Casio Wave Ceptor Illuminator Multiband-ur WV-200R-5ACF Brugermanual

Indledning

This manual provides detailed instructions for the operation and maintenance of your Casio Wave Ceptor Illuminator Multi Band Watch, model WV-200R-5ACF. Please read this manual carefully to ensure proper use and to fully utilize all features of your watch.

Image: Casio Wave Ceptor Illuminator Multi Band Watch WV-200R-5ACF Beige. This image displays the watch face and strap, highlighting its digital display and overall design.

Opsætning

1. Initial Time Setting (Atomic Timekeeping)

Your watch is equipped with Multi Band 6 atomic timekeeping, which automatically receives time calibration signals from six transmission stations around the world. This ensures accurate time display.

• Ensure the watch is exposed to an open area, away from metal objects or electronic devices that may interfere with signal reception.
• The watch will attempt to receive the calibration signal automatically between midnight and 5:00 AM daily.
• To manually initiate reception, refer to the "Time Calibration Signal Reception" section in the detailed module manual (available on the Casio webwebsted).

2. Manuel indstilling af tid og dato

If atomic timekeeping is not available or desired, you can set the time and date manually.

1. I tidsvisningstilstand skal du trykke på og holde TILPASSE button (usually top-left) until the city code starts flashing.
2. Brug MODE button (usually bottom-left) to cycle through settings: City Code, DST (Daylight Saving Time), 12/24-hour format, Seconds, Hour, Minute, Year, Month, Day.
3. Brug SØGE og BAGSIDE buttons (usually top-right and bottom-right) to change the flashing values.
4. Når alle indstillinger er korrekte, skal du trykke på TILPASSE knappen igen for at forlade indstillingstilstanden.

3. World Time Setup

The watch can display the current time in 29 different time zones (48 cities).

• Enter the World Time Mode by pressing the MODE knap.
• Brug SØGE og BAGSIDE buttons to scroll through the available city codes.
• To toggle Daylight Saving Time (DST) for a specific city, press the TILPASSE button while the city code is displayed.

Betjening af uret

1. Tilstandsnavigation

Tryk på MODE button (bottom-left) to cycle through the different modes:

• Tidsvisningstilstand: Viser aktuel tid, dato og ugedag.
• Verdenstidstilstand: Viser den aktuelle tid i forskellige byer rundt om i verden.
• Alarmtilstand: Indstil op til 5 daglige alarmer og en timerurly tidssignal.
• Stopurstilstand: Måler forløbet tid, mellemtider og to målgange.
• Timertilstand: Countdown timer with a range of 1 minute to 24 hours.

2. Using the Illuminator

The watch features an Illuminator for visibility in low-light conditions.

• Tryk på LYS button (usually top-right or front center) to illuminate the display.
• The illumination duration can be adjusted in the settings.

3. Vandtæthed (200M)

Your watch is water resistant to 200 meters (20 BAR), making it suitable for swimming, showering, and snorkeling.

• Betjen ikke knapperne, mens uret er vådt eller nedsænket i vandet.
• Avoid exposing the watch to hot water or steam, as this can compromise the water resistance seals.
• Efter udsættelse for saltvand, skyl uret med ferskvand og tør det af.

Opretholdelse

1. Rengøring af dit ur

Regelmæssig rengøring hjælper med at bevare dit urs udseende og levetid.

• Wipe the watch case and band with a soft, dry cloth.
• For resin bands, you can use a mild soap solution and a soft brush, then rinse thoroughly with water and dry.
• Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.

2. Udskiftning af batteri

The watch is powered by a battery. When the display becomes dim or the watch stops functioning, it may be time for a battery replacement.

• Battery replacement should ideally be performed by an authorized Casio service center to ensure proper sealing and water resistance.
• Attempting to replace the battery yourself may void the warranty and compromise the watch's water resistance.

Fejlfinding

• Time is incorrect or not syncing:

  Ensure the watch is in an area with good signal reception, away from strong magnetic fields or electronic interference. Verify your home city setting is correct. If automatic reception fails, try manual time setting.

• Skærmen er svag eller tom:

  This may indicate a low battery. Contact an authorized service center for battery replacement.

• Knapperne reagerer ikke:

  Ensure the watch is not in a locked mode (if applicable, refer to the full module manual). If the watch was recently exposed to water, ensure it is completely dry. If the issue persists, seek professional service.

Specifikationer

Garantioplysninger

Your Casio WV-200R-5ACF watch comes with a Limited Warranty. The specific terms and duration of the warranty are provided with your purchase in the included "Warranty Information" document.

Please retain your proof of purchase for warranty claims. The warranty typically covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.

For detailed warranty terms and conditions, please refer to the official Casio webwebstedet eller garantikortet, der er inkluderet i din produktemballage.

Støtte

For further assistance, detailed module instructions, or service inquiries, please visit the official Casio support webwebsted.

• Officiel Casio Webwebsted: www.casio.com
• Modulnummer: Refer to the back of your watch or the included manual for the specific module number (e.g., 3134, 3135) to find the exact digital manual.
• Inkluderede komponenter: Your product package includes a User Manual and Warranty Information.