PIX-LINK AC28 Dual-Band WiFi Extender Instruction Manual

Produkt overview

The PIX-LINK AC28 WiFi Extender is designed to expand your existing wireless network coverage, eliminate Wi-Fi dead zones, and provide stable, high-speed internet access throughout your home or outdoor areas. It supports dual-band frequencies (2.4GHz and 5.8GHz) for versatile connectivity and improved performance.

Billede: Forside view of the PIX-LINK AC28 WiFi Extender, showing its compact white design and two external antennas.

Nøglefunktioner

• Udvidet dækning: Boosts WiFi signal to cover up to 10000 sq ft, penetrating walls and floors for comprehensive coverage.
• High-Speed Dual-Band: Offers up to 300Mbps on 2.4GHz and 865Mbps on 5.8GHz for a combined 1200Mbps.
• Omfattende enhedssupport: Connects over 200 devices, including IP cameras, game consoles, tablets, and printers, without affecting speed.
• Multiple Work Modes: Supports Repeater mode (extending existing WiFi) and AP mode (creating a new WiFi hotspot from a wired connection).
• Sikkert netværk: Compatible with WEP and WPA/WPA2 wireless security protocols to protect your home network.
• Easy Installation & Heat Dissipation: Simple setup process and efficient heat dissipation design for stable 24-hour operation.

Produktkomponenter

Image: Diagram of the PIX-LINK AC28 WiFi Extender highlighting its components: 4 High-Gain Antennas, Power/Internet Status/Wi-Fi Indicator LED, Vents, WAN/LAN Port, and Reset (8s) / WPS (3s) button.

• 4 højforstærkede antenner: For enhanced signal reception and transmission.
• Power/Internet Status/Wi-Fi Indicator: LED-lys, der angiver enhedens status.
• Vents: Designet til effektiv varmeafledning.
• WAN/LAN-port: For wired connections in AP mode or connecting wired devices.
• Reset / WPS Button: Used for resetting the device or quick WPS setup.

Opsætning og installation

Follow these steps to set up your PIX-LINK AC28 WiFi Extender. For a visual guide, please refer to the official installation video below.

Trin 1: Tænd

Connect the extender to a power socket in close proximity to your router. The indicator light will turn on.

Step 2: Connect to Extender's WiFi

On your mobile device or computer, connect to either "PIX-LINK-2.4G" or "PIX-LINK-5.8G" WiFi network. The default password is 12345678.

Step 3: Access Setup Page

Åbn a web browser og indtast 192.168.7.1 in the address bar to access the login page. The default login password is admin.

Step 4: Configure Repeater Mode

Once logged in, select "Repeater Mode". Choose the SSID (WiFi network name) you wish to extend from the scan list. Enter the password for your original WiFi network.

Note: The password for the first-time setup needs to be consistent with the password of your original WiFi signal source.

Step 5: Reconnect to Extended WiFi

After successful configuration, the extender will create new extended WiFi networks (e.g., "YourNetworkName-EXT"). Return to your device's WiFi settings and connect to the new extended network.

Officiel installationsvideo

Video: A step-by-step guide demonstrating the installation and setup process for the PIX-LINK AC28 WiFi Extender, including connecting to power, accessing the setup page, and configuring repeater mode.

Driftstilstande

The PIX-LINK AC28 supports multiple operating modes to suit various network requirements.

Image: Diagram illustrating the three operating modes: Wireless AP Mode, Wireless Repeater Mode, and Wireless to Wired Mode.

1. Wireless Repeater Mode

This mode extends the range of your existing wireless network. The extender receives the WiFi signal from your main router and re-broadcasts it, effectively expanding coverage to dead zones. This is the most common use case for a WiFi extender.

2. Wireless AP (Access Point) Mode

In AP mode, the extender connects to your router via an Ethernet cable and transforms your wired network connection into a wireless one. This is useful for adding WiFi capability to a wired-only network or creating a new WiFi hotspot.

3. Wireless to Wired Mode (Client Mode)

This mode allows you to connect a wired-only device (like a desktop computer, smart TV, or game console) to your wireless network. The extender receives the WiFi signal and provides an Ethernet port for the wired device.

Avancerede indstillinger

Til view or modify login passwords, WiFi extender passwords, SSID names, or other device parameters, connect to the extended WiFi network and enter setup.pix-link.net in your browser to access the settings page.

From the settings page, you can access various options such as:

• Systemstatus
• System Mode (to switch between Repeater/AP)
• Netværksindstilling
• 2.4G trådløs indstilling
• 5.8G trådløs indstilling
• Trådløs tidsplan
• System Management (for password changes, firmware upgrades, etc.)

Fejlfinding

If you encounter issues with your PIX-LINK AC28 WiFi Extender, refer to the following common problems and solutions.

Status for indikatorlys

• Solid blåt lys: Good relay signal and wireless network is available.
• Fast Flashing Blue Light: WPS is enabled. To use this mode, both the repeater and router need to press the WPS button simultaneously.
• Konstant rødt lys: Weak signal, but wireless network is available. Try relocating the extender closer to your main router.
• Langsomt blinkende rødt lys: Repeater/AP has connected to upstream but the network is not available. Check your main router's internet connection.
• Hurtigt blinkende rødt lys: Indicates a need to reset to factory settings.
• Alternating Red and Blue Flashing Lights: Repeater failed/AP is not connected to the network cable.

Generelle tip til fejlfinding

• Kan ikke få adgang til opsætningssiden (192.168.7.1): Ensure your device is connected to the extender's WiFi (PIX-LINK-2.4G or PIX-LINK-5.8G) and not your main router's WiFi. Try clearing your browser's cache or using a different browser.
• No Internet After Setup: Verify that the password entered for your main router's WiFi during setup is correct. Ensure your main router has an active internet connection.
• Weak Signal Even with Extender: Relocate the extender to a position halfway between your router and the dead zone. Avoid placing it near large metal objects, microwaves, or other sources of interference.
• Hyppige afbrydelser: Check for firmware updates on the PIX-LINK website. Ensure the extender has adequate ventilation to prevent overheating.
• Nulstilling til fabriksindstillinger: If all else fails, press and hold the Reset button for 8 seconds until the indicator light changes, then release. This will revert the extender to its default settings, and you will need to perform the setup process again.

Specifikationer

Sikkerhedsoplysninger

• Do not expose the device to high temperatures or humid environments.
• Undgå at placere enheden i nærheden af ​​stærke elektromagnetiske felter.
• Forsøg ikke selv at adskille eller reparere enheden.
• Brug kun den medfølgende eller anbefalede strømadapter fra producenten.
• Opbevar enheden utilgængeligt for børn.
• Sørg for korrekt ventilation for at forhindre overophedning.

Garanti og support

For garantioplysninger og teknisk support henvises til den officielle PIX-LINK website or contact their customer service. You may also find additional resources and FAQs on the product support page.

Online ressourcer:

• PIX-LINK Officiel Webwebsted
• Brugervejledning (PDF)