AXA Blueline Rear Ebike Light - 80mm Cable

Produkt overview

The AXA Blueline Ebike Taillight is engineered for modern e-bikes, offering a compact and slim design that integrates seamlessly with most luggage carriers. It features advanced Lightguide technology to ensure optimal light distribution for enhanced safety. Side lighting increases visibility to crossing traffic, making the rider more noticeable from various angles. This rear light is compatible with 6-12V E-bike batteries and is built to be shock and water resistant, ensuring durability in various conditions. It includes an integrated reflector and is visible from up to 600 meters away.

Figur 1: Forside view of the AXA Blueline Rear Ebike Light, showing its red reflector and clear top section for illumination.

Opsætning og installation

Proper installation ensures optimal performance and safety. Follow these steps carefully:

1. Kompatibilitetskontrol: Ensure your e-bike battery system provides 6-12V DC power. The Blueline taillight is designed specifically for this voltage rækkevidde.
2. Monteringssted: The taillight is designed for rear mounting, typically on a luggage carrier. It has a standard mounting distance of 50 mm between the mounting points.
3. Sikker montering: Attach the taillight securely to the designated mounting points on your e-bike's luggage carrier using appropriate screws and hardware (not included unless specified by your e-bike manufacturer). Ensure the light is firmly in place and does not wobble.
4. Elektrisk tilslutning: Connect the taillight's cable to your e-bike's 6-12V power supply. Refer to your e-bike's manual for specific wiring instructions. Ensure connections are secure and insulated to prevent short circuits and water ingress.
5. Kabelstyring: Route the cable neatly along the bike frame, securing it with cable ties to prevent snagging or damage.
6. Funktionstest: After installation, turn on your e-bike's power to verify that the taillight illuminates correctly. Check for consistent brightness and proper function of the integrated reflector.

Betjeningsvejledning

The AXA Blueline Rear Ebike Light operates in conjunction with your e-bike's electrical system.

• Tænd/sluk: The taillight will typically turn on automatically when your e-bike's electrical system is activated (e.g., when the e-bike is turned on or its lights are switched on via the e-bike's control panel). It will turn off when the e-bike's power is disengaged.
• Sigtbarhed: The light is designed to be visible from the rear and sides, enhancing your safety in traffic. The integrated reflector provides passive visibility even when the light is not active.
• Lysindstillinger: This model features 2 settings. These typically refer to on/off states or potentially different brightness levels, depending on your e-bike's control system. Consult your e-bike's manual for how to cycle through these settings if applicable.

Vedligeholdelse og pleje

To ensure the longevity and optimal performance of your AXA Blueline taillight, follow these maintenance guidelines:

• Rensning: Rengør regelmæssigt linsen og huset med en blød, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige plastikken.
• Inspektion: Periodically check the mounting screws for tightness and the electrical connections for any signs of wear or corrosion.
• Vand- og stødmodstand: The light is designed to be water and shock resistant. However, avoid submerging it in water or subjecting it to severe impacts, as this could compromise its integrity.
• Opbevaring: If storing your e-bike for an extended period, ensure the taillight is clean and dry.

Fejlfinding

If you encounter issues with your AXA Blueline Rear Ebike Light, consider the following:

• Lyset lyser ikke:
  • Check the e-bike's power supply: Ensure the e-bike is turned on and its lighting system is activated.
  • Verify electrical connections: Inspect the wiring for loose connections, corrosion, or damage. Re-secure or repair as necessary.
  • Tjek voltage: Confirm that the e-bike's output voltage to the light is within the 6-12V range.
• Svagt eller flimrende lys:
  • Inspect wiring for partial shorts or loose connections.
  • Ensure the e-bike battery is adequately charged.
• Fysisk skade: If the light housing or lens is cracked, its water resistance may be compromised. Replacement may be necessary.

For persistent issues, contact AXA customer support or a qualified e-bike technician.

Specifikationer

Garanti og support

AXA products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty documentation provided with your purchase or visit the official AXA website. For technical support, replacement parts, or further assistance, please contact AXA customer service through their official channels.

Online ressourcer: For the most up-to-date information, product registration, and frequently asked questions, please visit the official AXA webwebsted.