Digital Temperature Controller Thermostat Timer

1. Introduktion

This manual provides detailed instructions for the operation and maintenance of your MakerHawk TC816 Digital Temperature Controller Thermostat Timer. This versatile device is designed for precise temperature and timing control across various applications, including reptile enclosures, incubators, terrariums, freezers, refrigerators, home brewing, and more. Please read this manual thoroughly before use to ensure safe and optimal performance.

Figure 1: MakerHawk TC816 Digital Temperature Controller with sensor probe.

2. Sikkerhedsoplysninger

For at sikre sikker drift og forhindre skader skal følgende sikkerhedsretningslinjer overholdes:

• Strømkilde: Ensure the device is connected to a 120V AC power supply. The maximum load is 15A/1800W. Do not exceed these limits.
• Sikker forbindelse: The plug features highly conductive copper plates for efficient power transfer and rust resistance. Ensure it is fully inserted into a compatible outlet.
• Børnesikkerhed: The safety socket is designed to prevent accidental insertion by children. Keep the device out of reach of young children.
• Materialesikkerhed: Enheden casing is made from PC flame-retardant material, offering high-temperature flame resistance.
• Miljøforhold: Undgå at udsætte enheden for ekstreme temperaturer, fugtighed eller direkte kontakt med vand.
• Sondens placering: Ensure the temperature sensor probe is correctly placed in the environment you wish to monitor and control.

Figure 2: Illustration of safety features including high conductivity copper plate, safety protection door, and strong flame retardant material.

3. Produktet er slutview

The MakerHawk TC816 features a clear LCD display and intuitive button controls for easy operation. Key components include:

• LCD-skærm: Shows measured temperature, set temperatures, and timer settings.
• Kontrolknapper: MODE, SET, UP, DOWN for navigation and setting adjustments.
• Sensorprobe: 1.7m NTC temperature sensor for accurate readings.
• US stik: Standard 3-prong plug for power input.
• Kontrolleret udtag: For connecting heating or cooling devices.
• Nulstil knap: Small button for factory reset (requires a tool).

Figure 3: Detailed product diagram highlighting the display, buttons, sensor probe, and power outlet.

Figur 4: Overview of key features including heating/refrigeration, timing, temperature calibration, memory, reset, backup memory, lock screen, backlit LCD, and high accuracy.

4. Opsætning

Follow these steps to set up your temperature controller:

1. Pakker ud: Carefully remove the temperature controller and sensor probe from its packaging.
2. Tilslut sonde: Ensure the sensor probe is securely connected to the designated port on the controller.
3. Placering: Position the sensor probe in the area where you need to monitor and control the temperature (e.g., inside a terrarium, refrigerator, or greenhouse).
4. Tænd: Plug the temperature controller into a standard 120V AC wall outlet. The display will illuminate.
5. Tilslut enhed: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the controlled outlet on the front of the thermostat.

5. Betjeningsvejledning

5.1. Switching Temperature Units (Celsius/Fahrenheit)

Sådan skifter du mellem Celsius (°C) og Fahrenheit (°F):

• Press and hold the "SET" button for approximately 2 seconds. The display will change the temperature unit.

5.2. Temperature Control Mode

This mode allows you to set a desired temperature range for heating or cooling.

1. Press the "SET" button once to enter temperature control mode.
2. Use the "UP" and "DOWN" buttons to adjust the "Start Temperature" (ON).
3. Press "SET" again to move to the "Stop Temperature" (OFF).
4. Use the "UP" and "DOWN" buttons to adjust the "Stop Temperature".
5. Press "SET" once more to confirm and exit the setting.

Opvarmning: If "Start Temperature" is mindre end "Stop Temperature", the device will operate in heating mode. The connected device will turn on when the temperature drops below the Start Temperature and turn off when it reaches the Stop Temperature.

Køledrift: If "Start Temperature" is større end "Stop Temperature", the device will operate in cooling mode. The connected device will turn on when the temperature rises above the Start Temperature and turn off when it drops to the Stop Temperature.

Temperaturstyringsområde: -40 ° C til 120 ° C (-72 ° F til 176 ° F).

5.3. Timing Functions (F01, F02, F03, F04)

The controller offers four distinct timing modes. Press the "MODE" button to cycle through these functions (F01, F02, F03, F04).

Figure 5: Visual representation of the four timing modes (F01, F02, F03, F04) and temperature control mode.

• F01 Cycle Timer Mode: Sets a repeating ON/OFF cycle.
  • Press "MODE" until F01 is displayed.
  • Press "SET" to adjust ON time (hours and minutes).
  • Press "SET" again to adjust OFF time (hours and minutes).
  • Press "SET" to confirm.
• F02 Countdown On Mode: The device remains OFF for a set countdown period, then turns ON.
  • Press "MODE" until F02 is displayed.
  • Press "SET" to adjust the countdown ON time (hours and minutes).
  • Press "SET" to confirm.
• F03 Countdown Off Mode: The device remains ON for a set countdown period, then turns OFF.
  • Press "MODE" until F03 is displayed.
  • Press "SET" to adjust the countdown OFF time (hours and minutes).
  • Press "SET" to confirm.
• F04 Countdown On and Countdown Off Mode: The device turns ON for a set period, then OFF for another set period.
  • Press "MODE" until F04 is displayed.
  • Press "SET" to adjust the countdown ON time (hours and minutes).
  • Press "SET" again to adjust the countdown OFF time (hours and minutes).
  • Press "SET" to confirm.

Setting Range for Timing Modes: 0 to 99 hours and 59 minutes.

5.4. Temperaturkalibrering

If you need to fine-tune the temperature reading for accuracy:

• Plug in the device. Within 2 seconds of powering on, press and hold the "MODE" button for 2 seconds until "CALIBRATE" appears on the screen.
• Use the "UP" and "DOWN" buttons to adjust the temperature offset. The calibration range is -9.9°C to 9.9°C.
• Press and hold the "MODE" button for 2 seconds to save the calibration offset and exit. If you do not save, changes will not be applied.

Figure 6: Visual guide for temperature calibration by long-pressing the MODE button.

5.5. Lock Screen Protection

Sådan forhindrer du utilsigtede ændringer af indstillinger:

• Press and hold the "MODE" and "SET" buttons simultaneously for 5 seconds to lock the thermostat.
• Repeat the process (press and hold "MODE" and "SET" simultaneously for 5 seconds) to unlock the device.

5.6. Backlight Timer Setting

Sådan justerer du baggrundsbelysningens varighed:

• Press and hold the "UP" and "DOWN" buttons simultaneously for 5 seconds.
• Use "UP" and "DOWN" to select the desired backlight duration:
  • bL-0: 10 minutes
  • bL-1: 1 Hour
  • bL-2: 4 Hours
  • bL-3: 8 Hours
  • bL-4: Always On
• Press "MODE" to save the setting.

6. Vedligeholdelse

Regular maintenance ensures the longevity and accuracy of your temperature controller:

• Rensning: Tør enheden af ​​med en blød, tør klud. Brug ikke slibende rengøringsmidler, og enheden må ikke nedsænkes i vand.
• Sensorpleje: Keep the temperature sensor probe clean and free from debris. Avoid bending or damaging the probe cable.
• Opbevaring: Når enheden ikke er i brug, skal den opbevares på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Datalagring: The device has a data storage function that saves all set parameters even after power is off.

7. Fejlfinding

If you encounter issues with your MakerHawk TC816, refer to the following common problems and solutions:

8. Specifikationer

Figure 7: Detailed product dimensions in centimeters and inches.

9. Garanti og support

MakerHawk products are designed for reliability and performance. For warranty information or technical support, please contact MakerHawk customer service through their official website or the platform where you purchased the product. Please have your model number (TC816B) and purchase details ready when contacting support.

Figure 8: What is included in the package: the temperature controller, sensor probe, user guide, and packaging box.