GEONFINO Smart Door Lock with Handle

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your GEONFINO Smart Door Lock with Handle, Model G4 Pro+G2. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The GEONFINO Smart Door Lock offers multiple unlocking methods including fingerprint, app control, passcodes, IC cards, mechanical keys, and Alexa voice commands (with included gateway). It is designed for enhanced home security and convenience.

2. Produktet er slutview

The GEONFINO Smart Door Lock is a comprehensive security solution featuring a robust design and advanced access options.

Figur 1: Forside view of the GEONFINO Smart Door Lock with Handle.

2.1. Inkluderede komponenter

• Lås (x1)
• Tastatur (x1)
• Interior Assembly (x1)
• Monteringsplade (x1)
• Square Pole (x1)
• Mounting Plate Screws (x4)
• RFID-kort (x2)
• Nøgler (x2)
• Strike/Strike Box (x1)
• Studs (x2)
• Latch/Strike Screws (x4)

2.2. Nøglefunktioner

• 6-i-1 oplåsning: Fingerprint, TTLock App, Passcodes, IC Card, Mechanical Key, and Alexa Voice Control (Gateway Included).
• Forbedret sikkerhed: Features a secure structure, high-security lock cylinder, and virtual password design to prevent peeping.
• TTLock-appkontrol: Manage access, generate temporary passcodes, view unlock records, and remotely control the lock.
• Lang batterilevetid: Up to 1 year of battery life with a USB-A emergency charging port.
• Nem installation: Designed for quick installation without external drilling, typically within 15 minutes.
• Vejrbestandig: IP65 rated, operating effectively in temperatures from -18.4°F to 120°F.

3. Installationsvejledning

Follow these steps carefully for proper installation. A detailed video guide is also available for visual assistance.

3.1. Kontrol før installation

• Ensure the hole in the door edge is 1 inch (25mm) deep.
• Confirm door thickness is between 1-3/5 inches to 2 inches (40mm to 50mm).
• Verify the backset is either 2-3/8 inches (60mm) or 2-3/4 inches (70mm).
• The hole diameter for the lock body should be ≥ 2-1/8 inches (54mm).

Figure 2: Required door dimensions for installation.

3.2. Installer låsen

Insert the latch into the door edge. If the backset is 2-3/8 inches (60mm), no adjustment is required. If it is 2-3/4 inches (70mm), slide the slot to the right to extend the latch. Secure the latch with screws.

3.3. Install the Lock on the Door Frame

Ensure the hole in the door frame is drilled a minimum of 1 inch (25mm) deep. Install the strike box and strike plate on the door frame, securing them with screws.

3.4. Confirm Door Handing Direction

Determine if your door is left-handed or right-handed from the outside. This is crucial for correct handle orientation.

3.5. Keypad Settings (Handle Orientation)

For a left-hand door, rotate the front handle 90° to the left. For a right-hand door, rotate the front handle 90° to the right. Insert the square pole and ensure it is pressed to the bottom.

3.6. Installer tastaturet

Install the keypad directly onto the door, ensuring the circular hole is centered with the square rod. Secure the mounting plate with screws.

3.7. Set up the Interior Assembly

Unscrew the rear handle screw and remove the rear handle. For a right-hand door, rotate the rear handle 90° to the left. For a left-hand door, rotate the rear handle 90° to the right. Install the rear handle as shown. Stuff the data cable into the door. Insert 4 AA batteries (not included) into the interior assembly.

3.8. Test låsen

After installation, test the lock's functionality by pressing the fingerprint sensor or using a mechanical key to ensure it operates normally.

3.9. Restore the Lock (Factory Reset)

To restore the lock to factory settings, press and hold the reset button (located on the interior assembly) for 6 seconds until you hear a beep sound. This will clear all existing settings.

4. Betjeningsvejledning

Your GEONFINO Smart Door Lock offers multiple convenient ways to access your property.

Figur 3: Overview of 6-in-1 unlocking options.

4.1. TTLock App Control

The TTLock app provides comprehensive control over your smart lock. Download the app from your device's app store.

• Tilføj lås: Open the TTLock app, click '+' to add your lock. The phone needs to be within 2 meters of the lock during pairing.
• Lås op/lås: Tap the unlock icon to unlock, long press to lock.
• Generer adgangskode: Create permanent, timed, one-time, erase, or custom passcodes for various access needs.
• Send e-nøgle: Grant access to others by sending an eKey via the app.
• Autoriseret administrator: Authorize other users as administrators with specific permissions.
• Tilføj fingeraftryk: Register up to 100 fingerprints for quick and secure access.
• Adgangslogfiler: View a history of all lock and unlock events.
• Fjernoplåsning: Enable remote unlocking via the app when connected to the G2 Gateway.
• Autolås: Konfigurer låsen til automatisk at låse efter en bestemt periode (5-60 sekunder).

4.2. Oplåsning med fingeraftryk

Place your registered finger on the sensor for quick unlocking. The lock supports up to 100 fingerprints.

Figure 4: Fingerprint sensor for one-touch unlocking.

4.3. Passcode Unlocking

Enter your registered passcode on the keypad. The virtual password design allows you to enter random digits before or after your actual code to prevent others from guessing your entry.

Figure 5: Anti-peeping password protection.

4.4. Oplåsning af IC-kort

Tap a registered IC card against the card reader sensor on the lock to unlock.

4.5. Mekanisk nøgleoplåsning

I tilfælde af nødsituation eller ved afladning af batteriet skal du bruge de medfølgende mekaniske nøgler til at låse døren op.

4.6. Stemmestyring (Alexa)

With the included G2 Gateway, you can connect your smart lock to Amazon Alexa for voice-activated unlocking. Ensure the gateway is properly connected to your Wi-Fi network and paired with the lock.

5. Vedligeholdelse

5.1. Udskiftning af batteri

The lock uses 4 AA batteries. When the battery is low, the lock will provide an alert. Replace all four batteries simultaneously with new ones. In case of complete battery depletion, use the USB-A emergency charging port to temporarily power the lock with a power bank.

Figure 6: Long battery life and emergency charging feature.

5.2. Rensning

Rengør låsens yderside med en blød, damp klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen eller de elektroniske komponenter.

6. Fejlfinding

• Låsen svarer ikke: Check battery levels. Use the USB-A emergency charging port if batteries are depleted.
• Fingeraftryk ikke genkendt: Sørg for, at din finger er ren og tør. Registrer dit fingeraftryk igen, hvis problemerne fortsætter.
• Handle direction incorrect: Refer to Section 3.4 and 3.5 for instructions on confirming door handing and adjusting handle orientation.
• Fjernoplåsning virker ikke: Verify the G2 Gateway is powered on, connected to Wi-Fi, and properly paired with the lock. Ensure 'Remote Unlock' is enabled in the TTLock app settings.
• Passcode issues: Ensure the correct passcode is entered. Try generating a new passcode via the app.

7. Specifikationer

8. Garanti og support

GEONFINO provides a 12-month warranty for all products. If you encounter any problems or have questions regarding your smart door lock, please contact our customer service team. We aim to reply within 24 hours.

For further assistance, please visit the official GEONFINO store or contact support through your purchase platform.