for 5 seconds until the LED flashes red and blue alternately. You will hear "Phone pairing".
2. Aktiver Bluetooth på din mobiltelefon, og søg efter enheder.
3. Select "Sena 3S Plus" from the list of detected devices.
4. Indtast PIN-koden "0000", hvis du bliver bedt om det.
5. Once paired, the LED will flash blue every 5 seconds.

6.2 Pairing with another Sena Headset for Intercom

The Sena 3S Plus supports two-way HD intercom communication.

1. Ensure both 3S Plus units are powered on.
2. On Enhed A, tryk på og hold nede Hovedknap for 5 seconds until the LED flashes red and blue alternately.
3. On Enhed B, tryk på og hold nede Hovedknap for 5 seconds until the LED flashes red and blue alternately.
4. The units will automatically search for each other and pair. Once paired, the LEDs on both units will flash blue.
5. To start/end intercom conversation, tap the Hovedknap på begge enheder.

The intercom range is up to 400 meters (approximately 1/4 mile) in open terrain.

7. Vedligeholdelse og pleje

• Rensning: Tør enheden af ​​med en blød, damp klæde. Brug ikke skrappe kemikalier eller opløsningsmidler.
• Opbevaring: Opbevar enheden på et køligt, tørt sted, når det ikke er i brug.
• Batteripleje: To prolong battery life, charge the unit at least once every six months if not used regularly. Avoid extreme temperatures.
• Vandtæthed: The unit is designed to be water-resistant, but avoid submerging it in water.

8. Fejlfinding

8.1 Fabriksindstilling

If the unit is not functioning correctly, a factory reset may resolve the issue. To perform a factory reset:

1. Når enheden er tændt, skal du trykke på og holde Hovedknap i 12 sekunder.
2. The LED will flash red rapidly, and you will hear "Factory reset".
3. The unit will power off. Power it on again to use.

Advarsel: A factory reset will delete all Bluetooth pairing information and settings.

9. Specifikationer

Bemærk: Specifikationerne kan ændres uden varsel.

10. Garanti og support

10.1 Garantioplysninger

The Sena 3S Plus Bluetooth System Universal Microphone Kit comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Sena webhjemmeside for detaljerede garantivilkår.

Gem dit købsbevis for garantikrav.

10.2 Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Sena customer support:

• Webwebsted: www.sena.com/support
• E-mail: Se Sena webwebsted for kontakt-e-mail.
• Telefon: Se Sena webhjemmeside for kontakttelefonnumre.

Before contacting support, please have your product model number (3SPLUS-WB-10) and purchase date available.