Onforu 5-Head 70W Motion Sensor Outdoor Flood Light User Manual

1. Produktet er slutview

The Onforu 5-Head 70W Motion Sensor Outdoor Flood Light (Model BDBS70G-5) is a hardwired LED security light designed for outdoor use. It features five adjustable light heads, a built-in motion sensor, and provides 7000 lumens of daylight white illumination. The robust IP65 waterproof design ensures durability in various weather conditions, making it suitable for driveways, garages, gardens, and other outdoor areas.

2. Sikkerhedsoplysninger

• Elektrisk sikkerhed: Installation must be performed by a qualified electrician or a person with sufficient electrical knowledge. Ensure power is turned off at the circuit breaker before installation, wiring, or maintenance.
• Jording: This fixture must be properly grounded to prevent potential electrical shock.
• Voltage: Sørg for, at strømforsyningen voltage matcher armaturets krav (120 volt).
• Udendørs brug: Designed for outdoor use. Ensure all connections are sealed and waterproofed according to local electrical codes.
• Varme: LED lights can generate heat. Do not touch the light heads immediately after operation.
• Øjenbeskyttelse: Avoid looking directly into the LED light source when illuminated, as it can cause eye strain or damage.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Onforu 5-Head Motion Sensor Flood Light (x1)
• Monteringsbeslag (x1)
• Monteringsskruer og vægankre
• Trådmøtrikker (x3)
• Brugervejledning (x1)
• LED Lens (Included as part of the fixture)

4. Opsætning og installation

This flood light is designed for hardwired installation. Follow these steps carefully:

1. Sluk for strømmen: Before starting, ensure the power to the installation area is turned off at the main circuit breaker.
2. Forbered ledningsføring: Identify the Live (Black), Neutral (White), and Ground (Green/Bare Copper) wires from your electrical box.
3. Monteringsbeslag: Secure the mounting bracket to the desired surface (wall, soffit, or pillar) using the provided screws and anchors. Ensure it is firmly attached.
4. Ledningsforbindelser: Connect the fixture's wires to your household wiring using the provided wire nuts:
   • Black (Fixture) to Black (Household - Live)
   • White (Fixture) to White (Household - Neutral)
   • Green (Fixture) to Green/Bare Copper (Household - Ground)
5. Sikker armatur: Carefully tuck the wires into the junction box and attach the light fixture to the mounting bracket. Ensure a tight seal to prevent water ingress.
6. Juster lyshoveder: Once mounted, adjust the five individual light heads to cover the desired area. Each head can be rotated to direct light as needed.
7. Gendan strøm: Tænd for strømmen igen ved afbryderen.

Anbefalet installationshøjde: 6.5 - 13.1 feet (2 - 4 meters) above the ground for optimal motion detection and lighting coverage.

Figure 4.1: Hardwired Installation Diagram. This image illustrates the wiring connections (Live, Neutral, Ground) and how the fixture attaches to the mounting bracket on a wall.

Figure 4.2: Various Mounting Options. The image displays the flood light installed in three common configurations: under a soffit, on a wall, and on a pillar, demonstrating its versatility.

5. Betjeningsvejledning

The Onforu flood light is designed for automatic operation based on motion detection and ambient light levels.

• Bevægelsesaktivering: The built-in PIR motion sensor detects movement within its sensing range. When motion is detected, the light will automatically turn on for the set duration.
• Justerbare lyshoveder: The five light heads can be independently adjusted to direct light precisely where needed, providing broad and customizable illumination.

Figure 5.1: Wide Area Illumination. This image demonstrates the extensive coverage area (up to 1230 sq.ft.) provided by the adjustable 5-head design, illuminating a large backyard at night.

Figure 5.2: Motion Activated Lighting. The image illustrates the motion sensor's functionality, showing a person triggering the light within its 180-degree sensing angle and up to 72.17ft detection distance.

6. Indstillinger for bevægelsessensor

The motion sensor features adjustable controls for customization:

• Registreringsområde: Adjustable from approximately 19 feet to 72 feet (6 meters to 22 meters).
• Arbejdstilstande:
  • "+" Mode: Light will be triggered both day and night when motion is detected.
  • "-" Mode: Light will only be triggered at night when motion is detected.
• Timer: Adjustable duration for how long the light stays on after motion detection, typically from 1 to 10 minutes.

Figure 6.1: Motion Sensor Controls. This image shows the three adjustment knobs on the motion sensor for setting detection range, operating mode (day/night), and illumination duration (timer).

Figure 6.2: Flexible Light Panels and Adjustable Motion Sensor. This image highlights the design features, including the ability to adjust the angle of the five light panels and the motion sensor for optimal coverage.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din projektør.

• Rensning: Rengør lampehovederne og bevægelsessensorlinsen med jævne mellemrum med en blød klud.amp cloth to remove dirt, dust, or debris that may obstruct light output or sensor function. Do not use abrasive cleaners.
• Inspektion: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure all seals remain intact to maintain IP65 waterproof rating.
• Ingen dele, der kan serviceres af brugeren: The LED components are integrated and not user-replaceable. Do not attempt to disassemble the light heads.

Figure 7.1: IP65 Waterproof Design. This image visually confirms the light's resistance to water, snow, heat, and dust, highlighting its suitability for outdoor environments.

8. Fejlfinding

If you encounter issues with your Onforu flood light, refer to the following common troubleshooting steps:

• Lyset tændes ikke:
  • Kontroller om strømforsyningen er aktiv ved afbryderen.
  • Kontroller, at alle ledningsforbindelser er sikre og korrekte.
  • Ensure the motion sensor is set to the correct working mode (e.g., "+" for day/night, "-" for night only).
  • Adjust the ambient light sensor sensitivity if the light is not activating in low light conditions.
• Lyset lyser konstant:
  • Check if the motion sensor is detecting constant movement (e.g., tree branches, pets). Adjust the sensor angle or sensitivity.
  • Ensure the timer setting is not set to its maximum duration or a continuous mode if available.
• Light Flashes or Cycles On/Off:
  • This could indicate an unstable power supply or a faulty connection. Recheck wiring.
  • Sørg for, at bevægelsessensorens linse er ren og uhindret.
• Bevægelsessensor registrerer ikke:
  • Increase the detection range setting on the sensor.
  • Ensure the sensor is not obstructed and is facing the desired detection area.
  • Verify the installation height is within the recommended range for optimal detection.

If these steps do not resolve the issue, please contact Onforu customer support for further assistance.

9. Specifikationer

Figur 9.1: Produktmål. Dette billede giver en detaljeret view of the flood light with its key measurements in both millimeters and inches.

10. Garanti og support

This Onforu product comes with a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Onforu webwebsted.

For technical support, troubleshooting assistance, or any questions regarding your product, please contact Onforu customer service. Contact information can typically be found on the product packaging or the official Onforu webwebsted.