Intelbras GX 3000 Wireless Mesh Router User Manual

1. Introduktion

The Intelbras GX 3000 is a multifunction wireless mesh router designed to provide high-speed internet connectivity via 5G/4G networks and Wi-Fi 6. This device integrates advanced Qualcomm technology for both its 5G modem and Wi-Fi 6 solution, ensuring high performance and reliability. It supports up to 128 devices simultaneously on the Wi-Fi network and offers wired connectivity options. The GX 3000 is suitable for various environments, from home to office, providing robust network performance.

This manual provides instructions for setting up, operating, and maintaining your Intelbras GX 3000 router. Please read it carefully before use.

2. Package Contents & Device Overview

2.1. Pakkens indhold

• Intelbras GX 3000 Wireless Mesh Router
• Strømadapter
• Netværkskabel
• Lynstartguide (ikke inkluderet i denne manual)

2.2. Enhed overview

Figur 1: Forside View of the GX 3000 Router

This image displays the front of the Intelbras GX 3000 router, showing its sleek white design and LED indicators for 5G, 4G, call status, Wi-Fi, and WPS button.

Figure 2: GX 3000 Router with Highlighted Indicators and Ports

This image provides a closer look at the router, emphasizing the LED indicators on the front (5G, 4G, Call, Wi-Fi, WPS) and the various ports located on the rear panel, including LAN, WAN, and TEL ports.

2.2.1. Porte på bagpanelet

Figure 3: Rear Panel of the GX 3000 Router

This image shows the rear panel of the router, clearly displaying the LAN, WAN, and TEL ports for wired connections.

• LAN-porte: For connecting wired devices such as computers, smart TVs, or gaming consoles.
• WAN -port: For connecting to an external modem or internet source (if not using 5G/4G).
• TEL Port: For voice services (if supported by your service provider).
• Strømindgang: Tilsluttes den medfølgende strømadapter.

2.2.2. Bottom Panel Features

Figure 4: Bottom Panel Features of the GX 3000 Router

This diagram illustrates the bottom panel of the router, highlighting the TEST port, RESET button, and SIM CARD slot.

• TEST Port: Til diagnostiske formål.
• Genstarts knap: Used to restore factory default settings. Press and hold for 10 seconds while the device is powered on.
• SIM CARD Slot: Insert your 5G/4G SIM card here for mobile broadband connectivity.

3. Opsætning

3.1. Indledende placering

Place the router in a central location within your desired coverage area, away from obstructions, metal objects, and other electronic devices that may cause interference. Ensure good ventilation around the device.

3.2. Isætning af SIM-kortet

1. Sørg for, at routeren er slukket.
2. Locate the SIM CARD slot on the bottom panel of the router (refer to Figure 4).
3. Insert your activated 5G/4G SIM card into the slot with the gold contacts facing down and the notched corner oriented correctly. Push until it clicks into place.
4. To remove, gently push the SIM card in again until it springs out.

3.3. Tilslutning af strøm

1. Connect one end of the power adapter to the Power Input port on the rear of the router.
2. Sæt den anden ende af strømadapteren i en almindelig stikkontakt.
3. The router will power on automatically. Wait for the LED indicators to stabilize.

3.4. Kabelbaserede forbindelser (valgfrit)

If you wish to connect devices via Ethernet:

1. Connect one end of the provided network cable to a LAN port on the rear of the router.
2. Connect the other end of the network cable to the Ethernet port of your computer, smart TV, or other wired device.

3.5. Første Wi-Fi-forbindelse

The default Wi-Fi network name (SSID) and password are usually printed on a label on the bottom of the router. Follow these steps to connect:

1. On your wireless device (smartphone, laptop, tablet), open the Wi-Fi settings.
2. Scan for available networks and select the SSID corresponding to your GX 3000 router.
3. Indtast standard Wi-Fi-adgangskoden, når du bliver bedt om det.
4. Once connected, you can access the router's web brugerflade til at tilpasse indstillinger.

4. Betjeningsvejledning

4.1. LED-indikatorer

LED'erne på frontpanelet giver statusoplysninger:

• 5G LED: Angiver 5G-netværksstatus.
• 4G LED: Angiver 4G-netværksstatus.
• Call LED: Indicates voice service status.
• Wi-Fi LED: Angiver Wi-Fi-netværksaktivitet.
• WPS LED: Angiver WPS-funktionens status.

Refer to the full user manual (if provided separately) for detailed LED behavior (e.g., solid, blinking, color) and their meanings.

4.2. Adgang til Web Management interface

To configure advanced settings, manage your network, or change Wi-Fi credentials, access the router's web grænseflade:

1. Ensure your device is connected to the GX 3000's Wi-Fi network or via an Ethernet cable.
2. Åbn a web browser (f.eks. Chrome, Firefox, Edge).
3. I adresselinjen skal du indtaste routerens standard-IP-adresse (normalt 192.168.1.1 or 192.168.0.1) and press Enter. This information is usually on the label on the bottom of the router.
4. Enter the default username and password (also found on the router label).
5. You will now be in the router's management interface, where you can customize settings such as Wi-Fi name, password, security protocols, and more.

4.3. Wi-Fi Protected Setup (WPS)

WPS allows you to connect Wi-Fi devices without entering the password manually:

1. Press the WPS button on the front of the GX 3000 router (refer to Figure 1). The WPS LED will start blinking.
2. Within two minutes, press the WPS button on your client device (e.g., Wi-Fi adapter, printer).
3. Enhederne vil automatisk oprette forbindelse.

Note: WPS is a convenient feature but may be less secure than manual password entry.

4.4. Mesh Network Expansion

The GX 3000 supports mesh networking to expand Wi-Fi coverage. You can add other compatible Intelbras Qi5 line products to create a seamless mesh network. Each additional Wi-Fi 6 router can extend coverage by up to 300 m². It is recommended to use up to 6 routers in the same mesh network for optimal performance.

Refer to the specific instructions provided with additional mesh units for pairing and configuration.

5. Vedligeholdelse

5.1. Rengøring af enheden

• Ensure the router is powered off and unplugged before cleaning.
• Brug en blød, tør klud til at aftørre enhedens ydre.
• Do not use liquid cleaners, aerosols, or solvents, as they may damage the casing eller interne komponenter.
• Hold ventilationsåbningerne fri for støv og snavs.

5.2. Firmwareopdateringer

Tjek regelmæssigt den officielle Intelbras-konto webwebsted for firmwareopdateringer. Firmwareopdateringer kan forbedre ydeevnen, tilføje nye funktioner og forbedre sikkerheden. Følg vejledningen, der følger med firmwareopdateringspakken, omhyggeligt.

5.3. Nulstilling til fabriksindstillinger

If you encounter persistent issues or forget your login credentials, you can reset the router to its factory default settings:

1. With the router powered on, locate the RESET button on the bottom panel (refer to Figure 4).
2. Using a paperclip or a similar pointed object, press and hold the RESET button for approximately 10 seconds.
3. Release the button. The router will restart with all settings restored to their original factory defaults.
4. You will need to reconfigure your Wi-Fi settings and any other custom configurations after a factory reset.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

8.1. Garantioplysninger

Intelbras products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Intelbras webwebsted. Gem din købsbevis til garantikrav.

8.2. Teknisk support

If you require technical assistance or have questions not covered in this manual, please contact Intelbras customer support. You can find contact information (phone numbers, email, support portal) on the official Intelbras webwebsted:

Intelbras Officiel Webwebsted: www.intelbras.com.br

When contacting support, please have your product model (GX 3000) and serial number ready.