1. Introduktion
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your AURA Livac 114R Suction Machine. Please read this manual thoroughly before using the appliance and retain it for future reference.
The AURA Livac 114R is a versatile cleaning appliance designed for dust and water suction, carpet washing, and blower functions, offering powerful cleaning capabilities for various household and commercial needs.
2. Sikkerhedsinstruktioner
ADVARSEL: For at mindske risikoen for brand, elektrisk stød eller personskade skal du læse og følge alle instruktioner omhyggeligt.
- Tag altid netledningen ud af stikkontakten før service.
- Do not use the appliance on wet surfaces when operating in dry mode.
- Saml ikke brændbare eller brændbare væsker, såsom benzin, og brug ikke i områder, hvor de kan være til stede.
- Tag ikke noget op, der brænder eller ryger, såsom cigaretter, tændstikker eller varm aske.
- Hold hår, løstsiddende tøj, fingre og alle dele af kroppen væk fra åbninger og bevægelige dele.
- Brug kun som beskrevet i denne manual. Brug kun producentens anbefalede tilbehør.
- Må ikke anvendes med en beskadiget ledning eller stik. Hvis apparatet ikke fungerer som det skal, er blevet tabt, beskadiget, efterladt udendørs eller tabt i vand, skal det returneres til et servicecenter.
- Undlad at trække eller bære i snoren, bruge snoren som håndtag, lukke en dør på snoren eller trække snoren rundt om skarpe kanter eller hjørner. Kør ikke apparatet over ledningen. Hold ledningen væk fra opvarmede overflader.
- Tag ikke stikket ud ved at trække i ledningen. For at tage stikket ud skal du tage fat i stikket, ikke i ledningen.
- Håndter ikke stikket eller apparatet med våde hænder.
- Sluk for alle knapper, før du trækker stikket ud.
3. Produktkomponenter
The AURA Livac 114R Suction Machine includes the following main components:
- Main Unit (Motor housing, dust/water container)
- Fleksibel slange
- Forlængerstav
- Tæppevaskedyse
- Støvfilter
- Water Tank (for carpet washing solution)
- Strømledning
Figur 1: Overview of the AURA Livac 114R Suction Machine, showing the main unit, flexible hose, and carpet washing nozzle attachment.
4. Opsætning og montering
4.1 Udpakning
Carefully remove all components from the packaging. Check for any damage during transit. Ensure all parts listed in Section 3 are present.
4.2 Attaching the Flexible Hose
- Locate the suction inlet on the main unit.
- Insert the flexible hose connector firmly into the inlet until it clicks into place.
4.3 Attaching Extension Wands and Nozzles
- Connect the desired number of extension wands to the end of the flexible hose.
- Attach the appropriate nozzle (e.g., carpet washing nozzle, crevice tool, brush) to the end of the extension wand.
4.4 Preparing for Carpet Washing
- Open the extra basin (3.5 L capacity) for the cleaning solution.
- Udfyld b'etasin with water and a suitable carpet cleaning solution according to the solution manufacturer's instructions. Do not overfill.
- Ensure the pump connection is secure.
5. Betjeningsvejledning
5.1 Dry Vacuuming (Dust Suction)
- Ensure the dust filter is correctly installed in the 5 L dust container.
- Connect the flexible hose and appropriate dry vacuuming nozzle.
- Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
- Press the power button (usually green or marked with 'I') to start the motor.
- Flyt dysen over overfladen, der skal rengøres.
- After use, press the power button to turn off the machine and unplug it.
5.2 Wet Vacuuming (Water Suction)
CAUTION: Remove the dust filter before wet vacuuming to prevent damage.
- Fjern støvfilteret.
- Ensure the 6 L waste basin is empty and properly secured.
- Connect the flexible hose and a suitable wet vacuuming nozzle.
- Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
- Tryk på tænd/sluk-knappen for at starte motoren.
- Vacuum up spilled liquids. Do not exceed the maximum fill line of the waste basin.
- After use, press the power button to turn off the machine and unplug it. Empty and clean the waste basin straks.
5.3 Carpet Washing Function
- Prepare the cleaning solution in the 3.5 L extra basin as described in Section 4.4.
- Attach the carpet washing nozzle and ensure the spray hose is connected.
- Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
- Press the main power button (for suction) and the pump power button (for spraying solution).
- Spray the cleaning solution onto the carpet by pressing the trigger on the nozzle.
- Immediately move the nozzle over the wet area to suction up the dirty solution.
- Work in small sections, overlapping slightly.
- After cleaning, run the machine with clean water to rinse the internal hoses and nozzle.
- Turn off both power buttons and unplug the machine. Empty and clean all basins.
5.4 Blæserfunktion
- Locate the blower outlet on the main unit (usually opposite the suction inlet).
- Attach the flexible hose to the blower outlet.
- Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
- Tryk på tænd/sluk-knappen for at aktivere blæseren.
- Direct the airflow as needed for blowing dust or drying surfaces.
- After use, press the power button to turn off the machine and unplug it.
6. Vedligeholdelse
Regular maintenance ensures optimal performance and extends the lifespan of your AURA Livac 114R.
6.1 Emptying and Cleaning the Dust/Waste Basin
- After each use, especially wet vacuuming or carpet washing, empty the 6 L waste basin.
- Skyl b'etasin thoroughly with clean water and allow it to air dry completely before reassembling.
6.2 Cleaning the Dust Filter
- For dry vacuuming, regularly check and clean the dust filter.
- Tap the filter gently to dislodge dust, or rinse with water if heavily soiled. Ensure it is completely dry before reinstallation.
- Replace the filter if it is damaged or excessively worn.
6.3 Cleaning the Extra Basin (Solution Tank)
- After carpet washing, empty any remaining cleaning solution.
- Rinse the 3.5 L extra basin with clean water to prevent residue buildup.
6.4 Cleaning Hoses and Nozzles
- Rinse all hoses and nozzles with clean water after wet use to prevent blockages and odors.
- Ensure they are dry before storage.
6.5 Opbevaring
Opbevar apparatet og dets tilbehør på et rent, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Maskinen tænder ikke. | Ingen strømforsyning. Strømkabel beskadiget. | Kontroller, om stikket er sat ordentligt i stikkontakten. Kontroller afbryderen. Do not use if cord is damaged; contact service. |
| Lav sugeevne. | Dust/waste basin fuld. Filter tilstoppet. Hose or nozzle blocked. Løse forbindelser. | Empty the dust/waste basin. Rengør eller udskift filteret. Check and clear any blockages in the hose or nozzle. Sørg for, at alle forbindelser er sikre. |
| Vand lækker fra maskinen. | Waste basin not properly sealed. Overfilled waste basin. Beskadigede tætninger. | Ensure the waste basin is correctly closed and sealed. Overskrid ikke den maksimale påfyldningslinje. Kontakt service for udskiftning af pakning. |
| Pumpen sprøjter ikke opløsning. | Opløsningsbeholder tom. Pump not activated. Sprøjtedysen er tilstoppet. | Refill the solution tank. Ensure the pump power button is pressed. Rengør sprøjtedysen. |
8. Specifikationer
- Model: Livac 114R
- Mærke: AURA
- Maks. Motoreffekt: 2000 W
- Sugekraft: 1950 mmH2O
- Voltage: 220-240 V AC
- Frekvens: 50/60 Hz
- Luftstrøm: 200 m³/t
- Sugekapacitet: 1.5 l/s
- Pumpestyrke: 26 W
- Pumpetryk: 2.5 bar
- Waste Basin Bind: 6 L
- Støvbeholderkapacitet: 5 L
- Extra Basin Volume (Solution Tank): 3.5 L
- Varens vægt: 8 kg (Package Dimensions: 54 x 50.7 x 44.7 cm; 8 kg)
- Særlige funktioner: Dry, Wet, Carpet Washing, Blower Function
9. Garanti og support
For warranty information and customer support, please refer to the warranty card included with your product or visit the official AURA webwebstedet. Behold din købskvittering som købsbevis.
For technical assistance or spare parts, contact AURA customer service through the details provided in your product documentation.
