Andoer D2 Handheld RGB LED Video Light Wand User Manual

Indledning

Tak for købetasing the Andoer D2 Handheld RGB LED Video Light Wand. This manual provides detailed instructions for the safe and effective use of your new light wand. Please read this manual thoroughly before operation and retain it for future reference.

Sikkerhedsoplysninger

• Udsæt ikke enheden for vand eller høj luftfugtighed.
• Undgå direkte øjeneksponering for lyskilden.
• Enheden må ikke skilles ad eller ændres. Reparationer bør kun udføres af autoriseret personale.
• Opbevares utilgængeligt for børn.
• Brug kun det medfølgende eller certificerede opladningskabel.
• Do not operate in environments with flammable gases or liquids.

Pakkens indhold

Kontroller venligst pakkens indhold ved åbning. Hvis der mangler eller er beskadigede dele, skal du kontakte din forhandler.

• Andoer D2 Handheld RGB LED Video Light Wand
• USB Type-C opladerkabel
• Brugervejledning (dette dokument)

Produkt overview

Familiarize yourself with the components and controls of the Andoer D2 light wand.

Billede: Overview of the Andoer D2 light wand, showing its dimensions (approximately 49.5cm / 19.5in long and 3.8cm / 1.5in diameter) and control panel. The control panel includes a Power Indicator Light, Mode Selection button, Power Switch, Brightness + button, Brightness - button, and a Charging Port.

Kontrolpanelets funktioner:

• Afbryderen: Turns the light wand on or off.
• Valg af tilstand: Cycles through different lighting modes (e.g., CCT mode, RGB color effects).
• Lysstyrke +: Increases the light brightness.
• Lysstyrke -: Decreases the light brightness.
• Strømindikatorlys: Shows the power status and charging status.
• Opladningsport (Type-C): Bruges til opladning af det interne batteri.

Opsætning

Indledende opkrævning:

Before first use, fully charge the light wand. Connect the provided USB Type-C cable to the charging port on the device and the other end to a USB power adapter (not included) or a computer USB port. The power indicator light will show charging status.

Billede: Et nærbillede view of the Type-C charging port, indicating where to connect the charging cable.

Billede: The Andoer D2 light wand shown alongside its USB Type-C charging cable, illustrating the charging setup.

Monteringsmuligheder:

The Andoer D2 light wand can be used handheld for flexible lighting or mounted for stable positioning. It features a standard 1/4-inch screw hole at the bottom.

Billede: En detaljeret view of the 1/4-inch screw hole located at the base of the light wand, demonstrating how it can be attached to a light stand or tripod for stable use. Note that the light stand/tripod is sold separately.

• Håndholdt brug: Simply hold the light wand to direct light as needed.
• Tripod/Light Stand Mounting: Screw the 1/4-inch thread at the bottom of the light wand onto a compatible tripod or light stand. Ensure it is securely fastened before use.

Betjeningsvejledning

Tænd/sluk:

Tryk og hold på Strømafbryder knappen til at tænde eller slukke lysstaven.

Justering af lysstyrke:

The light wand offers 12 levels of adjustable brightness. Use the Lysstyrke + knappen for at øge lysstyrken og Lysstyrke - knappen for at reducere den.

Billede: Illustration of the 12 levels of adjustable brightness, demonstrating the range from dim to bright light output.

Justering af farvetemperatur (CCT-tilstand):

In CCT mode, you can adjust the color temperature between 2500K (warm light), 5500K (neutral/daylight), and 8500K (cold light). Press the Valg af tilstand button to cycle to CCT mode, then use the Lysstyrke + og Lysstyrke - buttons to adjust the color temperature.

Billede: Visual representation of the adjustable color temperatures, ranging from warm (2500K) to neutral (5500K) to cool (8500K) light.

Activating Colorful Light Effects (RGB Mode):

The light wand features 7 colorful light effects: red, green, blue, orange, purple, light blue, and red & blue flash. Press the Valg af tilstand button to cycle through these RGB effects. Brightness can still be adjusted in these modes using the Lysstyrke + og Lysstyrke - knapper.

Billede: A visual guide to the 7 colorful light effects available, showcasing the vibrant range of colors the light wand can produce.

Opladning

The Andoer D2 light wand has a built-in 2600mAh rechargeable lithium battery. When the battery is low, the power indicator light will signal. To charge:

1. Connect the small end of the USB Type-C charging cable to the charging port on the light wand.
2. Connect the standard USB end of the cable to a USB power source (e.g., wall adapter, power bank, computer USB port).
3. The power indicator light will illuminate or change color to indicate charging. It will change again or turn off when fully charged.

A full charge provides approximately 2.5 hours of continuous use at maximum brightness.

Opretholdelse

• Clean the light wand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• If not used for extended periods, charge the battery every 3 months to maintain battery health.

Fejlfinding

Specifikationer

Garanti og support

Andoer products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Andoer webwebsted. Gem venligst din købsbevis til garantikrav.

Andoer Official Webwebsted: Andoer Store on Amazon