Temank 10000W Solar Inverter 10K Instruction Manual

1. Produktet er slutview

The Temank 10000W Solar Inverter 10K is a multi-functional split-phase pure sine wave power inverter designed for solar energy storage. It integrates solar energy storage, utility charging, energy storage, and AC sine wave output. This inverter supports two solar inputs and simultaneous tracking of two solar maximum power charging/carrying capacity functions. It is suitable for off-grid backup and self-use applications in homes, cabins, campers, RVs, trailers, and boats.

Key features include compatibility with various battery types (AGM, Gel, Lead acid, Lithium-ion, LiFePO4) and batteryless operation. It offers 360° protection against short circuits, over-current, over/under voltage, overload, and backfill. The inverter can output 110V/220V with a single unit, supporting four different voltage levels per phase (100Vac, 105Vac, 110Vac, and 120Vac).

2. Hvad er der i æsken

• Temank 10000W Solar Inverter 10K
• 2AWG battery cable
• 10AWG solar extension cable
• Brugsanvisning
• Cable Lugs and screws

Image: Contents of the Temank 10K Solar Inverter box, showing the inverter unit, battery cables, solar cables, user manual, and mounting hardware.

3. Sikkerhedsoplysninger

Please read this manual carefully before installation and operation. Failure to follow instructions may result in electric shock, fire, or other serious injury. Keep this manual for future reference.

• Installation skal udføres af kvalificeret personale.
• Ensure all wiring is correctly sized and properly connected.
• Forsøg ikke at reparere inverteren selv. Kontakt kvalificeret servicepersonale.
• Sørg for korrekt ventilation omkring inverteren for at forhindre overophedning.
• Always disconnect all power sources before performing any maintenance or wiring.

4. Opsætning og installation

The Temank 10K Solar Inverter is designed for easy installation. Follow these steps for proper setup.

4.1 Montering af inverteren

Mount the inverter on a sturdy, non-flammable surface in a well-ventilated area. Ensure sufficient clearance around the unit for airflow.

Image: The Temank 10000W Solar Inverter 10K unit, showcasing its design and size, typically mounted vertically.

4.2 Ledningsforbindelser

Connect the battery, solar panels (PV array), and AC loads to the inverter. Ensure correct polarity and secure connections for all cables.

Batteriforbindelse

The inverter is compatible with 48V AGM, Gel, Lead acid, Lithium-ion, and LiFePO4 batteries. It also supports batteryless operation. Use the provided 2AWG battery cables for connection.

Image: Visual representation of the inverter's compatibility with different 48V battery types, including AGM, Gel, FLD, LI, SLD, and USER-defined options.

Solar Panel (PV Array) Connection

Connect your solar panels to the PV input terminals. The inverter supports two solar inputs with a maximum PV input power of 11KW (5500W*2) and a maximum PV input voltage of 500Vdc. Use the provided 10AWG solar extension cables.

AC Load Connection (Split-Phase/Single-Phase)

The inverter supports both split-phase and single-phase pure sine wave output. It can output 110V/220V with just one unit. Refer to the diagrams below for wiring configurations.

Image: Detailed wiring diagrams illustrating connections for both split-phase (L1+L2+N+PE) and single-phase (L1+N+PE) output modes, including solar panels, batteries, and household loads. Important notices regarding PV panel open circuit voltage are included.

4.3 Video Guides for Wiring

5. Betjeningsvejledning

The inverter features an intuitive operation and display panel for monitoring and configuration.

5.1 Betjenings- og displaypanel

Image: Close-up of the inverter's LCD screen and control buttons (ESC, UP, DOWN, ENTER), showing various indicators for PV, battery, utility, and load status, along with menu navigation options.

5.2 Basic Settings and Modes

The inverter offers four charging modes and two output modes, allowing flexible configuration based on your needs. You can set charging modes and time according to your requirements.

The inverter also features a power-saving mode. When the load power is below 50W, the inverter output will switch off after a 5-minute delay. If the load is more than 50W, the inverter automatically restarts.

Image: A visual explanation of the Power Saving Mode, detailing how the inverter manages output based on load power to conserve energy.

5.3 Monitoring via SmartESS App

Monitor and control your inverter remotely using the SmartESS App, available on the App Store and Google Play. A Wi-Fi/GPRS data acquisition module needs to be purchased separately for this functionality.

Image: Depicts the SmartESS mobile application interface for remote monitoring and control of the solar inverter, showing download options and the optional Wi-Fi module.

6. Tekniske specifikationer

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din inverter.

• Hold inverteren ren og fri for støv og snavs.
• Sørg for, at alle forbindelser er tætte og fri for korrosion.
• Check ventilation openings regularly to ensure they are not blocked.
• Periodically inspect cables for any signs of wear or damage.

8. Fejlfinding

Hvis du støder på problemer med din inverter, kan du se følgende almindelige fejlfindingstips:

• Ingen strømudgang: Check battery connections, AC input breaker, and inverter's ON/OFF switch.
• Overbelastningsfejl: Reduce the connected load. The inverter provides overload protection.
• Batteri oplades ikke: Verify solar panel connections, PV input voltage, and charging current settings. Check battery type settings.
• Inverteren tænder ikke: Sørg for tilstrækkelig batterivolumentage and proper AC input (if applicable).

For persistent issues, consult the detailed troubleshooting section in the user manual or contact Temank customer support.

9. Garanti og support

The Temank 10000W Solar Inverter 10K comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, service, or warranty claims, please contact Temank customer service through their official channels. Provide your product model number (10K) and purchase details for efficient assistance.