aigo ACSE240-BK

Aigo AC SE 240 Rainbow 240mm Water Cooler Instruction Manual

Model: ACSE240-BK

1. Produktet er slutview

The Aigo AC SE 240 is an all-in-one (AIO) liquid CPU cooler designed to provide efficient thermal management for your computer's processor. Featuring a 240mm radiator and two fans with Rainbow lighting, it offers effective cooling performance for a wide range of Intel and AMD sockets.

This manual provides essential information for the proper installation, operation, and maintenance of your Aigo AC SE 240 Water Cooler.

2. Pakkens indhold

Please verify that all components listed below are present in your package before proceeding with the installation.

Aigo AC SE 240 Water Cooler components including radiator, pump, fans, and mounting hardware

Billede: All components included with the Aigo AC SE 240 Water Cooler, laid out on a white background. This includes the radiator with two fans, the CPU block/pump, tubing, various mounting brackets for Intel and AMD sockets, screws, thermal paste, and a fan/RGB controller.

  • 240mm Radiator with integrated pump/CPU block and tubing
  • Two 120mm Fans (Rainbow lighting)
  • Intel Mounting Bracket Kit (LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X)
  • AMD Mounting Bracket Kit (FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4)
  • Bagplade til Intel-sokler
  • Monteringsskruer og afstandsstykker
  • Termisk pasta
  • Fan/RGB Controller (if applicable, inferred from image)
  • Brugervejledning (dette dokument)

3. Installationsvejledning

This section provides general steps for installing the Aigo AC SE 240 Water Cooler. Refer to your motherboard and PC case manuals for specific instructions regarding component placement and cable management.

3.1 Prepare the CPU and Motherboard

  1. Sørg for, at dit system er slukket og afbrudt fra strømkilden.
  2. Remove any existing CPU cooler. Clean the CPU surface thoroughly with isopropyl alcohol to remove old thermal paste.
  3. Identify the correct mounting bracket for your CPU socket (Intel or AMD).

3.2 Installer radiator og ventilatorer

Aigo AC SE 240 Water Cooler with rainbow fans

Billede: The Aigo AC SE 240 Water Cooler showing the 240mm radiator with two fans attached, displaying their rainbow LED lighting. The pump/CPU block is connected via two braided tubes.

  1. Attach the two 120mm fans to the radiator using the provided long screws. Ensure the fan airflow direction is correct for your case (typically intake or exhaust).
  2. Mount the radiator assembly to an available 240mm fan mount in your PC case (e.g., top, front, or rear). Use the appropriate screws to secure it.

3.3 Install the CPU Block/Pump

  1. Apply a small amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient.
  2. Attach the correct mounting standoffs and brackets to your motherboard around the CPU socket. For Intel sockets, you may need to install the backplate first.
  3. Carefully place the CPU block/pump onto the CPU, aligning the mounting holes.
  4. Secure the CPU block/pump with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

3.4 Tilslut kabler

  1. Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. If neither is available, use a SYS_FAN header.
  2. Connect the fan power cables to the CPU_FAN and/or SYS_FAN headers on your motherboard, or to the included fan/RGB controller.
  3. Connect the RGB cables from the fans and pump to the included RGB controller, and then connect the controller to an available RGB header on your motherboard (if applicable) or a SATA power connector.
  4. Organize cables for optimal airflow and aesthetics.

4. Betjeningsvejledning

Once installed, the Aigo AC SE 240 Water Cooler operates automatically. The pump and fans will adjust their speeds based on CPU temperature, as controlled by your motherboard's BIOS/UEFI settings or dedicated software.

  • BIOS/UEFI-indstillinger: Access your motherboard's BIOS/UEFI to configure fan curves and pump speed settings. It is recommended to set the pump to run at 100% speed for optimal cooling performance and to prevent air bubbles from settling.
  • Software kontrol: If your motherboard supports it, you may use manufacturer-provided software to fine-tune fan speeds, monitor temperatures, and customize RGB lighting effects.
  • Indledende opstart: During the first few minutes of operation, you might hear gurgling sounds as air bubbles are purged from the loop. This is normal and should subside.
Top view of Aigo AC SE 240 Water Cooler pump and radiator

Billede: En top-down view of the Aigo AC SE 240 Water Cooler, highlighting the CPU block with its illuminated Aigo logo and the two rainbow-lit fans on the radiator.

5. Vedligeholdelse

Regular maintenance ensures optimal performance and longevity of your water cooler.

  • Støvrensning: Rengør regelmæssigt støv fra kølerribberne og ventilatorbladene med trykluft eller en blød børste. For meget støv kan hæmme luftstrømmen og reducere køleeffektiviteten.
  • Inspektion af rør: Visually inspect the tubing and connections for any signs of leaks, kinks, or damage. Address any issues immediately.
  • Pumpestøj: If the pump starts making unusual noises, it may indicate air trapped in the loop or a failing pump. Ensure the pump is running at full speed and try gently tilting your PC case to help dislodge air bubbles.

6. Fejlfinding

This section addresses common issues you might encounter with your Aigo AC SE 240 Water Cooler.

ProblemMulig årsagLøsning
Høje CPU-temperaturer
  • Forkert påføring af termisk pasta
  • CPU block not seated correctly
  • Pump not running or running too slow
  • Ventilatorerne drejer ikke eller drejer for langsomt
  • Radiator tilstoppet med støv
  • Påfør termisk pasta igen
  • Reseat CPU block, ensure even pressure
  • Check pump power connection, set pump to 100% in BIOS
  • Check fan connections, configure fan curves in BIOS
  • Rengør kølerlameller
Fans/RGB not lighting up
  • Loose RGB cable connection
  • RGB controller not powered or faulty
  • Incorrect RGB header connection
  • Verify all RGB cables are securely connected
  • Ensure RGB controller has SATA power and is connected to motherboard
  • Check motherboard manual for correct RGB header type (e.g., 5V ARGB vs 12V RGB)
Usædvanlig pumpelyd
  • Luftbobler i løkken
  • Pumpefejl
  • Gently tilt the PC case to help dislodge air bubbles. This may take some time.
  • Ensure pump is running at 100%. If noise persists and cooling is affected, contact support.

7. Specifikationer

Detailed technical specifications for the Aigo AC SE 240 Water Cooler.

  • Model: ACSE240-BK
  • Intel Socket Compatibility: LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X
  • AMD Socket Compatibility: FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4
  • Rørlængde: 395 mm
  • Pumpehastighed: 3200 ± 10 % RPM
  • Pumpe voltage: 12V
  • Radiator dimensioner: 274 x 120 x 27 mm
  • Ventilatordimensioner: 120 x 120 x 25 mm
  • Blæserhastighed: 800 ~ 1800 omdr./min
  • Luftstrøm: 64.05 CFM
  • Støjniveau: 30 dBA ± 10%
  • TDP: 210W
  • Afkølingsmetode: Væske (Vand)
  • Kompatible enheder: Desktop

8. Garanti og support

For garantioplysninger, teknisk support eller serviceforespørgsler henvises til den officielle Aigo webwebstedet eller kontakt din forhandler. Gem din købsbevis til garantikrav.

Official Aigo Webwebsted: www.aigocooler.com (Bemærk: Dette er en pladsholder URL. Please verify the actual official website for Aigo products.)

© 2024 Aigo. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.