MokerLink udendørs 10-ports Gigabit PoE-switch brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your MokerLink Outdoor 10 Port Gigabit PoE Switch. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

Image 1.1: The MokerLink Outdoor 10 Port Gigabit PoE Switch, designed for outdoor use, shown connected to surveillance cameras. It features full Gigabit ports, IEEE802.3af/at support, plug & play functionality, SFP fiber connectivity, wall/pole installation options, and waterproof design.

2. Produktfunktioner

• 10 Gigabit-porte: Equipped with 8 Gigabit PoE ports and 2 Gigabit SFP ports, all supporting 1000Mbps data rates for high-performance data exchange. The 2 SFP ports (modules not included) allow for optical fiber connections, suitable for long-distance outdoor transmission.
• IEEE802.3af/at PoE Support: Features a built-in power supply with a maximum output of 96W. Ports 1-8 support IEEE 802.3af/at standards, providing up to 30W per port. Note: This switch does not support passive 24V PoE.
• Plug & Play-betjening: Includes a power cord with a wiring terminal for direct connection to the switch's power input, designed with anti-reverse connection protection. Network cables connect directly to PoE devices, with automatic detection, requiring no configuration.
• Udendørs vejrbestandigt design: Constructed with an industrial-grade ABS polymer material shell. All power and cable interfaces are protected within the shell, offering enhanced waterproof, dustproof, and snowproof capabilities, making it suitable for outdoor environments and complex indoor settings like warehouses or attics.
• Fleksibel installation: LED indicator lights on the front panel provide clear operational status. Pendants on the back support both wall and pole mounting options.

Image 2.1: Diagram showing the PoE+ IEEE802.3af/at compliance, automatically detecting and providing power to devices. It highlights 30W per PoE port, a 96W total power budget, and 48V PoE port output voltage, connecting to IP cameras, wireless APs, and IP phones, while also showing non-PoE devices like routers and computers.

Image 2.2: Illustration of the weather-resistant capabilities of the PoE switch, including lightning protection, dustproof design, IP65 waterproof rating, and resilience against sun exposure and snow, making it suitable for various outdoor conditions.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke. Hvis der mangler eller er beskadigede varer, bedes du kontakte kundesupport.

• MokerLink Outdoor PoE Switch x 1
• Power Cable with Terminal x 1
• Brugervejledning x 1
• Vægmonteringssæt x 1

Image 3.1: The complete package contents, showing the MokerLink Ethernet Switch, power cable with terminal, user manual, and wall mount kit.

4. Opsætning og installation

4.1 Monteringsmuligheder

The switch supports both wall and pole mounting. Choose the appropriate method for your installation environment.

Image 4.1: Illustration of the flexible mounting options, demonstrating how the switch can be installed on a wall or a pole using the provided mounting kit.

4.2 Strømtilslutning

Connect the provided power cable to the terminal block connector on the switch. Ensure correct polarity (L, N, Ground) and secure the connections. The wire gauge for the terminal block should be in the range of 12-24 AWG.

4.3 Netværksforbindelser

Connect your network devices (e.g., IP cameras, wireless access points) to the 8 Gigabit PoE RJ45 ports (1-8). For uplink or long-distance connections, use the 2 Gigabit SFP ports (SFP modules not included).

Billede 4.2: Detaljeret view of the switch's ports, including 8 x 10/100/1000 Mbps RJ45 Ethernet Ports and 2 x 1Gbps SFP Ports. The terminal block connector for power input is also shown with its wiring diagram (L, NC, N, NC, Ground) and recommended wire gauge (12-24 AWG).

5. Betjeningsvejledning

5.1 Tænd

Once all connections are secure, apply power to the switch. The switch will automatically detect and power connected PoE devices.

5.2 LED-indikatorer

The front panel features LED indicators to display the operating status of the switch:

• PWR (Power indicator):
  • Tændt: Tændt
  • Slukket: Slukket
• Link/Act indicator (1-10):
  • On: Link connection normal
  • Fra: Link fra
  • Blinker: Dataoverførsel
• PoE Indicator (1-8):
  • On: Power device connected
  • Off: No powered or no PoE device

Image 5.1: A close-up of the LED indicator panel on the MokerLink switch, showing PWR, Link, and PoE status lights for each port.

6. Specifikationer

7. Fejlfinding

• Ingen strøm: Ensure the power cable is correctly connected to the terminal block and the power source. Check the PWR LED indicator. If it's off, verify the power supply.
• Intet link/aktivitet: If the Link/Act LED is off for a connected device, check the network cable connection at both ends. Ensure the connected device is powered on and functioning correctly. Try a different cable or port.
• PoE-enhed tænder ikke: Check the PoE Indicator for the specific port. If it's off, ensure the connected device is a PoE-compatible device (IEEE 802.3af/at). Verify the device's power requirements do not exceed 30W per port or the total 96W budget. This switch does not support passive 24V PoE.
• Langsom netværkshastighed: Ensure all connected devices and cables support Gigabit Ethernet (1000Mbps). Check for excessive network traffic or faulty cables.
• Intermitterende forbindelse: Check all cable connections for looseness or damage. Ensure the switch is installed in a stable environment and not subject to extreme vibrations.

8. Vedligeholdelse

• Rensning: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure all ports are free from dust and debris.
• Kabelinspektion: Regularly inspect all connected network and power cables for signs of wear, damage, or corrosion, especially in outdoor installations. Replace damaged cables immediately.
• Miljøtjek: Ensure the switch's operating environment remains within the specified temperature range (up to 60°C). While weatherproof, avoid prolonged exposure to direct, intense sunlight or extreme weather conditions if possible, to extend product lifespan.
• Firmwareopdateringer: Tjek den officielle MokerLink-side webTjek regelmæssigt webstedet for tilgængelige firmwareopdateringer. Følg vejledningen, der følger med opdateringen, omhyggeligt.

9. Garanti og support

9.1 Garantioplysninger

The MokerLink Outdoor 10 Port Gigabit PoE Switch comes with a 1 års garanti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller naturkatastrofer.

9.2 Teknisk support

For technical assistance, troubleshooting, or warranty claims, please contact MokerLink customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (POE-G082GSO) and purchase details ready.