Lexip PIXMINDS Steelplay Adventure Twinpads Brugermanual

Indledning

The Lexip PIXMINDS Steelplay Adventure Twinpads are designed to enhance your gaming experience on compatible systems. These controllers offer precise input and comfortable handling for extended play sessions. This manual provides essential information for setup, operation, maintenance, and troubleshooting.

Pakkens indhold

Når du åbner pakken, skal du sørge for, at alle komponenter er til stede:

• Lexip PIXMINDS Steelplay Adventure Twinpads (Left and Right controllers)
• Brugervejledning (dette dokument)
• Required Lithium Ion batteries (pre-installed or included)

Image: The retail packaging for the Lexip PIXMINDS Steelplay Adventure Twinpads, showing the controllers and compatibility information.

Opsætning

The Twinpads are compatible with Nintendo Switch™ and Nintendo Switch™ OLED models. They connect wirelessly via Bluetooth.

1. Charging the Twinpads

The Twinpads come with Lithium Ion batteries. Before first use, ensure they are fully charged. The LED indicators on the controllers will show charging status.

2. Parring med din enhed

1. Sørg for, at din Nintendo Switch-konsol er tændt og opdateret til den nyeste systemsoftware.
2. Fra HOME-menuen skal du vælge "Controllere" > "Skift greb/rækkefølge".
3. On each Twinpad, press and hold the small pairing button located on the side or back until the player LEDs begin to flash.
4. Once the LEDs stop flashing and remain solid, the Twinpad is successfully paired.
5. Repeat for the other Twinpad.

Billede: Forside view of the Lexip PIXMINDS Steelplay Adventure Twinpads, showing the joysticks, D-pad, and action buttons.

Billede: Side view of the Lexip PIXMINDS Steelplay Adventure Twinpads, highlighting the rail for attachment and potential pairing button location.

Billede: Bagside view of the Lexip PIXMINDS Steelplay Adventure Twinpads, showing the ergonomic design and additional buttons.

Betjeningsvejledning

Once paired, the Twinpads function as independent left and right controllers, similar to the original Joy-Con controllers. They can be used for various games that support detached controller play.

Knaplayout og funktioner

• Left Twinpad: Analog Stick, D-pad, Minus (-) Button, Screenshot Button, SL/SR Buttons (on side rail).
• Right Twinpad: Analog Stick, A/B/X/Y Buttons, Plus (+) Button, Home Button, SL/SR Buttons (on side rail).
• Note: Specific button functions may vary depending on the game.

Genopretter forbindelse

If the Twinpads disconnect or you wish to reconnect them after turning off the console, simply press any button on each Twinpad. They should automatically reconnect to the last paired console.

Opretholdelse

Proper care will extend the lifespan of your Twinpads.

• Rensning: Use a soft, dry cloth to wipe the surface of the controllers. For stubborn dirt, slightly dampRengør kluden med vand. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Store the Twinpads in a cool, dry place away from direct sunlight and extreme temperatures.
• Batteripleje: If storing for an extended period, ensure the batteries are partially charged (around 50%) to maintain battery health. Avoid fully discharging the batteries for long periods.

Fejlfinding

If you encounter issues with your Twinpads, try the following solutions:

• Controllers not pairing:
  • Ensure the Twinpads are charged.
  • Verify Bluetooth is enabled on your console.
  • Try re-pairing the controllers by following the "Pairing with Your Device" steps.
  • Move closer to the console to ensure a strong Bluetooth signal.
  • Genstart din Nintendo Switch-konsol.
• Inputforsinkelse eller afbrydelse:
  • Ensure there are no obstructions between the controllers and the console.
  • Minimér interferens fra andre trådløse enheder.
  • Kontroller batteriniveauer og genoplad om nødvendigt.
• Knapper reagerer ikke:
  • Rengør rundt om knapperne for at fjerne snavs.
  • Ensure the controllers are properly paired and connected.
  • Test the controllers in a different game or the console's controller test menu.

Specifikationer

Garanti og support

The Lexip PIXMINDS Steelplay Adventure Twinpads come with a 5 års garanti, as indicated on the product packaging. To register your product and activate your warranty, please visit the official warranty registration page:

Register Your Product for Warranty

For technical support or further inquiries, please refer to the official Lexip support channels or contact your retailer.