Stayer 36V L20 Cordless Brush Cutter

1. Introduktion

This manual provides essential information for the safe and effective use of your Stayer 36V L20 Cordless Brush Cutter. Please read these instructions carefully before operating the tool to ensure proper assembly, operation, and maintenance. Keep this manual for future reference.

Generelle sikkerhedsadvarsler

• Brug altid passende personlige værnemidler (PPE), herunder øjenbeskyttelse, høreværn, handsker og robust fodtøj.
• Sørg for, at arbejdsområdet er frit for tilskuere, børn og kæledyr.
• Undersøg værktøjet for skader eller løse dele før hver brug. Brug ikke et beskadiget værktøj.
• Remove the battery pack when not in use, before cleaning, or when performing maintenance.
• Brug ikke buskrydderen i våde forhold eller i nærheden af ​​brandfarlige væsker eller gasser.

2. Produktet er slutview

The Stayer 36V L20 is a powerful cordless brush cutter designed for trimming grass, weeds, and light brush. It features a brushless motor for efficiency and durability, powered by two 18V Li-ion batteries for a total of 36V.

Figure 1: Stayer 36V L20 Cordless Brush Cutter. Key components include the dual battery insertion point, safety switch, 180° rotatable double handle, adjustable head, and support harness.

Nøglefunktioner:

• Dobbelt batterisystem: Utilizes two 18V batteries for a combined 36V power output, ensuring extended runtime and consistent performance.
• Børsteløs motor: Provides increased efficiency, longer motor life, and reduced maintenance.
• Nylon Line and Disc Cutting: Equipped for both nylon line trimming and disc cutting for versatile use on various types of vegetation.
• 2-Second Reverse Rotation: A quick reverse spin system helps clear tangled grass and debris from the cutting mechanism.
• Electronic Speed Regulator: Allows adjustment of cutting speed to match the task at hand.
• Lightweight Aluminum Structure: Ensures maximum lightness and durability of the tool.
• Dobbelt sikkerhedsafbryder: Prevents unintentional activation and enhances user safety.
• Automatic Nylon Line Feed: Simplifies line management during operation.
• 180° Rotatable Double Handle: Ergonomic design for comfortable use and adaptability to different working positions.
• Support Harness: Distributes tool weight for comfortable handling during prolonged use.
• STAYER Li-ion HIGH-TECH Battery: Features protection against overcharge, discharge, overheating, and short circuits, with an LED charge indicator.
• LED arbejdsområde lys: Oplyser skæreområdet for forbedret udsyn.

3. Opsætning

3.1. Batteriopladning

1. Tilslut opladeren til en passende stikkontakt.
2. Insert the Stayer 18V Li-ion batteries into the charger. Ensure they are seated correctly.
3. Allow the batteries to charge fully. The LED indicator on the charger will show the charging status.
4. Når batterierne er fuldt opladet, skal de tages ud af opladeren.

3.2. Tool Assembly

While the main unit comes largely pre-assembled, some components may require attachment.

• Håndtag vedhæftning: Secure the double handle to the main shaft using the provided fasteners. Ensure it is positioned comfortably for your height and working style.
• Installation af beskyttelse: Attach the protective guard over the cutting head. This guard is crucial for user safety and must always be in place during operation.
• Seleforbindelse: Attach the support harness to the designated point on the brush cutter shaft. Adjust the harness for a comfortable and balanced fit, distributing the tool's weight evenly.

3.3. Batteriindsættelse

1. Ensure the brush cutter is switched off and the safety switch is engaged.
2. Insert two fully charged 18V Li-ion batteries into the dual battery slots on the tool. Push firmly until they click into place.
3. Verify that the batteries are securely seated before use.

4. Betjeningsvejledning

4.1. Start og stop af værktøjet

1. Sørg for, at alle sikkerhedsforanstaltninger følges, og at der bæres personlige værnemidler.
2. To start, engage the double safety switch and then press the trigger. The tool will begin operating.
3. To stop, release the trigger. The cutting head will cease rotation.

4.2. Hastighedskontrol

Use the electronic speed regulator to adjust the cutting speed. Lower speeds are suitable for light trimming, while higher speeds are for denser vegetation.

4.3. Skæreteknikker

• Nylon Line Trimming: Hold the brush cutter at a slight angle to the ground. Use a sweeping motion to cut grass and light weeds. The automatic line feed system will advance the line as needed.
• Disc Cutting: For thicker brush and small saplings, use the cutting disc. Approach the material slowly and maintain a firm grip. Avoid hitting hard objects like rocks or metal.
• Omvendt rotation: If the cutting head becomes clogged with grass or debris, activate the 2-second reverse rotation system to clear it. Refer to the tool's specific controls for this function.

4.4. Using the Support Harness

Adjust the harness so the tool is balanced and comfortable. This reduces fatigue during extended use and allows for better control.

5. Vedligeholdelse

Regular maintenance ensures the longevity and safe operation of your brush cutter. Always remove the batteries before performing any maintenance.

5.1. Rensning

• After each use, clean the cutting head, guard, and motor housing to remove grass, dirt, and debris.
• Use a dry cloth or soft brush. Do not use water or cleaning solvents that could damage the tool.
• Sørg for, at ventilationsåbningerne er fri for blokeringer for at forhindre overophedning.

5.2. Nylon Line Replacement

When the nylon line becomes too short or breaks, replace it according to the instructions provided with the cutting head or refer to the manufacturer's guidelines. Use only recommended line types and diameters.

5.3. Batteripleje og -opbevaring

• Opbevar batterier et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Opbevar ikke helt afladede batterier i længere perioder. Oplad dem med jævne mellemrum, hvis de ikke er i brug.
• Do not expose batteries to water or impact.

5.4. Tool Storage

Store the brush cutter in a secure, dry place, out of reach of children. Ensure the batteries are removed before storage.

6. Fejlfinding

This section addresses common issues you might encounter with your Stayer 36V L20 Brush Cutter.

7. Specifikationer

Technical data for the Stayer 36V L20 Cordless Brush Cutter (Model 1.2824).