Feit Electric LED Security Light Instruction Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH). This outdoor flood light features an adjustable three-head design, motion sensor, and dusk-to-dawn functionality, providing 5000 lumens of 5000K Daylight illumination.

Læs venligst disse instruktioner grundigt inden installation, og gem denne manual til senere brug.

2. Sikkerhedsoplysninger

ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.

• Ensure the electrical supply is turned off before beginning installation.
• Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
• Brug kun UL/cUL-godkendte ledningsforbindelser.
• Forsøg ikke at ændre armaturet. Enhver ændring kan ugyldiggøre garantien og skabe en sikkerhedsrisiko.
• The LED light source is integrated and cannot be replaced.

3. Pakkens indhold

Kontroller, at alle dele er til stede, før installationen påbegyndes:

• 1 x Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH)
• Monteringsudstyr (skruer, trådmøtrikker)

Image 3.1: Packaging of the Feit Electric LED Security Light, showing the product and key features.

4. Installationsvejledning

This fixture is designed for wall-mount installation and requires hardwiring.

4.1 Nødvendigt værktøj (medfølger ikke)

• Phillips skruetrækker
• Afisoleringstænger
• Tang
• Elektrisk tape
• Sikkerhedsbriller

4.2 Montering af armaturet

1. Sluk for strømmen ved afbryderen eller sikringsboksen.
2. Remove the existing fixture (if applicable) and its mounting bracket.
3. Attach the new mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
4. Feed the electrical wires from the junction box through the center hole of the mounting plate.

Image 4.1: Diagram illustrating the hands-free wiring and mounting back plate for easy installation.

4.3 Wiring the Fixture

1. Tilslut den sorte ledning fra armaturet til den sorte (varme) ledning fra samledåsen ved hjælp af en trådmøtrik.
2. Tilslut den hvide ledning fra armaturet til den hvide (neutrale) ledning fra samledåsen ved hjælp af en trådmøtrik.
3. Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box using a wire nut.
4. Stik forsigtigt alle ledninger ind i samledåsen.

4.4 Fastgørelse af armaturet

1. Juster armaturet med monteringspladen, og fastgør det med de medfølgende skruer.
2. Ensure the fixture is flush against the mounting surface to prevent water intrusion.
3. Adjust the three light heads to direct illumination as desired. The heads are adjustable to provide up to 270 degrees of light coverage.

Image 4.2: The security light showing its adjustable heads and the motion and dusk-to-dawn sensor controls.

Image 4.3: The Feit Electric LED Security Light installed on an exterior wall, providing bright illumination at night.

5. Betjeningsvejledning

This security light features both a motion sensor and a dusk-to-dawn sensor for automated operation.

5.1 Bevægelsessensorens funktionalitet

• The integrated motion sensor detects movement up to 60 feet away.
• When motion is detected at night, the light will activate.
• The duration the light stays on after motion detection can be adjusted using the 'TIMER' dial on the sensor.
• The sensitivity of the motion sensor can be adjusted using the 'SENSITIVITY' dial to control the detection range.

5.2 Dusk-to-Dawn Functionality

• The built-in photocell sensor automatically turns the light on at dusk and off at dawn.
• This feature works in conjunction with the motion sensor, ensuring the light only activates when needed during nighttime hours.
• An 'Auto Dusk 'til Dawn override' feature is available, allowing the fixture to remain on continuously from dusk to dawn if desired. Consult the sensor control diagram for specific settings.

Image 5.1: Comparison showing the Feit Electric LED Security Light operating with its Dusk-to-Dawn feature, turning on automatically at night and off at dawn.

5.3 Justering af lysstyrke

The light output is dimmable from 500 lumens to 5000 lumens. This adjustment is typically controlled via the sensor unit, allowing you to set the desired brightness level for your security needs.

Image 5.2: Diagram illustrating the wide-beam optics of the security light, showing effective illumination distances at various heights.

6. Vedligeholdelse

The Feit Electric LED Security Light is designed for long-lasting, maintenance-free operation. The integrated LEDs have an average life of 50,000 hours and do not require replacement.

6.1 Rengøring

• To clean the fixture, ensure power is off at the circuit breaker.
• Tør ydersiden af ​​med en blød, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de elektriske komponenter.
• Keep the motion sensor lens clean to ensure optimal performance.

Image 6.1: The security light is shown enduring rain, highlighting its all-weather cast aluminum housing and wet-location rating (IP65).

7. Fejlfinding

8. Specifikationer

Image 8.1: Visual representation of key specifications including dimensions, CCT, wattage, brightness, life hours, IP rating, and voltage.

Image 8.2: The security light installed on a garage, featuring the Energy Star certification logo, indicating energy efficiency.

9. Garanti og support

9.1 Garantioplysninger

According to the product information, there is no specific warranty description provided for this product.

9.2 Kundesupport

For technical assistance or further inquiries, please visit the Feit Electric website or contact their customer service department. Refer to the product packaging for the most current contact information.